• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.44-50
• /
• 2013

In this paper, we present a circularly polarized (CP) composite cavity-backed crossed dipole antenna for global positioning system (GPS) applications. We produce the CP radiation by crossing two dipoles through a $90^{\circ}$ phase delay line of a vacant-quarter printed ring, which also has a broadband impedance matching characteristic. Two techniques, insertion of meander lines in the dipole arm and arrowhead-shaped trace at its end, are employed to reduce the sizes of the primary radiation element. The compact radiator is backed by a cavity reflector to achieve a wide CP radiation beamwidth. The proposed antenna exhibits a measured bandwidth of 1.450~1.656 GHz for a voltage standing wave ratio (VSWR) < 2 and 1.555~1.605 GHz for AR < 3-dB. At 1.575 GHz, the antenna has a gain of 7 dBic, a frontto-back ratio of 27 dB, AR of 1.18 dB, and 3-dB AR beamwidths of $130^{\circ}$ and $132^{\circ}$ in the x-z and y-z planes, respectively.

• 한국전자파학회논문지
• /
• 제10권1호
• /
• pp.122-132
• /
• 1999

본 논문에서는 37~40 GHz 대의 직경 30 cm의 소형 경면수정 ADE 반사경 안테나를 설계 제작하고 복사 특성을 고찰하였다 안테나 설계시 개구면 전계분포는 균일분포와 포물분포가 결합된 전계분포로 가정하고 빔폭, 개구연효율, 사이드로브 레벨 특성의 변화를 고찰하고 이것을 설계에 이용할 수 있도록 하였다. 설계 제작된 안테나의 이득과 사이드로브 레벨은 40 GHz에서 39.9 dBi(효율 : 61.9 %)와 -18.8 dB로 측정되었다. 이는 설계시 목표했던 효율 60 % 이상, 사이드로브 레벨 -20 dB 이하에 근접한 것으로 나타났다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.161-163
• /
• 2003

Ring-shaped electrodeless fluorescent lamp is removed the internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. The ring-shaped electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250[㎑]and some specific conditions. The optical measurement measured luminance and a temperature and an optical spectrum distribution for 10 minutes in a one minute interval at the same time.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.19-20
• /
• 2000

We have developed the 12.1" SVGA reflective type color TFT-LCD(Thin Film Transistor - Liquid Crystal Display) with the high aperture ratio and well designed reflector for the applications such as mini note PC, Note PC and electronic book. The panel shows the high reflectance(30%) and contrast ratio(20:1) resulted from optimizing the optical films and designing the embossing shaped reflector. By improving the chromacity, the color reproducibility was increased up to 20%. As removing the backlight unit, we reduced the power consumption, thickness and weight of the panel to 0.8W, 2.2mm, and 250gram, respectively. According to the above performances, we have obtained fabrication process for mass production, and furthermore, could have access to fast market launching.

• 전자공학회논문지T
• /
• 제36T권4호
• /
• pp.103-109
• /
• 1999

본 논문에서는 2-층의 유전체로 구성하여 한방향 복사특성을 갖는 T-모양 급전선의 슬롯 안테나인 새로운 구조를 제안하였다. 또한 양방향으로 복사특성을 갖는 슬롯 안테나는 한방향으로만 복사하기를 원할 경우, 반사판을 별도로 설치해야 한다. 그러나 여기에서 제시한 안테나는 별도의 반사판 설치가 필요없게 된다. T-모양의 마이크로스트립 급전 구조는 슬롯의 폭 변화에도 임피던스 정합이 쉽게 이룰 수 있었다. 그리고 슬롯 안테나의 대역폭은 슬롯 폭에 비례하여 확장되는 특성을 얻었다. 여기서 제시한 급전 구조는 방사저항이 낮은 값으로 일정하게 유지되어 슬롯 폭과 거의 무관한 좋은 특성을 얻었다. FDTD법으로 모델링하여 전계분포를 시간 영역에서 계산하였고, 이를 Fourier 변환시켜 슬롯 안테나의 반사손실, 전압 정재파비, 복사 패턴을 주파수 영역에서 계산하였다. 측정한 결과로부터, 대역폭은 중심 주파수 2.5GHz에서 약 34.8%의 광대역 특성을 보였다. 측정치들은 계산치들과 비교적 잘 일치하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.69-72
• /
• 2004

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved quality of the lighting space. Above all, the advantage of ring-shaped electrodeless fluorescent lamp is the removal of internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. The ring-shaped electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. Therefore, the life time of ring-shaped electrodeless fluorescent lamps is substantially higher than that of conventional fluorescent lamps and last up to 60,000 hours. In this paper, we present measurement results of electrical characteristics of a ring-shaped electrodeless fluorescent lamp as a function of frequency and number of coil turns using a highly permeable Mn-Zn ferrite. It is found that the impedance are increased while the quality factor decreases as frequency increases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.521-524
• /
• 2003

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved quality of the lighting space. Above all, the advantage of ring-shaped electrodeless fluorescent lamp is the removal of internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. The ring-shaped electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. Therefore, the life time of ring-shaped electrodeless fluorescent lamps is substantially higher than that of conventional fluorescent lamps and last up to 60,000 hours. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250kHz and some specific conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.312-315
• /
• 2003

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved quality of the lighting space. Above all, the advantage of ring-shaped electrodeless fluorescent lamp is the removal of internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. The ring-shaped electrodeless lamp is intended as a high efficacy replacement for the incandescent reflector lamp in many applications. Therefore, the life time of ring-shaped electrodeless fluorescent lamps is substantially higher than that of conventional fluorescent lamps and last up to 60,000 hours. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250[kHz] and some specific conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.220-221
• /
• 2006

In recent, there have been several developments in lamp technology that promise savings in electrical power consumption and improved Quality of the lighting space. Above all, the advantages of ring-shaped electrodeless fluorescent lamp are the removal of internal electrodes and heating filaments that are a light-limiting factor of conventional fluorescent lamps. Therefore, the life time of ring-shaped electrodeless fluorescent lamps is substantially higher than that of conventional fluorescent lamps last up to 60,000 hours, There are intended as a highly efficient replacement for the incandescent reflector lamp in many applications. In this paper, maxwell 3D finite element analysis program (Ansoft) was used to obtain electromagnetic properties associated with the coil and nearby structures. The electromagnetic emitting properties were presented by 3D simulation software operated at 250 kHz and some specific conditions. In addition, the optical characteristics of ring-shaped electrodeless fluorescent lamp were measured including light flux, efficiency and color temperature for each case.

• 한국전자파학회논문지
• /
• 제20권4호
• /
• pp.344-350
• /
• 2009

본 논문에서는 새로운 빔 조향 방식을 갖는 하이브리드 안테나를 제안하였다. 본 안테나는 카세그레인 안테나 구조로서, 파라볼라 구조의 고이득 특성을 구현하기 위하여 설계된 주반사판과 평판형 구조로서 모든 방향에서 ${\pm}3^{\circ}$ 회전할 수 있도록 설계된 부반사판의 경사각을 이용하여 안테나 빔 조향(beam pointing)을 제어할 수 있도록 하였다. 또한, 20개의 소자 안테나로 구성되는 능동 배열을 급전부에 적용함으로써, 일차적으로 급전 배열에 의한 전자식 빔 조향 제어와 함께, 부 반사판의 경사각을 이용한 이차적인 빔 조향 제어가 가능하도록 하였다. 본 안테나는 이동체 내에서 위성을 통한 멀티미디어 서비스를 제공할 수 있도록 설계되었으며, 무궁화위성의 사양에 맞춰 송신은 Ka-대역(30.085$\sim$30.885 GHz)에서, 수신은 K-대역(20.355$\sim$21.155 GHz)에서 동작하도록 설계되었다. 또한, 제작된 시제품 안테나의 특성 시험을 통하여, 송신 및 수신 대역에서 최소 47 dBi와 44.4 dBi의 안테나 이득을 가지며, 급전 배열 및 부 반사판을 통하여 안테나의 빔이 ${\pm}2^{\circ}$ 범위까지 가변할 수 있음을 확인하였다.