• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.142-146
• /
• 2010

This study presents the design of small size turbo-compressor to increase the performance using computational fluid analysis. A three dimensional computation was conducted changing the main parameters of impeller blade and diffuser shape, respectively, and the design was performed on a basis analysis of result of that. As a result, the Improved shapes show the increase of efficiency in comparison with the existing shape. This study will be used as useful reference data to establish the design concept of the small size turbo-compressor and to improve its performance.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.507-512
• /
• 2003

A finite element analysis for near-net-shape forming of Al6061 powder was performed under warm pressing. The advantages of warm compaction by rubber isostatic pressing were discussed to obtain parts with better density distributions. To simulate densification and deformed shape of a powder compact during warm pressing, the elastoplastic constitutive equation based on yield function of Shima-Oyane was implemented into a finite element program(ABAQUS). The hyperelastic constitutive equation based on the Ogden strain energy potential was employed to analyze nonlinear elastic response of rubber. Finite element results were compared with experimental data for Al6061 powder compacts under warm pressing.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1483-1486
• /
• 2003

Injection mold is a manufacturing process used to produce the various parts of complicated shape at a low cost. Many factors such as, section shape, resin and mold temperature, filling time, etc, affect on the quality of injection part during injection molding process. The precent study, was carried out the shrinkage analysis of shoes injection mold to optimize runner shape based on filling and packing pressure with MoldFlow. Taguchi design and analysis of variance are used to optimize injection mold design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.12
• /
• pp.1153-1160
• /
• 2008

In this paper, the algorithm of Abaqus UMAT is introduced to analyze the shape memory alloy. The SMA has two main effects which show non-linearity. Due to this, it is hard to analyze SMA using analysis tools and to describe all of two effects. Therefore, in this study, the program using Abaqus UMAT based on Modified Brinson model is used to analyze SMA. The martensite fraction, the most important factor which defines SMA motion, is also calculated by Fortran program in UMAT. In addition, the tensile test of SMA specimen is conducted. The availability of algorithm is proved by comparing analysis to experimental result.

• Transactions of Materials Processing
• /
• v.17 no.3
• /
• pp.210-217
• /
• 2008

The effects of blank shape on the safety of stamped parts are studied through the comparison of an optimal blank and the corresponding reference blank shape to show further advantage of the optimal blank. In order to carry out this study, stamping process has been analyzed and the forming history, e.g. accumulated effective strain and thickness has been incorporated in the crash analysis. The reference blank has been determined following to the actual industry guideline, and excessive material to the desired shape has been trimmed off before crash analysis for the objective comparison. Through the study, appreciable increase of impact safety has not been observed and the effective of blank shape is verified not to be significant.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.204-211
• /
• 2001

For the treatment of high compressibility number in the Reynolds equation, a new class of exponential high-order shape functions has been recently introduced in the literatures. In this paper a FE lubrication analysis method of high speed gas mechanical face seals is developed, implementing these shape functions. Their validity and usefulness are presented using 1-D gas bearing models. And a validation of developed 2-D analysis code is shown with a gas flat and spiral groove face seal models.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.6
• /
• pp.469-477
• /
• 2012

This paper describes the characteristic analysis of ice impact force for the Arctic structure shape. In the present study an energy method has been used to predict the impact force during the ice-structure collision. This study also employs two concepts for reference contact area and normalized stress in analysis procedure. The influences of factors, such as impact velocity, full penetration depth, structure shape and ice floe size, are investigated. Full penetration occurs, particularly at lower impact velocity when ice thickness increase. But "typical size" ice floe does not expected ever to achieve full penetration during the impact procedure. The structure shape is the dominant factor in ice impact force characteristic. The results for various ice-structure collision scenarios are analyzed.

• Current Optics and Photonics
• /
• v.4 no.5
• /
• pp.411-420
• /
• 2020

Non-contact three-dimensional (3D) measuring technology is used to identify defects in miniature products, such as optics, polymers, and semiconductors. Hence, this technology has garnered significant attention in computer vision research. In this paper, we focus on shape from focus (SFF), which is an optical passive method for 3D shape recovery. In existing SFF techniques using interpolation, all datasets of the focus volume are approximated using one model. However, these methods cannot demonstrate how a predefined model fits all image points of an object. Moreover, it is not reasonable to explain various shapes of datasets using one model. Furthermore, if noise is present in the dataset, an error will be generated. Therefore, we propose an algorithm based on polynomial regression analysis to address these disadvantages. Our experimental results indicate that the proposed method is more accurate than existing methods.

• Journal of Welding and Joining
• /
• v.26 no.4
• /
• pp.66-72
• /
• 2008

Because of high intensity and easy controllability of the heat source, high frequency induction heating has been concerned and studied for the steel forming process in the ship building industry. However, the heating and forming characteristics have to be further properly modelled and analyzed for the process to be utilized with its optimal working parameters. In this study, a modelling with thermo-elasto-plastic analysis is performed using the FEM to study heat flow and deformation of the steel plate during the forming process with the electro-magnetic induction heating. The numerical model is then used to study the effect of the inductor shape on the magnitude of angular deformation of the plate during the forming process. It is revealed that the square shape of inductor induces the largest deformation among the rectangular inductors.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.51-58
• /
• 2000

Dynamic relaxation method is a shape finding analysis method for flexible structures by introducing the dynamic equilibrium equation. However, it is difficult for shape finding to estimate the most appropriate values for the mass and damping on each shape because the values are random one. In this study, the unit mass, the unit damping and the principal direction stiffness are utilized to avoid the random values, and the Newmarks assumption is introduced during the dynamic analysis. By introducing variant time increment method presented, the convergence time is reduced, that is, it can be reduced the total times for analysis.