• Journal of Sensor Science and Technology
• /
• v.10 no.1
• /
• pp.71-79
• /
• 2001

The use of a glass-plate probe of rectangular shape is proposed for the measurement of transmission loss in optical waveguides. The light-collecting window is of a thin, rectangular shape and is perpendicular to the light streak, while the conventional fiberglass probe has a small circular face. This transversely elongated form results in a grate improvement of mechanical tolerance for the probe movement in the vortical as well as in the transverse direction. A theoretical investigation also presents a reasonable agreement with the experiments.

• Fashion & Textile Research Journal
• /
• v.7 no.3
• /
• pp.301-308
• /
• 2005

The purpose of this study is to design men's clothing pattern that supplemented the problems of body shapes, by grasping the physical characteristics of middle-aged men and classifying their body shapes through comparing measurements after carrying out the human-body measurement targeting 120 middle-aged men at the age of 35-49 in full. As to the technical-statistic analysis of the measurement items, it could be seen that the middle-aged people who are the research target, have the obese body shapes. As a result of carrying out the factor analysis by the measurement analysis, it was derived the totally five factors such as thickness and width, stature and height, weight and girth, the bust length, and the shoulder shape. The total communality is 78.47%, and as a result of the cluster analysis by the factor score, it was classified into three clusters. Type 1 is the body shape with the great stature, the waist region a little obese, and the biggest thickness, width and girth. It is a flat body shape with the narrow shoulder and the smallest difference between the breast width and the waist width. As type 2 is the body shape that is small stature and is relatively not fat, it is the shape with the biggest difference between the breast width and the waist width and with the wide shoulder. Type 3 is the body shape that belongs to the middle of type 1 and type 2, has the upper-part body longer than other body shapes, and has the developed breast region with the biggest bosom width and bosom thickness.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1154-1162
• /
• 2020

In this study, the soft textile actuator is produced for a smart wearable with the shape memory effects from linear shape memory alloys of Nickel and Titanium using the driving force through the fabrication process. The measurement model was designed to measure dynamic characteristics. The heating method, and memory shape of the linear shape memory alloy were set to measure the operating temperature. A shape memory alloy at 40.13℃, was used to heat the alloy with a power supply for the selective operation and rapid reaction speed. The required amount of current was obtained by calculating the amount of heat and (considering the prevention of overheating) set to 1.3 A. The fabrication process produced a soft textile actuator using a stitching technique for linear shape memory alloys at 0.5 mm intervals in the general fabric. The dynamic characteristics of linear shape memory alloys and actuators were measured and compared. For manufactured soft textile actuators, up to 0.8 N, twice the force of the single linear shape memory alloy, 0.38 N, and the response time was measured at 50 s.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.5
• /
• pp.842-852
• /
• 1995

The purpose of this study was to provide fundamental data of characterizing for age group of obese women's body shape. The subjects were 132 obese women, age of 20~59. The criteria of obestity based on Vervaeck index ($\geq$92.3), Rohrer index ($\geq$ 1.6), and bust girth ($\geq$90 cm). Thirty eight measurement items were used for F-test. Forty two transformed variables (including 4 additional variables) were used for cluster analysis The results were as follows: 1. Characteristics for age group were described that 20's was narrow shoulder, flesh contoured shape in upper body. 30's was rounded upper back, 40's was the slightest fatty shape, and 50's was the fattest round shape among four age groups. 2. Four types of obese women's body shape were classified by cluster analysis. Body shape of type 1 was fatty abdomen, and rounded upper back in 50's mainly. Body shape of type 2 was slightly fatty. Body shape of type 3 was round shape. Body shape of type 4 was the smallest girth in the obese women in 40's mainly.

• Fashion & Textile Research Journal
• /
• v.10 no.3
• /
• pp.329-334
• /
• 2008

The purpose of this research is to develop the design, pattern and size system of brief as a measurement garment in order to obtain more precise silhouettes and sizes of the body in 3D measurements. The results of this research are as follows: First, nylon/lycra materials which elasticity is equivalent to 18%(wale) and 27%(course), were selected as a material for briefs to minimize possible error in measurement and deformation of body shape caused by looseness or tightness in its measured parts. And T-back style design was selected, of which briefs neither deform human body nor cause overlapping or excessive tightness when was put on the measurement garment over it. Second, different darts for men and women were adopted into the pattern in consideration for the shape of hip. Third, the waist band of briefs was located between the waistline and abdominal girth line so that it didn't interfere with measurement, and using a wide band of 40mm minimized the tightness of the human body. In addition, the stitch lines and sewing procedure were simplified to minimize the deformation of body shape resulting from inseams and stitch lines. Finally, for the size of briefs, 6 cm intervals were set on the basis of the waist girth and 8 kinds for men and 6 kinds for women were selected in descending order of appearance rate by the interval sections. English T meaning T-back design and numbers representing the waist girth were marked in parallel for the name of size.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.11
• /
• pp.1399-1409
• /
• 2005

The purpose of this study was to analyze the shape of gathered skirts using a three-dimensional measurement system. And in this experiment, I try to accumulate three-dimensional data of wearing model and to figure out analyzing method made by shape of clothes. The experimental design consists of two factorial designs. I set up three different kinds of fabrics, ratio of gathers. Therefore nine samples were made. The instrument and tools for three-dimensional measurement was whole body 3D scanner. Analysis program used in experiment is RapidForm 2004 PP1 and Pattern Design 2000. Data analysis utilizes SPSS WIN 10.0 Package. T-test to effect an inspection of evidence, there was difference about measurement times. One-way ANOVA to analysis effect of gather made by gathering conditions. The following results were obtained; 1. As a result of inspecting an error several times using a three-dimension measurement system, convinced data was obtained. 2. At front, distribution of gap amount was larger than back. And as ratio of gathers increased, distribution of gap amount showed regularly. 3. After analyzing horizontal sectional figure of skirts, as a height of skirt changed from waist to the bottom of skirts, the results showed as follows. While section width, section thickness, node width, node depth increased, node count decreased. 4. With the horizontal section levels of gather skirt, the silhouette on middle hip section was similar with the silhouette of body line. And as ratio of gathers around hip section increased, nodes showed regularly. At the bottom of skirts showed different nodes by different gathering condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1862-1870
• /
• 1997

A fast and precise technique to measure 3-dimensional coordinates of an object is proposed. It is essential to take the 3-dimensional measurements of the object in design and inspection. Using this developed system a surface model of a complex shape can be constructed. 3-dimensional world coordinates are projected onto a camera plane by the perspective transformation, which plays an important role in this measurement system. According to the shape of the object two measuring methods are proposed. One is rotation of an object and the other is translation of measuring unit. Measuring speed depending on image processing time is obtained as 200 points per second. Measurement resolution i sexperimented by two parameters among others; the angle between the laser beam plane and the camera, and the distance between the camera and the object. As a result of these experiments, it was found that measurement resolution ranges from 0.3mm to 1.0mm. This constructed surface model could be used in manufacturing tools such as rapid prototyping machine.

• The Research Journal of the Costume Culture
• /
• v.14 no.5
• /
• pp.840-849
• /
• 2006

Breast volume has been approximately estimated under the assumption that the shape of breast is a corn. However, women's breast is more like a bulged bag in reality. In this paper, three methods of breast volume estimation were compared to find out the more accurate method. The shape of the breast is assumed as a hemisphere in the first estimation method and a corn in the second one. In the third method, arc along the cross sectional shape of breast was utilized in the calculation. Comparisons among the methods were made using the actual 3D volume measurement of thirty seven women's breast. As results, the third method was the best one for the normal breast type, especially for the lower part of the breast ($R^2=0.74$) which is the crucial design parameter of the brassiere. Assumption of the shape of breast as a corn was reasonably acceptable when the breast is sagged. It was expected that when women wore brassiere, the accuracy of the third method would increase more, since the shape of breast becomes more symmetrical.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.3
• /
• pp.92-99
• /
• 1999

The inspection unit which is developed and used in this study, is processed the shape data from the CCD camera to seek welding bite section shape, and then calculated as a real dimension from measuring the value of each inspection item. The reason of measuring with the real in this study is came out from the image method which used for a long time, which is extricated the characteristic as the dimension of pixel by recognize pixel. The measurement method of the section shape is that we decide the thresholding value after we drew the histogram to binarizate the object. After that, we make flat the object to get rid of the noise and measure the shape of welded part through the boundarization of the object. The shape measurement is that measure the value of the welding part to adapt the actual operation program from using the ratio between the actual dimension of the standard specimen and the dimension of image, to measure the ratio between the actual product and the camera image. The inspection algorithm which estimates the quality of welded product is developed and also, the software GUI(Graphic User Interface) which processes the automatic test function of the inspection system is developed. We make the foundation of the inspection automatic system and we will help to apply other welding machine.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.46 no.4
• /
• pp.672-686
• /
• 2022

The study classifies and analyzes the lower-body-shape types of female adolescents aged 14 to 16 years to provide meaningful information for making ready-to-wear patterns that are suitable for various female adolescent body types. The body-size data of 830 females aged 14 to 16 years were analyzed from 6th Size Korea anthropometric study. A factor analysis of 27 measurement items related to the lower body extracted 3 factors: waist/upper legs, height of the lower body, and hip area. A cluster analysis classified the female adolescent lower-body types into four clusters: the skinny body type with the shortest lower-body length, the most obese body type with the largest girth, the normal body type with the longest hip length, and the slender body type with the longest lower-body length. The discriminant analysis determined that nine measurement items had the most influence on classifying lower-body-shape types, and discriminant functions were derived. These results are meaningful because they provide more precise information about lower-body-shape types.