• Tunnel and Underground Space
• /
• v.8 no.2
• /
• pp.146-156
• /
• 1998

Nemerical algorithms were developed to analyze the behavior of the double lining as well as ground mass separately or simultaneously. A lining interface element was especially developed, verified and applied to the study on the coupled interaction of shotcrete and the concrete lining. It could be known fro parameter studys on double lining support systems that as the contact surface between shotcrete and concrete lining was rougher, the more decreased bearing capacity against the cracking of the system. If the thickness of the shotcrete increased, the bearing capacity of the double lining also increased linearly with the thickness. If the thickness of the concrete lining increased, the bearing capacity of the double lining had the relationship of the characteristic S-shape of a sigmoid function with the thickness. When the thickness increased over a given value, it was not useful to increase more the thickness because bearing capacity had no remarkable change. It could be concluded that the behavior of the shotcrete and concrete lining was generally reversed before and after the ratio of horizontal to vertical earth preassure of 1.0 and 0.5 respectively. Therefore, we could guess that the movement which two shotcrete and concrete lining deflect toward each other around the crown caused a friction between two linings and thus this disadvantageous effect could contribute to reducing the bearing capacity against the cracking.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.261-274
• /
• 1998

The brief results of laboratory and field tests of yieldable steel arches are represented. The test supports were fabricated with three U-sectional beams which are 25.8 kg/m of Glocken profile. The structural analyses of semi-circular and arch supports were conducted to find out shape factor of U beam to be 1.35 and the location of 2nd plastic hinges. Load capacity of arch supports under crown loading were examined as a function of leg length. Yieldable characheristics of test supports were investigated with various bolting torque of connection part. Determination method of bolting torque were also studied. Finally, test supports were installed in-situ with torque of 21 kg .m, which showed a typical yielding procedure.

• Tunnel and Underground Space
• /
• v.18 no.4
• /
• pp.272-279
• /
• 2008

This paper describes the development of a simple and quantitative subsidence hazard estimation method appropriate to Korean coal mines using gangway depth information only. In spite of simpleness of estimation method, this new method gives good results close to those obtained using influence function method when applying to a virtual rectangular excavation model and to a closed mine where actual subsidence occurred. Therefore, this method can be effectively applied to the identification of zones liable to subsidence over closed coal mine in Korea where the shape of extraction is very complex and usually unknown.

• Earthquakes and Structures
• /
• v.13 no.1
• /
• pp.17-27
• /
• 2017

In this study, the characteristics of site amplification at seismic observation stations in Japan were estimated using the attenuation relationship of each station's response spectrum. Ground motion records observed after 32 earthquakes were employed to construct the attenuation relationship. The station correction factor at each KiK-net station was compared to the transfer functions between the base rock and the surface. For each station, the plot of the station correction factor versus the period was similar in shape to the graphs of the transfer function (amplitude ratio versus period). Therefore, the station correction factors are effective for evaluating site amplifications considering the period of ground shaking. In addition, the station correction factors were evaluated with respect to the average shear wave velocities using a geographic information system (GIS) dataset. Lastly, the site amplifications for specific periods were estimated throughout Japan.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.6
• /
• pp.97-109
• /
• 2008

This study first attempted to catch the transformational affairs and motives of the representative pavilion, Hanbyeok in Honam after its construction. Especially, it re-illuminated the morphologic, significant and functional change process of a pavilion after the early Joseon Dynasty by taking the local scenery, Hanbyeokdang as a sample, and considering the space and scenic characteristics, and diachronically understood its creation process and rebuilt its inherent positional meaning to reach the following conclusion. 1. Weoldanglu, at its early foundation, seems to have stressed the function of a private banquet and lecture hall to train younger students, and served as a reception space. Then the reception function gradually increased, and up to before 1530, it seems to have been called Weoldanglu(月塘樓) or Weoldangwon(月塘院). 2. In 1619, Governor Yoo Saek changed the pavilion name to Hanbyeokdang through the subject of a poem. 200 years after Weoldang's death, it became a public space called Hanbyeokdang, an amusement place in which scholars cultivated great morale, and participated in the sending-off and welcoming of predecessors and successors. This seems to have taken a foothold as a public event or entertainment space for the local administration, Jeonjuboo(全州府) through the remodeling process sponsored by the public. 3. Scenic language such as its indicating name, expression type and surrounding view through old map and so on, the shape of Hanbyeokdang evolved and changed to diverse types after the foundation of Weoldanglu, at the heart of which Hanbyeokdang with its two legs standing at a rock was located. 4. During the late 18th century, Hanbyeokdang seems to have been a wing corridor connected closely to the left corridor of the Jeonju stream bed, whose pattern is presumed to have existed even during the early 19308. Such changes in scenic language make us assume that diverse auxiliary space, a wing corridor, was erected for use as a public banquet and amusement spot of Jeonjuboo Castle, the inherent function of Hanbyeokdang after the mid 18th century. 5. Penetration of Hanbyeokgool and the erection of Hanbyeokgyo caused the change of the ancient shape of Hanbyeokdang. Specifically, a great Hanbyeokgyo passing by the pavilion changed the relative scale, so the pavilion image of pursuing unity with nature has lost the old inherent refinement and visual character.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.4
• /
• pp.327-351
• /
• 2009

Laboratory tests are performed in this paper to investigate the brittle failure characteristics of over-stressed rocks taken in deep depth. Also, numerical simulation performed using that the so-called CWFS(Cohesion Weakening Frictional Strengthening) model is known to predict brittle failure phenomenon reasonably well. The most typical rock types of Korean peninsula - granite and gneiss - were used for testing. Results of uniaxial compression tests showed that the crack initiation stress was about 41 % to 42% of the uniaxial compressive strength regardless of rock types, where as, the crack damage stress of granite was about 75%, and that of gneiss was about 97%. Through the damage-controlled test, strength parameters of each rock were obtained as a function of damage degree. After the peak, the crack damage stress and the maximum stress were decreased, The cohesion was decreased and the friction angle was increased with increase of rock damage. Before reaching the peak, the elastic modulus was slightly increased, while decreased after the peak. Poisson's ratio was increased as the damage of rock proceeds. Comparison of uniaxial compression tests and damage-controlled tests shows the crack initiation stress estimated from the damage-controlled test fluctuated within the range of crack initiation stress obtained from the uniaxial compression test; the crack damage stress was less than that estimated from the uniaxial compression test. In order to predict the critical depth that brittle failure occurs, numerical simulations using the CWFS model were performed for an example site. Material parameters obtained from the laboratory tests mentioned above were used for CWFS simulation. Comparison between the critical depth predicted from the numerical simulation using the CWFS model and that predicted by using the damage index proposed by Martin et al.(l999), showed that critical depth cannot be reasonably predicted by the currently used damage index except for circular tunnels. A modified damage index was proposed by the author which takes the shape of tunnels other than circular into account.

• Geomechanics and Engineering
• /
• v.24 no.6
• /
• pp.519-529
• /
• 2021

In coal mining activities, the abutment stress of the coal has to undergo cyclic loading and unloading, affecting the strength and seepage characteristics of coal; additionally, it can cause dynamic disasters, posing a major challenge for the safety of coal mine production. To improve the understanding of the dynamic disaster mechanism of gas outburst and rock burst coupling, triaxial devices are applied to axial pressure cyclic loading-unloading tests under different axial stress peaks and different pore pressures. The existing empirical formula is use to perform a non-linear regression fitting on the relationship between stress and permeability, and the damage rate of permeability is introduced to analyze the change in permeability. The results show that the permeability curve obtained had "memory", and the peak stress was lower than the conventional loading path. The permeability curve and the volume strain curve show a clear symmetrical relationship, being the former in the form of a negative power function. Owing to the influence of irreversible deformation, the permeability difference and the damage of permeability mainly occur in the initial stage of loading-unloading, and both decrease as the number of cycles of loading-unloading increase. At the end of the first cycle and the second cycle, the permeability decreased in the range of 5.777 - 8.421 % and 4.311-8.713 %, respectively. The permeability decreases with an increase in the axial stress peak, and the damage rate shows the opposite trend. Under the same conditions, the permeability of methane is always lower than that of helium, and it shows a V-shape change trend with increasing methane pressures, and the permeability of the specimen was 3 MPa > 1 MPa > 2 MPa.

• Journal of the Korean association of regional geographers
• /
• v.13 no.4
• /
• pp.422-437
• /
• 2007

Dokdo has historical and political meaning in relation to the territorial problems with Japan. The area can be the main factor to explain the formation and development process of East-Sea as exposure volcanic island at East-Sea with Ulreong-island. Accordingly, it also has an important meaning of physical geography aspects In this research, it is perceived the geomorphological development process of slope due to the salt weathering which is considered as the most important factor to understand whole geomorphology of Dokdo. And researched how a geomorphology of this sort affects to animal and plants. The peculiar geomorphology is tafoni which is a weathering geomorphology and one of the remarkable geomorphology in preservation of Dokdo. Tafoni at west part of Dongdo is distributed intensively near shoreline which is composed tuff. The shape of tafoni is mainly massive, circle and oval in Massive tuff breccia layer also is formed toward horizontality bedding direction in Bedded lapilli tuff. Tafoni in Dokdo is constituted after middle of Holocene. This fact can be proved by ranging at surface of sea-cliff which is formed wave erosion after middle of Holocene sea-level reaching to present level. Tafoni is also the most contribute factor of geomorphology dissection of Dokdo as it is eroded the bed rock with salt weathering. In bottom part of tafoni it has an important function for habitat of birds. Herbaceous plants are on it. To procrastinate of bed rock dissection by growth of Tafoni, conservation of vegetation and soil are most important factor.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.469-477
• /
• 2021

For successful restoration of maxillary anterior implants, both pink esthetics and white esthetics must be satisfied. For pink esthetic part, the role of appropriate provisional prosthesis restoration is important, and for white esthetic part, the color and shape of the definitive prosthesis is important. Multilayer zirconia can be used for natural tooth appearance due to the higher transparency of the incisal area compared to the conventional monolithic zirconia. Therefore, in this case, white esthetic part was achieved through multilayer zirconia after recovering function and esthetics through appropriate provisional prosthesis in a patient who lost the maxillary anterior teeth.

• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.226-241
• /
• 2020

The stability of underground mine cavity is closely related with pillar strength. The vulnerability of pillars can be judged and reinforced if the pillar strength is known. The pillar strength is affected by characteristics of discontinuities and shape of a pillar. The change of pillar strength due to a discontinuity passing through the center of a pillar, width-to-height ratio of a pillar and small joints existing within a pillar was analyzed using PFC 3D. The result showed that the pillar strength is influenced by dip angle of a discontinuity and it increases as width-to-height ratio of a pillar increases. The pillar strength decreases as the number of contained joints increases. The relationship between total trace length observable from the pillar surface and the pillar strength was regressed with exponential function. The correlation coefficient of the regression was high enough so that pillar strength can be predicted using total trace length if a joint set exists in a pillar. Lastly, the method to estimate the strength of a pillar that includes two joint sets was proposed if the joint dip angles are 60°, 30°. The method also need total trace lengths of two joint sets.