• 패션비즈니스
• /
• 제7권6호
• /
• pp.50-56
• /
• 2003

Chitosan has been widely applied to the products in various industries such as textile fabrics, apparels, foods, medical area, etc. Cochineal has long been employed as one of natural dyestuffs in the textile industry. The effect of chitosan pre-treatment on the low-stress physical and mechanical properties of cochineal-dyed fabrics including cotton, silk, nylon and polyester fabrics was investigated in this study. The chitosan treatment and mordanting of the fabrics changed the bending, shear, compression, and surface properties of the fabrics. In cotton fabric specimens, while the increase of B(bending rigidity) of cotton is relatively high, the increase of G(shear rigidity) of cotton is relatively low. In nylon and PET fabric specimens, while the increase tendency of B is relatively low, that of G is high compared to the corresponding cotton fabrics.

• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.135-142
• /
• 2016

Purpose: The aim of this research was to evaluate the influence of different surface treatments on the shear bond strength of zirconia ceramic to composite resin. Methods: Seventy two cylinder-shape (diameter: 5 mm; height: 12 mm) blocks of experimental industrially manufactured Y-TZP ceramic were abraded with $125{\mu}m\;Al_2O_3$ particles and randomly divided into 4 groups. All the materials were categorized as group Gc(control group - composite resin veneering on zirconia surface), Gr - composite resin veneering after surface treatment of Rocatec system (3M ESPE, Seefeld, Germany) group; Gz - composite resin veneering after surface treatment of Zirconia primer (Z-primer, Bisco, U.S.A) group; Gm - composite resin veneering after surface treatment of zirconia primer (Monobond plus, ivoclar vivadent AG, Liechtenstein) group. Two different zirconia primers and Rocatec system were used to zirconia cylinders (n=16) onto the zirconia surface. Zirconia specimens, polished and roughened, were pretreated and composite bilayer cylinders bonded using conventional adhesive techniques. Results: Shear bond strengths were analyzed using single-factor ANOVA(p<0.05). Bond strength values achieved after airbone particle abrasion and zirconia surface pre-treatments(p<0.05). Conclusion: Shear bond strength tests denmonstrated that zirconia primer is a viable method to improved bond strength between zirconia ceramic core and veneering composites.

• 치위생과학회지
• /
• 제13권4호
• /
• pp.487-492
• /
• 2013

본 연구는 지르코니아 코어 표면처리 방법에 따른 코어와 도재와의 결합기전을 파악하여 도재 수복물의 문제점을 개선하고자 도재와 동일한 구조의 코어를 제작한 후 코어 표면의 거칠기 처리와 liner 적용 방법을 각각 달리한 4개 군의 전단결합강도의 차이를 분석한 바 다음과 같은 결론을 얻었다. 1. 코어의 표면 거칠기 처리 여부는 표면조도에 영향을 주었다(p<0.001). 2. 지르코니아 코어 표면을 표면 거칠기와 liner를 도포한 군(SLT군)이 23.19 MPa로 가장 높았고, 표면 거칠기만 적용한 군(ST군)이 21.17 MPa였으며, liner만 적용한 군(LT군)은 20.53 MPa였고, 표면 비처리 군(NT군)이 16.46 MPa으로 가장 낮은 값을 나타내(p=0.176) 표면처리에 따른 전단 결합강도에 차이가 있을 가능성을 나타냈다. 또한 표면 거칠기와 liner를 도포한 군(SLT군)과 표면 비처리 군(NT군)에서 두 군 간의 차이는 통계적으로 유의하였다(p<0.05). 3. 계면상태는 SLT군이 ST군과 LT군, NT군에 비해 도재결합의 응집된 상태를 나타냈다. 코어의 표면처리 특히 거칠기 처리는 지르코니아 코어와 도재의 물리적 결합 즉, 전단결합강도를 높일 수 있는 의미있는 과정임을 확인하였다.

• 접착 및 계면
• /
• 제12권3호
• /
• pp.99-104
• /
• 2011

21세기 들어 자동차 도료산업은 엄격한 환경규제 및 생산 효율성 향상 및 더 낮은 생산비용으로 자동차용 도료를 생산하기 위하여 세정 및 전처리 과정을 삭제한 pre-primed 도장 시스템이 연구되고 있다. 이러한 pre-primed 도료 시스템의 경우, 차체 조립 전 단계에 강판이 유기 도막으로 도장되어있기 때문에 기존의 용접을 통한 조립이 힘들어 용접공정을 대체할 수 있는 새로운 비용접식 접합기술의 개발이 필요한 실정이다. 본 연구에서 비용접식 pre-primed 시스템에 적용하기 위하여 유연성과 성형성이 향상된 polyester계의 primer 1과 polyurethane계의 primer 2를 개발하였다. 개발된 도료의 물리적인 물성과 도장면의 부착력 평가 결과, primer 1이 primer 2에 비하여 연필경도, 내용제성, 유연성 및 접착제와의 부착력이 뛰어남을 알 수 있었으며, 용접공정을 대신한 비용접식 pre-primed 시스템의 가능성을 확인할 수 있었다.

• 상하수도학회지
• /
• 제32권6호
• /
• pp.479-485
• /
• 2018

Large amounts of oily wastewater discharged from various industrial operations (petroleum refining, machinery industries and chemical industries) cause serious pollution in the aquatic environment. Although dissolved air flotation (DAF) separating oil pollutants using microbubbles represents current practice, bubble size cannot be selectively controlled, and lots of power is required to generate microbubbles. Therefore, to investigate performance of the DAF process, this study examined the distribution of different sizes of microbubbles resulting from changes in physical shear force via modifying shapes of a slit-nozzle without an additional power supply. Three types of slit-nozzles (different angle, shape and length of the slit-nozzle) were used to analyze the distribution of bubble size. At a slit angle of $60^{\circ}$, shear force was 4.29 times higher than a conventional slit, and particle size distribution (PSD) in the range between 2 and $20{\mu}m$ more than doubled. Treatment efficiency of synthetic oily wastewater through the coagulation-DAF process achieved 90% removal of COD by injecting $FeCl_3$ and PACl of 250 mg/L and 100 mg/L, respectively, and the same performance resulted using $FeCl_3$ of 200 mg/L and PACl of 80 mg/L employing a slit-nozzle angle of $60^{\circ}$. This study shows that a coagulation-DAF process using a modified slit-nozzle can improve the pre-treatment of oily wastewater.

• 한국해양공학회지
• /
• 제12권3호통권29호
• /
• pp.31-41
• /
• 1998

Single fiber fragmentation technique was used to evaluate the change of interfacial properties by degradation of fiber tensile strength in the fiber reinforced composites. The influences of fiber tensile strength on the interfacial properties have been evaluated by the fragmentation specimens(weak fiber samples) of glass fiber/epoxy resin that was made using the pre-degraded glass fiber in distilled water at $80^{circ}C$ for specified periods. The effects of the immersion time on the interfacial properties in the distilled water at $80^{circ}C$ also have been evaluated by the fragmentation specimens(original fiber samples) of glass fiber/epoxy resin that was made using the received glass fiber. As the result, the tensile strength of glass fiber was decreased with the increasing of the treatment time in the distilled water at $80^{circ}C$ and the interfacial shear strength was independent of the change of the glass fiber strength in the single fiber fragmentation test. But in the durability test using the single fiber fragmentation specimen, interfacial shear strength decreased with the increasing of the immersion time in distilled water ar $80^{circ}C$. And it turned out that the evaluating of interfacial shear strength using original fiber tensile strength was valuable in the durability test for the water environment by the single fiber fragmentation technique.

• Macromolecular Research
• /
• 제9권4호
• /
• pp.197-205
• /
• 2001

Platelet adhesion onto elastic polymeric biomaterials was tested in vitro by perfusing human whole blood at a shear rate of 100 sec$\^$-1/ for possible verification of mechanisms of initial platelet adhesion perfusion of blood on the polymeric substrates was performed after treatments either with or without pre-adsorption of 1% blood plasma, and either with or without residence of the protein-preadsorbed substrate in phosphate buffered solution. The surfaces employed were elastic polymers such as poly(ether urethane urea), poly(ether urethane), silicone urethane copolymer, silicone rubber and poly(ether urethane) with the anti-calcifying agent hydroxyethane bisphosphate. Each polymer surface treated was exposed in vitro to the dynamic, heparinized whole blood perfused for upto 6 min and the surface area of platelets initially adhered was measured by employing in situ epifluorescence video microscopy. The blood perfusion was performed on the surfaces treated at the following three different conditions: directly on the bare surfaces, after protein pre-adsorption and after residence in buffer for 3 days of the surfaces protein pre-adsorbed for 2 h. The effects of blood plasma pre-adsorption on the initial platelet adhesion was surface-dependent. The amount of the adsorbed fibrinogen and the surface coverage area of the adhered platelets were dependent on the surface conditions whether substrates were bare surfaces or protein pre-adsorbed ones. To test an effect of possible morphological (re)orientations of the adsorbed proteins on the initial platelet adhesion, the polymeric substrate pre-adsorbed with 1% blood plasma was immersed in phosphate buffered solution for 3 days and then exposed to physiological blood perfusion. The surface area of the platelets adhered on these surfaces was significantly different from that of the surfaces treated with protein pre-adsorption only. These results indicated that platelet adhesion was dependent on the surface property itself and pre-treatment conditions such as blood perfusion without any pre-adsorption of proteins, and blood perfusion either after protein pre-adsorption or after subsequent substrate residence in buffer of the substrate pre-adsorbed with proteins. Understanding of these results may guide for better designs of blood-contacting materials based on protein behaviors.

• 한국축산식품학회지
• /
• 제42권4호
• /
• pp.625-638
• /
• 2022

This study aimed to carefully investigate the effect of hydrolysis using Flavourzyme on meat quality, antioxidative status, and taste-related compounds in breast of Samgyetang that was supplemented with black garlic (BG). Four different treatment groups were compared: (1) conventional Samgyetang (control), (2) Samgyetang hydrolyzed with Flavourzyme (1%, v/w) (FS), (3) Samgyetang made with the BG extract without hydrolysis (NBG), and (4) BG samgyetang pre-treated with Flavourzyme (1%, v/w) in a water bath at 55℃ for 2.5 h and hydrolyzed before being processed (HBG). All the treatment groups were cooked by retorting at conditions 121℃ and 1.5 kg/cm² for 1 h. Improved umami profiles through the increase of umami-related nucleotides (5c-GMP, 5'-IMP) and free amino acids-aspartic acid and glumtamic acid, in Samgyetang breast was recorded following hydrolysis. The HBG group tended to impart stronger scavenging activity toward free radicals compared with the other two groups, while not differing with NBG group regarding suppressing malondialdehyde. Textural properties were improved through hydrolysis, wherein the shear force value decreased from 2.29 kgf in the control to 1.19 and 1.25 kgf in the FS and HBG group. Moisture percentages were highly retained, with the redness score increasing and the lightness color decreasing following hydrolysis. In conclusion, the results of this study can be a preliminary information of the effect of hydrolysis pre-treatment for BG samgyetang. Further experiments are required to compare various enzymes along with its organoleptic acceptances.

• 한국식품과학회지
• /
• 제41권1호
• /
• pp.32-36
• /
• 2009

농축시킨 Aloe vera gel을 동결건조하였을 때 그 농축도 차이에 의한 최종 건조분말의 물성 변화를 비교분석하였다. 분말의 최종 수분함량은 거의 차이가 없었으며. 점성 측정에서는 높은 농축 조건의 경우 전형적인 shear thinning 현상과 non-Newtonian 유체의 속성을 나타냈다. 이에 비하여 낮은 농축 조건의 경우 Newtonian 액체의 성질과 고형분이 입자가 아닌 풀린 형태로 존재할 때 나타나는 현상을 보였다. 분말이 물에 용해되는 동안 전기전도도의 변화를 실시간으로 측정한 결과 평형상태에 도달하였을 때, 가장 높은 농축 조건에서 전기전도도가 가장 낮게 나타나, 비전해질성 물질의 용해도가 가장 큰 것으로 해석되었다. 분말의 등온흡습성에서는 농축이 증가할수록 수분 흡착과 결합수의 양이 작아지는 것으로 분석되었다. 결과적으로 Aloe vera gel을 농축하여 동결건조할 때는 그 농축도에 따라 점성, 현탁시 전기전도도에 따른 용해성, 등온흡습성이 변하는 것으로 나타나, 특정 품질의 동결건조제품을 얻기 위해서는 그에 대한 농축의 최적화가 필요한 것으로 생각된다.

• 한국식품저장유통학회지
• /
• 제30권5호
• /
• pp.785-796
• /
• 2023

The aim of this study was to elucidate chemical structures and rheological properties of arabinogalactans (AGs) isolated from three legumes including black gram (BG), great northern bean (GNB), and California small white bean (CSWB). The ratio of galactose to arabinose (G/A) in three legumes increased in the order of BG > GNB > CSWB. The rheological measurements of 1-5% (w/v) AG solutions revealed Newtonian and non-Newtonian flow behaviors. BG exhibited yield stress, indicating plastic behavior. Small-amplitude oscillatory tests indicated viscoelastic properties of BG, GNB, and CSWB ranging from solid-like, paste-like, and liquid-like behaviors, respectively. Small-strain oscillatory tests were conducted to assess the structure recovery of the AGs after pre-shearing. G" values of BG and GNB increased, but those of CSWB remained constant after shearing. These results suggest that the chemical structures of the AGs, particularly their G/A ratios, influence their rheological properties.