• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.29-42
• /
• 2017

The purpose of the present study is the presentation of the appropriate element and shape function in the solution of the neutron diffusion equation in two-dimensional (2D) geometries. To this end, the multigroup neutron diffusion equation is solved using the Galerkin finite element method in both rectangular and hexagonal reactor cores. The spatial discretization of the equation is performed using unstructured triangular and quadrilateral finite elements. Calculations are performed using both linear and quadratic approximations of shape function in the Galerkin finite element method, based on which results are compared. Using the power iteration method, the neutron flux distributions with the corresponding eigenvalue are obtained. The results are then validated against the valid results for IAEA-2D and BIBLIS-2D benchmark problems. To investigate the dependency of the results to the type and number of the elements, and shape function order, a sensitivity analysis of the calculations to the mentioned parameters is performed. It is shown that the triangular elements and second order of the shape function in each element give the best results in comparison to the other states.

• 한국의류학회지
• /
• 제26권7호
• /
• pp.1026-1035
• /
• 2002

The purposes of this study were to classify the front view of trunk of adult males into several kinds of shape and to provide the characteristics and silhouette of each group which has same shape. As the sample, subjects were l290 males of 20 to 54 year-old. The procedure and results were follows; l. The principal component analysis was used to obtain the shape factor of the front of the trunk 8 factors in the front which explained 86.8% of total variance were extracted. 2. As the result of the cluster analysis of factor scores, the font of body was classified in 4 types. 4 types were named X, A, Y and H type in the front considering the characteristics of each type.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.27-28
• /
• 2022

There is a limit to preventing various types of safety accidents in advance at construction sites. Even for buildings of the same total floor area, it is expected that the more complex the building shape or the higher the number of floors, the higher the probability of a safety accident. Therefore, it is necessary to analyze the effect of the shape of a building on safety accidents using safety accident data generated during actual construction. The purpose of this study is to analyze the impact of building shape on safety accidents. As a result, the R2 value of shape factor and safety accident was 0.901, and the R2 value of construction difficulty and safety accident was 0.944. In the future, the results of this study will be used as basic data for improving safety management related systems.

• 한국농공학회논문집
• /
• 제60권1호
• /
• pp.67-77
• /
• 2018

The objective of this study is to extract the shape of the slope from the images acquired using UAV and evaluate its suitability and reliability when applied to slope stability analysis. UAV is relatively inexpensive and simple, and it is possible to make terrain survey by generating point clouds. However, the image acquired from UAV can not be directly photographed by the forest canopy due to the influence of trees, resulting in severe distortion of the terrain. In this study, therefore, the effects of forest canopy were verified and the slope stability analysis was performed. Images acquired in winter and summer were used, because summer images are heavily influenced by the forest canopy and winter images are not. As a result of the study, the winter image is suitable for the extraction of slope shape, but severe terrain distortion occurs in the summer image. Therefore, slope stability analysis using slope shape extracted from summer image is impossible, so it should be modified for slope stability analysis. The modified slope did not completely eliminate the distortion of the terrain, but it could express the approximate shape of the slope. As a result of the slope stability analysis, the location and shape of the failure surface are the same, and the error of the safety factor is less than 0.2, which is close to the actual slope.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.291-294
• /
• 2005

In the present study, a numerical analysis was performed for interior connections of continuous flat plate to analyze the effect of column section shape on the behavioral characteristics of the connections. For the purpose, a computer program for nonlinear FE analysis was developed, and the validity was verified. Through the parametric study, the variations of shear stress distribution around the connection were investigated. According to the result of numerical analysis, the column section shape has a serious effect on the behavior of the connections. As the length of the cross section of column in the direction of lateral load increases, the effective area and the shear strength at the sides providing the torsional resistance decrease considerably. Therefore the strength model for the flat plate-column connections should be modified by considering the effect of column section shape on the behavior of the connections.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.611-616
• /
• 2011

본 논문은 산업 전반에 걸쳐 널리 사용되는 교반기에서 기계동력을 교반에너지로 바꾸어 주는 임펠러에 대해 연구이다. 기존 제품과 새로 제안한 두 가지 형상의 모델에 대한 구조해석 및 고유진동수, 진동 조화 해석을 수행함으로써 임펠러의 형상에 따라 국부적 응력 집중되는 취약부위에 대한 분석과 설계를 확인함으로써 임펠러의 형상에 따른 구조적 안정성을 평가하였다.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.107-114
• /
• 2021

Butterfly valves are used in various industries to control the flow rate, flow direction, pressure, and temperature. These are gaining popularity in the field of plant industry to enable high-differential pressure because of their low maintenance costs and ease of installation. This study presents a numerical analysis method to analyze changes in the flow characteristics of a high-differential pressure control butterfly valve based on the location and shape of the orifice. The numerical analysis was conducted using a commercial CFD program. The analysis results show a correlation between the orifice shape and cavitation phenomenon.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.16-22
• /
• 1996

Two kinds of blank shapes, optimum and square, are adopted to investigate formbility. Optimum blank shape is determined to construct an L-shape cup with uniform height and without flange part. For this purpose , rigid-plastic FEM analysis is applied with backward tracing technique. Maximum cup detph and strain distribution are measured experimetally for the products of the two kinds of blank shapes, which are optimum and square.It is confirmed that deeper cup without severe thickness reduction can be obtained fro the optimum shape.

• 한국운동역학회지
• /
• 제14권3호
• /
• pp.177-189
• /
• 2004

Kinematic and kinetic analysis using 3D Motion Capture system are common, yet there is little in the literature that discuss the relationship and coactivity between muscles during the golf swing. The purpose of this study was to describe the relationship between the employed 16 muscles during golf swing. We could observe 3 muscle patterns such as 'Line' shape, 'L' shape, and 'Loop' shape for the golf swing activity. The 'Line' shape indicates that two muscles act almost perfectly in phase, and the 'L' shape represents that two muscles act in a reciprocating manner(When one is active, the other is quiescent and vice versa). And the 'Loop' shape indicates that two muscles act sequently(After one is active, the other act). In these results, we knew the muscle patterns during golf swing is similar to the patterns during gait. And we presented it was possible to show the consistence of golf swing through the frequency analysis of muscle patterns. We believe that the results potentially useful for the golf players and coaches to analyze their performance.

• 복식문화연구
• /
• 제26권1호
• /
• pp.95-108
• /
• 2018

This study analyzed the body shape of the body of 17~19 years old female students using the SPSS 20.0 statistical program according to the 7th Korea Human Body Survey. Factor analysis was based on six factors including body size, body height, shoulder length, and width, upper body length, hip length, and shoulder inclination related factors. Through this cluster analysis, the body shape of late adolescent female student was classified into four types. Body type 1 was the highest body height factor, and the upper body length and the hip length factor were lower. It was analyzed as 'Long leg in the body'. Body type 2 is the 'narrow shoulder skinny type' with high hip and shoulder slope factors and low body size, body height, shoulder length, and width factor. Body type 3 showed body size, shoulder length, height and hip length factor, and body height factor was rather low 'low hip obese body shape'. Body type 4 was analyzed as 'lower shoulder long upper body type' with higher upper body length factor and lower body size and shoulder slope factor. It is thought that when the pattern is made, it is possible to produce excellent patterns by fitting the dimensions of the body, as well as the dimensions of the shoulder width, the slope, and the hip length.