• 대한기계학회논문집
• /
• 제14권5호
• /
• pp.1234-1243
• /
• 1990

본 연구에서는 선회가 없는 중심기류와 주위기류의 난류 전단층에서 형성되는 난류확산화염의 천이영역(transition region)에 주목하여 전단층내의 혼합작용과 화염 구조와의 상호작용을 규명하기 위해 거시적 및 순간적인 화염구조에 대해 실험적으로 조사 연구한 결과를 보고한다.

• 대한기계학회논문집
• /
• 제9권4호
• /
• pp.403-413
• /
• 1985

본 논문에서는 수직벽 하류에 형성되는 박이 전단층의 발전과 재부착 그리고 재발전 경계층에 대해 평균 속도, 벽면의 압력 분포, 난류 강도, 레이놀즈 전단 압력 및 아직 수직벽에 대해서는 보고된바 없는 난류 떨림 속도 성분들의 3승곱 통계치를 측정하여 난류 구조의 변화를 분석하고 이를 수치적 계산 모델개발의 자 료로 제공하고자 함이 이 연구의 목적이다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권1호
• /
• pp.17-23
• /
• 2021

In order to investigate change of shear strength of coastal muddy sediment by mixing pretreated oyster shells with different pyrolysis temperatures and particle sizes, a vane shear test was carried out. The shear strength of the sediment with oyster shells pyrolyzed at 800℃ was twice higher than that of the control, with a maximum shear strength of ca. 0.2 kPa. The Ca2+ concentration in the pore water was the highest at sediment with oyster shells pyrolyzed at 800℃ with a concentration of ca. 790 mg/L. From the above results, it is concluded that the application of the oyster shells pyrolyzed at 800℃ can affect the increase in shear strength of coastal sediments through the aggregation of clay particles and pozzolanic reactions with sediments.

• KSBB Journal
• /
• 제30권6호
• /
• pp.307-312
• /
• 2015

Transgenic rice cells using RAmy3D promoter can provide high productivity, and the production of recombinant protein is induced by sugar starvation. In this system, productivity was reduced during the scale-up processes. To ensure the influences of shear stress and oxygen transfer rate, working volume and mixing performances were investigated under various agitation speeds and working volumes. In addition, inoculation methods including suspended cells and filtered cells were compared. Working volumes and shaking speeds were 300, 450 mL and 80, 120 rpm, respectively. Hydrodynamic environment of each condition was measured numerically like mixing time and $k_La$. Good mixing performance and high shear stress were measured at high agitation speed and low volume. The highest level of hCTLA4Ig was 30.7 mg/L at 120 rpm, 300 mL. When conditioned medium was used for inoculation, increased cell growth was noticed during the day 0~4 and decreased slower than filtered cells. Compared with filtered cells, the maximum hCTLA4Ig level reached 37.8 mg/L at 120 rpm, 300 mL and lower protease activity level was observed. In conclusion mixing performance is critical factor for productivity and conditioned medium can have a positive effect on damaged cells caused by hydrodynamic shear stress.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.495-506
• /
• 2013

본 연구에서는 전단류 분산이 이송과 난류에 의한 확산의 결합에 의해 발생한다는 Taylor (1954)의 가정을 바탕으로 개념적 모형을 구성하고, 이를 3차원 개수로에 적용하여 오염물질의 혼합과정을 재현할 수 있는 시간분리 혼합모형(Time-split Mixing Model; TMM)을 개발하였다. 개발된 모형은 연산자 분리 기법(operator split method)과 유사하게 혼합과정을 종방향 혼합과 횡방향 혼합으로 분리하고, 유속 연직편차에 의한 농도분리과정과 난류확산에 의한 연직방향 혼합과정을 순차적으로 반복 계산함으로써 2차원 이송-분산을 재현한다. 수치모의 결과, 제안된 모형은 수로벽면에 의한 농도중첩 효과를 잘 반영하고 있으며, Taylor 구간 내에서 2차원 이송-분산 모형의 해석해와 거의 일치하고 있음을 확인하였다(Chatwin, 1970). 본 모형은 하상경사, 하폭 대 수심 비, 혼합시간 등의 변화에 따라 분산 정도를 달리 재현하고 있으며, 산정된 종분산계수는 Elder(1959)가 제안한 상수값과는 달리 혼합시간에 따라 변화하는 양상을 나타냈다. 횡분산계수의 경우, Sayre와 Chang(1968), Fischer 등(1979)이 실험을 통해 제시한 값과 유사한 범위를 나타냈다.

• 대한기계학회논문집B
• /
• 제22권3호
• /
• pp.316-325
• /
• 1998

The objective of this study is to investigate the role of large-scale coherent structures in a spatially developing plane mixing layers. To achieve this, we have to look into the mutual interactions between three-dimensional large-scale coherent structures and the mean flow. Our attention will be focused on the energy exchange mechanism between the various modes, and the effects of the nonlinear evolution of the phases of the interacting modes. Linear stability of the three-dimensional viscous shear layer is formulated and solved as the basis for the solution of the nonlinear formulation based on the energy method. The importance of the initial conditions that may affect the evolution of the flow has been examined. It has been numerically calculated the nonlinear effects arising from the interactions among the three-dimensional large-scale coherent structures in a spatially developing plane mixing layers. The results of this study provide useful parametric information for the control of shear layer in practical applications in the mixing and transport augmentation.

• 대한토목학회논문집
• /
• 제26권4B호
• /
• pp.335-344
• /
• 2006

본 연구에서는 Taylor의 이론, 즉 종방향 이송과 횡방향 확산이 서로 독립적으로 일어나며 두 과정이 서로 균형을 이룬다는 개념을 바탕으로 순차혼합모형을 제안하였다. 서로 다른 혼합시간과 유속 분포 등을 사용하여 수치모의를 실시하였으며, 여기서 얻어진 단면평균 농도분포를 1차원 종분산모형과 2차원 이송-분산 모형과 비교하였다. 그 결과, 순차혼합모형이 1차원 종분산모형으로 요약되는 Taylor의 이론을 잘 구현하고 있음을 알 수 있었다. 2차원이송-확산모형과의 비교를 통해 혼합 시간과 횡확산계수와의 관계를 밝힐 수 있었으며, 따라서 순차혼합모형이 1차원 종분산모형뿐 아니라 2차원 이송-분산모형까지 연계하여 전단류 분산을 통합적으로 설명하는 모형임을 알 수 있었다. 본 연구에서는 순차혼합모형의 수치모의 결과와 1차원 종분산모형과의 적합을 통해 종분산계수를 결정하고, 회귀식을 사용해 종분산계수 추정식을 제안하였다. 본 연구에서 제안한 종분산계수 추정식은 38개의 현장실험자료를 사용하여 검증하였다. 그 결과, 하폭 대 수심 비가 비교적 작은 하천에 대해서 높은 신뢰성을 나타내었으며, 대체적으로 기존의 경험식과 비슷한 신뢰도를 나타내었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.125-128
• /
• 2005

The dispersion of carbon nanofiber (CNF) was carried out by solution blending, mechanical mixing, and sonication. CNFs at levels of 5-50% fiber weight content were mixed with polypropylene (PP) powder, and then were melt-mixed using a twin-screw extruder. For the further alignment of fibers, extruded rods were stacked uni-directionally in the mold cavity for the compression molding. For the evaluation of mechanical properties of nanocomposites, tension, in-plane shear, and flexural tests were conducted. CNF/PP composites clearly showed reinforcing effect in the longitudinal direction. The tensile modulus and strength have improved by 100% and 40%, respectively for 50 % fiber weight content, and the flexural modulus and strength have increased by 120% and 25%, respectively for the same fiber weight content. The shear modulus showed 65% increase, but the strength dropped sharply by 40%. However, the property enhancement was not significant due to the poor adhesion between fiber and matrix. In the transverse direction, the tensile, flexural, and shear strength decreased as more fibers were added.

• Carbon letters
• /
• 제15권4호
• /
• pp.255-261
• /
• 2014

Multi-walled carbon nanotube reinforced epoxy composites were fabricated using shear mixing and sonication. The mechanical, viscoelastic, thermal, and electrical properties of the fabricated specimens were measured and evaluated. From the images and the results of the measurements of tensile strengths, the specimens having 0.6 wt% nanotube content showed better dispersion and higher strength than those of the other specimens. The Young's moduli of the specimens increased as the nanotube filler content was increased in the matrix. As the concentrations of nanotubes filler were increased in the composite specimens, their storage and loss moduli also tended to increase. The specimen having a nanotube filler content of 0.6 wt% showed higher thermal conductivity than that of the other specimens. On the other hand, in the measurement of thermal expansion, specimens having 0.4 and 0.6 wt% filler contents showed a lower value than that of the other specimens. The electrical conductivities also increased with increasing content of nanotube filler. Based on the measured and evaluated properties of the composites, it is believed that the simple and efficient fabrication process used in this study was sufficient to obtain improved properties in the specimens.

• KSBB Journal
• /
• 제13권6호
• /
• pp.700-705
• /
• 1998

Studies were made to investigate effects of the scale-up of stirred tank bioreactors on cell growth and alkaloids production for suspension cultures of Eschscholtzia californica. In the 1.5 L STR, cell lysis was observed at 110 rpm or higher agitation speed. The agitation speed of 30 L STR was 43.7 rpm to maintain the same shear stress developed in 1.5 L STR of 100 rpm. As a result of scale-up from 1.5 L to 30 L STR, the specific growth rate was decreased from 0.12 to 0.07 day-1. The alkaloids productivity was also decreased from 0.24 to 0.14 mg/L-day. Changes of mixing performance and oxygen transfer were studied to explain the decrease of cell growth and alkaloids production. Decreased oxygen transfer rate coefficient(KLa) and increased mixing time by the scale-up was observed at various aeration rates.