• 한국생산제조학회지
• /
• 제26권4호
• /
• pp.430-435
• /
• 2017

The effect of the surface profile on CFRP and aluminum metal bonding was studied. A small number of steps were made on the aluminum surface, and the shear stress and elongation were measured using a shear test after bonding with an autoclave method. As the number of surface steps increased, the shear stress and elongation increased. The surface bonding strength increased because of the effect of the mechanical and chemical bonding. When the number of effective stages was exceeded, the shear strength decreased again due to the aspect ratio of the step and the reduction of the penetration effect of the resin into the groove.

• 한국농공학회지
• /
• 제23권3호
• /
• pp.96-104
• /
• 1981

In order to investigate the characteristics of the shear strength of the unsaturated cohesive soils which has mean characters of sand and clay widely used for banking, I selected soil samples from An-sung district and, against it, performed direct shear test and unconfined compression test changing grain size, compaction energy and moisture content and also performed triaxial compression test under optimum moisture content. The results are as follows; 1.As the passing percent of the No. 200 sieve increased from 23.6% to 56.1%, cohesion increased from 0. 202kg/cm2 to 0. 398kg/cm2 under the direct shear test and from 0.38 kg/cm2 to 1. 05kg/cm2 under the tria4al compression test, internal friction angle decreased from 44. 78$^{\circ}$ to 34. 34$^{\circ}$ under the direct shear test and from 31. 88$^{\circ}$ to 13. 31$^{\circ}$ under the triaxial compression test. 2.Cohesion showed it's maximum value around OMC and internal friction angle showed a tendency to increase according to the decrease of water content but it's increasing ratio was relatively slow. 3.Decreasing ratio of cohesion and internal friction angle was relatively sensitive according to the decrease of compaction energy. 4.The smaller of the vertical stress and the coarser of the grain size of samples, changing of the volume showed a tendency to increase and as the increase of water content, the shear displacement (dh) at failure shear stress ($\tau$f) showed maximum and the $\tau$f-dh curve was gentle. 5.To synthesize the results of the direct shear test and the triaxial compression test, cohesion showed higher under the triaxial compression test and internal friction angle showed a tendeney to appear higher under the direct shear test. It seems that we can get correspondent results by removing the side friction of mold with soils and adjusting the vertical stress and shearing speed under the direct shear test.

• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.165-174
• /
• 2020

The enzyme-induced carbonate precipitation (EICP) method has been investigated to improve the hydro-mechanical properties of natural soil deposits. This study was conducted to explore the stiffness evolution during various stress scenarios. First, the optimal concentration of urea, CaCl₂, and urease for the maximum efficiency of calcite precipitation was identified. The results show that the optimal recipe is 0.5 g/L and 0.9 g/L of urease for 0.5 M CaCl₂ and 1 M CaCl₂ solutions with a urea-CaCl₂ molar ratio of 1.5. The shear stiffness of EICP-treated sands remains constant up to debonding stresses, and further loading induces the reduction of S-wave velocity. It was also found that the debonding stress at which stiffness loss occurs depends on the void ratio, not on cementation solution. Repeated loading-unloading deteriorates the bonding quality, thereby reducing the debonding stress. Scanning electron microscopy and X-ray images reveal that higher concentrations of CaCl₂ solution facilitate heterogeneous nucleation to form larger CaCO₃ nodules and 11-12 % of CaCO₃ forms at the interparticle contact as the main contributor to the evolution of shear stiffness.

• 한국지반공학회지:지반
• /
• 제14권4호
• /
• pp.103-116
• /
• 1998

순수전단강도를 추정하기 위해 150 세트의 삼축시험 결과를 분석하였다. 내부마찰각은 Hoek와 Brown의 파괴조건계수 m이 증가하는데 따라 비 선형적으로 증가하였으나 순수전단강도 비례계수 1c는 비선형적으로 감소하였다. 압축강도의 전단강도에 대한 비는 내부마찰각의 비에 역비례하였다. 전단강도는 m에 반비례하였으나 내부마찰각은 비례하였다. 또 단축강도는 c에 비례하였다. 회 귀분석의 해석에 있어서 전단강도가 m과 단축압축강도의 주요 영향요소로 나타났다. 전단강도의 비례계수는 RMR의 증가에 따라 비선행적으로 증가하였으나 내부마찰각은 선형적으로 감소하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권1호
• /
• pp.119-129
• /
• 2002

Reinforced concrete haunched beams have been used for enhancement of shear resistance of beams to avoid the stress concentration. But American and British codes do not give my formula for the design of haunched beams. The purpose of this research is to experimentally investigate the shear failure of reinforced concrete punched beams for various haunch inclinations and shear span-to-depth ratios. The experimental results showed that even though shear behavior of haunched beam were similar to that of resembled rectangular beams, shear span-to-depth ratios and inclinations of haunch had effects on shear cracking strength.

• Computers and Concrete
• /
• 제20권4호
• /
• pp.469-481
• /
• 2017

This paper aims to analytically investigate the effect of shear stress at the concrete-steel interface on the mechanical behavior of the circular steel tube-confined concrete (STCC) stub columns with active and passive confinement subjected to axial compression. Nonlinear 3D finite element models divided into the four groups, i.e. circumferential-grooved, talc-coated, lubricated, and normal groups, with active and passive confinement were developed. An innovative method was used to simulate the actively-confined specimens, and then, the results of the finite element models were compared with those of the experiments previously conducted by the authors. It was revealed that both the predicted peak compressive strength and stress-strain curves have good agreement with the corresponding values measured for the confined columns. Then, the mechanical properties of the active and passive specimens such as the concrete-steel interaction, longitudinal and hoop stresses of the steel tube, confining pressure applied to the concrete core, and compressive stress-strain curves were analyzed. Furthermore, a parametric study was performed to explore the effects of the concrete compressive strength, steel tube diameter-to-wall thickness ratio, and prestressing level on the compressive behavior of the STCC columns. The results indicate that reducing or removing the interfacial shear stress in the active and passive specimens leads to an increase in the hoop stress and confining pressure, while the longitudinal stress along the steel tube height experiences a decrease. Moreover, prestressing via the presented method is capable of improving the compressive behavior of STCC columns.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.83-93
• /
• 2003

본 연구에서는 낙동강 하류 을숙도에 분포하는 0.558%의 세립분을 함유한 자연 사질토 지반에 대하여 느슨, 중간, 그리고 조밀한 지반 상태를 재현하여 초기정적전단응력의 영향을 정적 및 동적 시험을 통해 응력경로와 과잉간극수압 소산 및 잔류변형 거동을 규명하고, Bolton 이론에 의거한 파괴시 최대 유효마찰각을 상대밀도에 의한 영향과 구속압의 영향을 고려하여 제시하였다. 파괴선과 상전이점의 거리는 초기전단응력이 증가할수록 가까워지고, 느슨한 모래의 경우 그 영향이 커서 조밀한 모래의 응력경로로 접근하는 경향을 보인다. 압밀응력비 조건이 1.4에서 1.8로 변함에 따라, 상대밀도의 증가와 함께 보다 큰 액상화 저항강도를 보이고 조밀한 상대밀도 조건에서는 유사한 CSR값을 보였다.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.505-517
• /
• 2004

상자형보와 윈형기둥으로 구성된 강재교각 정합부의 응력평가식 제안에 대한 연구이다. 원형기둥을 각형으로 치환하여 사용하고 있는 기존의 응력평가식은 정합각도가 감소함에 따라 전단지언능력은 과소평가되고, 전단응력은 접협각도가 증가함에 따라 과대하게 평가되는 문제점이 있다. 따라서 이라한 문제점 을 보완하기 위해 다양한 매개변수, 즉 접합각도 (${\alpha}$), 전단지간/보의 폭비 (L/B) 기둥의 휨강성/보의 휨강성비 (k) 를 사용하여 유한요소해석을 수행하고 해석결과를 이용하여 기존 응력평가식의 문제점을 보완할 수 있는 응력평가식을 제안하였다. 한편, 허용응력 대비 극한내하력의 안전율을 검토하기 위해 재료 및 기하 비선형해석을 수행하여 제안식의 타당성을 확인하였다.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.90-96
• /
• 2009

The loading condition of actual construction works is complex. The shear effect of mixed-mode load component are crack propagation mechanism in step larger than the crack initial mechanism. Therefore, in this study received a mixed-mode loading on fatigue crack stress ratio on crack propagation path and speed of progress to learn whether stress affects crack propagation. ${\Delta}$ P a constant state of fatigue tests in Mode I, II give the same stress ratio, frequency 10Hz, sinusoidal waveform was used. A lower stress ratio fatigue crack propagation angle is small. This is less affected by the Mode II. Therefore, a mixed-mode fatigue crack propagation is to progress by the Mode. Stress ratio in a mixed mode crack in the path of progress and found a lot of impact.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.79-89
• /
• 2008

본 연구에서는 낙동강 유역에 분포하는 모래와 실트를 대상으로 실트 함유량에 따른 모래의 비배수 반복전단강도 특성을 파악하기 위하여 이방압밀비($K_c$=1.0, 1.5, 2.0)를 달리하여 일련의 비배수 반복삼축시험을 실시하였다. 시험결과 모든 $K_c$에서 실트 함유량이 증가함에 따라 반복전단응력비(CSR)가 감소하였으며, $K_c$가 증가할수록 실트 함유량 증가에 의한 CSR의 감소가 더 크게 나타났다. 전단시 발생되는 과잉간극수압은 $K_c$에 관계없이 실트 함유량 증가에 따라 초기 과잉간극수압이 크게 발생되어 CSR의 감소에 영향을 미쳤으며, 또한 압밀 후 시료의 skeleton 간극비를 산정하여 분석한 결과 실트 함유량 증가에 비례하여 전반적으로 skeleton 간극비가 크게 증가하여 초기 과잉간극수압의 증가와 더블어 CSR 감소의 주요원인으로 파악되었다.