• 암석학회지
• /
• 제24권2호
• /
• pp.125-139
• /
• 2015

거정 장석반정을 다량 함유하는 청산화강암이 연성전단변형을 받아 압쇄암화되는 동안에 일어난 미구조 변화를 파악하기 위해 변형된 청산화강암의 암석구조와 미구조 연구를 수행하였다. K-장석에서 특징적인 미구조는 미세킹크, 미세단열, 밀메카이트, 플레임 퍼어사이트, 코아 외부에 아입자 발달이 없는 코아-맨틀구조 등으로 인지된다. 미세킹크는 미세 단열되거나 미단열된 K-장석들에서 모두 관찰되고, 미세킹크의 축 방향은 미세단열에 의해 경계져 있는 양쪽 K-장석으로 연장된다. 밀메카이트와 플레임 퍼어사이트는 미세 단열된 K-장석들의 입계에 고 변형량의 집중으로 발달한다. 사장석에는 미세단열, 변형쌍정, 킹크대 등이 우세하게 관찰된다. 거정 사장석 반정의 입도 세립화는 역시 미세단열작용에 의해 진행되었다. 그러나 미세 단열된 K-장석과 달리 미세 단열된 사장석에는 코아-맨틀구조가 관찰되지 않는다. 화성기원의 누대구조를 중첩하는 변형쌍정은 변형정도가 낮은 저 변형암에서 종종 관찰된다. 고 변형암에서 변형쌍정의 엽층들은 일반적으로 공액성 킹크대의 둔각 이등분선 방향으로 발달하고, 미세단열 내지 미세단층 되어 무질서한 배열을 보인다. 따라서 이와 같은 특징적인 미구조로부터 청산화강암의 압쇄암화작용 동안에 미구조는 다음과 같이 발달하였음을 제시한다: 거정 K-장석 반정에 미세킹크의 출현과 사장석에 킹크대와 변형쌍정의 출현, 미세단열작용에 의한 거정 장석반정들의 입도 세립화, 미세 단열된 K-장석에 밀메카이트와 플레임 퍼어사이트 그리고 입계이동 재결정작용에 의한 K-장석 조각들의 입도 세립화와 함께 코아-맨틀구조의 출현.

• 전산구조공학
• /
• 제2권1호
• /
• pp.65-70
• /
• 1989

우리는 생활주변에서 파이프의 사용을 흔히 볼 수 있다. 그 만큼 파이프의 소요량은 우리 생활에서 엄청난 양이라 할 수 있는데 그것이 기존 재료로는 콘크리트나 철강제품이 대부분을 차지하고 있다. 요즈음 대체 재료로써 복합재료가 여러 산업분야에서 각광을 받고 있다. 처음 항공분야에서 사용이 시작되어 제품의 우수성 뿐 아니라, 그 값이 점차 낮아짐에 따라 여러 분야에서 사용되고 있다. 복합재료는 내구성, 내열성, 내부식성 등 다른 어느 재료보다 좋은 성질을 가지고 있으며 특히 중량이 가볍다. 파이프 매설 공사에 있어서 운반비의 비중은 전체 공사비에 약 20-40%에 달할 만큼 크다. 따라서 복합재료의 선택은 그 비용을 감소시킬 수 있을 뿐 아니라 내구성, 내열성 등 복합재료의 여러가지 우수성을 동시에 가질 수 있다. 그리고 재료의 발달이 가속되고 있어 앞으로 유용성은 더욱 커질 것이다. 지하매설 파이프로써 반경에 비해 두께가 얇은 관인 경우 큰 변형이 발생할 것이다. 따라서 기하학적 비선형성을 고려하여야 한다. 이를 위해 변형 후의 형상에 대해 평형방정식을 세웠으며, 이를 Galerkin's method에 의해 풀었다. 하중조건은 파이프가 땅속에 묻히게 되므로 수직하중은 매설깊이에 비례하며 수평하중은 수평변위에 비례하게 가정하였다. 복합재료로 만들어진 파이프는 층(layer)수와 fiber 방향 등에 따라 강성이 틀려지며 또한 흙의 종류와 발생되는 변위에 따라 파이프-흙간의 상호작용이 달라진다. 본 연구에서는 복합재료로 만들어진 파이프가 지하에 매설된 경우 기하학적 비선형을 고려한 해석방법을 제시하며 파이프 강성에 미치는 여러 인자에 대해 고찰해 보았다. 결과가 유한요소법에 의해 검증되었다. 기술고도화를 위한 과감한 측정관련 투자 결과가 제품의 불량감소에 크게 영향을 준다는 사실이 밝혀졌다. 연구결과에 따른 주요내용과 평가분석 모형을 제시한다.을 나타냄으로써 누에소화액 protease에 의하여 용해되지 않았음을 보여 주었다. 4. 결정성독소의 amino산 조성은 subsp. israelensis에서는 aspartic산이 14.5%로 가장 많은 비율을 차지하였고 그외 4개의 subsp.에서는 glutamic산이 13.9-14.6%로 가장 많았다. 5. 결정성독소의 면역학적 특성을 보면 subsp. israelensis의 항체는 그것의 항원과만 반응하고 그외 4개의 subsp.의 항체는 각각의 항원과 그리고 서로 다른 항원과 교호하여 반응하였다.화지방산을 다량으로 함유한 칠성장어유 및 옥수수유는 동맥경화증 랫트에 있어 생체내 지질대사에 영향을 미침으로써 혈청지질치를 저하시키고 동맥벽내에 지방침착을 억제시켰으며, 이러한 효과는 n-6계 다불포화지방산을 많이 함유하고 있는 옥수수유보다 n-3rP 다불포화지방산을 다량으로 함유한 칠성장어유에 더욱 크게 나타났다isozyme but not with p. esocinus B4 isogyme, reflecting that subunit B is less conservative in its evolution.e bands (fractions) with 290 Kd to 23 Kd molecular weight, and 8 bands of these detected bands developed strongly by silver stain. In serological test, ELISA, we recognized the cross-reaction

• 소성∙가공
• /
• 제22권5호
• /
• pp.258-263
• /
• 2013

The deformation behavior of NIMONIC 80A was studied in the high temperature range of $900{\sim}1200^{\circ}C$ and for strain rates varying between 0.02 and $20s^{-1}$ via the hot compression test. Processing maps for hot working were constructed on the basis of the power dissipation efficiency using a dynamic material model. The results showed that the strength during hot compression increased with increasing strain rate and decreasing temperature. At low strains, the processing map of NIMONIC 80A did not reveal any instability domain regardless of the strain rate and temperature. However, at high strains, the processing map exhibited an instability domain at a low strain rate of $0.2s^{-1}$ and within a temperature range of $900{\sim}960^{\circ}C$. In the instability domain, the deformed microstructure exhibited shear bands and carbide precipitation while, in the safe domain, full recrystallization occurred.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.504-509
• /
• 2009

The Zr-based bulk metallic glass matrix composites of a mixture of gas-atomized metallic glass powders and Fe-based nanostructured powders were fabricated by spark plasma sintering. The Fe-based nanostructured powders adopted for the enhancement of plasticity were well distributed in the matrix after consolidation, and the matrix remains as a fully amorphous phase. The successful consolidation of metallic glass matrix composite with high density was attributed to viscous flow in the supercooled liquid state during spark plasma sintering. Unlike other amorphous matrix composites, in which improved ductility could be obtained at the expense of their strength, the developed composite exhibited improvement both in strength and ductility. The ductility improvement in the composite was considered to be due to the formation of multiple shear bands under the presence of the Fe-based nanostructured particles.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.67-70
• /
• 2000

Mechanical properties of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites fabricated by the reaction squeeze casting were compared with those of (15%$AI_20_3{\cdot}SiO_2$)/Al composites. Intermetallic compound formed by reaction between molten aluminum and reinforcing powder was uniformly distributed in the Al matrix. These intermetallic compounds were identified as $Al_3$NI using EDS and X-ray diffraction analysis. Microhardness and flexural strength of hybrid composites were higher than that of (15%$AI_20_3{\cdot}SiO_2$)/Al Composite. In-Situ fracture tests were Conducted on (15%$AI_20_3{\cdot}SiO_2$)/Al Composites and (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites to identify the microfracture process. It was identified from the in-situ fracture test of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al composites, microcracks were initiated mainly at the short fiber / matrix interfaces. As the loading was continued, the crack propagated mainly along the separated interfacial regions and the well developed shear bands. It was identified from the in-situ fracture test of (10%$AI_20_3{\cdot}SiO_2$+5%Ni)/Al hybrid composites, microcracks were initiated mainly by the short fiber/matrix interfacial debonding. The crack proceeded mainly through the intermetallic compound clusters

• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.1101-1108
• /
• 2018

The aim of this study was to investigate the effects of dry-aging (DA) and the cooking process on the myofibril protein functionalities and in vitro digestibility of proteins in beef loin. Six sirloins from beef were dry-aged for 28 d, and the control group (n=6) was analyzed 2 d postmortem for this study. Dimensional changes (reduction of thickness and surface shrinkage) after cooking were significantly greater in the control group than the DA group, whereas the shear force of the DA group was significantly lower than that of the control. Effect of cooking on aggregation, hydrophobicity, and in vitro digestibility were significantly higher in the DA group than in the control. After cooking, the protein in DA sirloins was more oxidized than in the control samples. According to the sodium dodecyl sulfate-polyacrylamide gel electrophoresis result, the low molecular weight bands (below 17 kDa) increased in the DA group, finding that the protein characteristics of dry-aged beef was affected by cooking.

• Journal of the korean society of oceanography
• /
• 제38권3호
• /
• pp.122-134
• /
• 2003

Low-pass filtered time series of wind, coastal temperature, sea level and current were analyzed to understand the coastal upwelling processes in the southeast coast of Korea. Southerly winds favorable for coastal upwelling were dominant in summer of 1997. Total period of four major wind events amounts to 58 days during one hundred days from June to early September. Coastal temperature is most sensitive to variations of wind. The time lag between the onset of southerly (northerly) winds and decrease (increase) of temperature is 3-18 hours. In the frequency domain the coherent bands have periods of 2.4 and 4.0-5.4 days with respective phase lags of 17 and 27-37 hours. Despite the sensitive response, the magnitude of temperature change is not quantitatively proportional to the intensity or duration of the wind, because it depends on the degree of baroclinic tilting of isotherms built dynamically by the strong Tsushima Warm Current (TWC). Current is particularly strong near the coast and has a large vertical shear during the upwelling periods, which is associated with the baroclinic tilting. Both of current and sea level are poorly coherent with wind or temperature except for the period of 4 days.

• 천문학회보
• /
• 제42권2호
• /
• pp.54.3-55
• /
• 2017

The Deep Lens Survey (DLS), a precursor to the Large Synoptic Survey Telescope (LSST), is a 20 deg2 survey carried out with NOAO's Blanco and Mayalltelescopes. DLS is unique in its depth reaching down to ~27th mags in BVRz bands. This enables a broad redshift baseline and is optimal for investigating cosmological evolution of the large scale structure. Galaxy-galaxylensing is a powerful tool to estimate averaged matter distribution around lensgalaxies by measuring shape distortions of background galaxies. The signal from galaxy-galaxy lensing is sensitive not only to galaxy halo properties, but also to cosmological environment at large scales. In this study, we measure galaxy-galaxy lensing and galaxy clustering, which together put strong constraints on the cosmological parameters. We obtain significant galaxy-galaxy lensing signals out to ~20 Mpc while tightly controlling systematics. The B-mode signals are consistent with zero. Our lens-source flip test indicates that minimal systematic errors are present in DLS photometric redshifts. Shear calibration is performed using high-fidelity galaxy image simulations. We demonstrate that the overall shape of the galaxy-galaxy lensing signal is well described by the halo model comprised of central and non-central halo contributions. Finally, we present our preliminary constraints on the matter density and the normalization parameters.

• 소성∙가공
• /
• 제18권6호
• /
• pp.500-507
• /
• 2009

Tensile deformation behavior with different strain rate was investigated. $Zr_{56.2}Ti_{13.8}Nb_{5.0}Cu_{6.9}Ni_{5.6}Be_{12.5}$(bulk metallic glass alloy possessed crystal phase which was called $\beta$-phase of dendrite shape, mean size of $20{\sim}30{\mu}m$ and occupied 25% of the total volume) was used in this study. Maximum tensile strength was obtained as 1.74GPa at strain rate $10^2s^{-1}$ and minimum strength was found to be 1.6GPa at $10^{-1}s^{-1}$. And then, maximum plastic deformation occurred at the strain rate of $5{\times}10^{-2}s^{-1}$ and represented 1.75%, though minimum plastic deformation showed 0%. In the specific range of strain rate, relatively higher plastic deformation and lower ultimate tensile strength were found with lots of shear bands. The fractographical observation after tensile test indicated that vein like pattern on the fracture surface was well developed especially in the above range of strain rate.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.353-354
• /
• 2009

Tensile deformation behavior with different strain rate was investigated. $Zr_{56.2}Ti_{13.8}Nb_{5.0}Cu_{6.9}Ni_{5.6}Be_{12.5}$ (bulk metallic glass alloy possessed crystal phase which was called $\beta$-phase of dendrite shape, mean size of $20{\sim}30{\mu}m$ and occupied 25% of the total volume) was used in this study. Maximum tensile strength was obtained as 1.74Gpa at strain rate of $10^2/s$ and minimum strength was found to be 1.6GPa at $10^{-1}/s$. And then, maximum plastic deformation occurred at the strain rate of $5{\times}10^{-2}/s$ and represented 1.75%, though minimum plastic deformation showed 0%. In the specific range of strain rate, relatively higher plastic deformation and lower ultimate tensile strength were found with lots of shear bands. The fractographical observation after tensile test indicated that vein like pattern on the fracture surface was well developed especially in the above range of strain rate.