• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1382-1385
• /
• 2007

In this paper, we study about the measuring algorithm that can implement Structural Health Monitoring (SHM) more efficiently by two measurement methods using smart sensor. Through the impedance measurement method, the damage condition of structures on wide area is monitored first, and then it changes the mode to guided wave measurement mode by mode switching algorithm when impedance measurement mode detects abnormal signals. Efficient handling of the real-time data would be available by analyzing location and shape of damage through guided wave measurement.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.3
• /
• pp.61-68
• /
• 2013

Automatic measurement system is required since cycle time and cost of production are increased by various factors in manual systems. This paper presents a machine vision based prototype measurement system for the automotive axisymmetric shape parts which are generally measured by a manual system that is required the tolerance of the part is very small on each machined surface. This measurement system adopts a method in which optical lens is transferred along the profile of the part to minimize measurement cycle time. The main interest of this paper is a development of an optimum measurement algorithm to the outside diameter of the parts that can be applied to various combinations of hardware. The operating system used to implement the whole system is Window XP and corresponding environment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.6
• /
• pp.938-948
• /
• 2009

The purpose of this study was to offer typical facial shapes Korean women in their 20's to 50's. We used facial photographs of 600 Korean women obtained from $2003\sim2004$ Size Korea Project and we measured these photographs indirectly in this study by utilizing the Venus face2D program. Total 62 measurements on the face were measured and analyzed by statistical methods. The results were as follows. First of all, the mean of face length was 196mm, top face length was 62.3mm, middle face length was 68.9mm, bottom face length was 66.5mm, mean of forehead width was 125.1mm. As based on those average sizes, we proposed a average facial size and shape of Korean women and a average facial size and shape of 20's, 30's, 40's and 50's in this study. When examined characteristic of 20's facial shape, it was recognized that the width of forehead was wider and the width of gnathion was smaller than other age groups. In the characteristic of 30's facial shape, the ratios of facial length, top of face, middle of face and bottom of face were balanced well, as comparing with other age groups. Overall, the values of facial measurement of 30's were similar to the averages of total women. In the facial shape of 40's, mean length and width of face each were the smallest among each age group. The eye shape of 40's was more drooped than the average eye shape and the protrusion of the zygomatic bone was significantly different. In case of the facial shape of 50's, it was similar to the facial shape of 40's, but mean lengths and widths of 50's face were slightly larger than the values of 40's. The eye shape of 50's was more drooped than average group and the eye length was the smallest among all age groups.

• Journal of Fashion Business
• /
• v.8 no.4
• /
• pp.94-103
• /
• 2004

The purpose of this study was to make activated electronic business transaction of clothes. The subject used for this study was 19 - 24 aged 149 college women who most likely buying products through internet. By compare the 149 women's body shape with 3D model, 149 women could be judged their body shape objectively. We showed the average 3D model by the measurement of 19 - 24aged women's body shape. 19 - 24aged women are big customer of internet shopping mall. By understanding of the difference between real somatotype and perceptual somatotype, we can reduce the disadvantage such as returning clothes. Also, imaginary fitting model can be used for internet shopping mall, animation work, fashion show, and advertisement work. Therefore, we can expect the worth of this study to do.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.97-104
• /
• 1999

Brake squeal noise has been a problem since the early days of motoring . It is important to obtain vibration mode shape for reduction of brake noise . Stroboscopic Electronic Speckle Pattern Interferometry is a very powerful measuring method for study of vibrating objects in static state compared with conventional methods because this method can give both resonance frequency and quantitative visualization of vibration mode shape at the same time. In this paper, we performed qualitative visualization and quantitative analysis of vibration mode shpae of disk brake by using stroboscopic ESPI and phase shifting method. The stroboscopic wavefronts are obtained by chopping continuous wave laser beam using acousto-optic modulator .Experiments were performed at the same constraint conditions as disk brake of the practical vehicle as far as possible. The experimental results of this paper show quantitative measurement of vibration mode shape and quantiative visualization of vibration amplitude of disk brake with 3D plotting.

• Journal of the Korean Home Economics Association
• /
• v.42 no.6
• /
• pp.103-110
• /
• 2004

Among accessaries, headwear is important to protect one's face and head from the sun, wind and cold. This study was performed to provide fundamental data on college female students' head shape by classifying their head shapes and by analyzing the characteristics of each head shape in order to improve the fitness of headwear. The subjects were 193 Korean college female students. The subjects were directly measured anthropometrically and indirectly analyzed photo-graphically. By direct and indirect measurement, 5 factors were extracted through factor analysis and those factors comprised 76.34% of the total variance. 3 clusters as their head shape were categorized using 5 factor scores by cluster analysis. Type 1 was characterized by long head type and having smallest head thickness and head girth. Type 2 had average size and the most round-head type. Type 3 was characterized by short head type and the largest head thickness and head girth.

• The Journal of the Korean dental association
• /
• v.11 no.11
• /
• pp.735-737
• /
• 1973

This study is to determine the exact position of tipping rotation center of root. The method of measurement is to record by means of dial gauge. The different shapes of root of lower second premolar are named as smooth type, tapered type, and curved type. The followings are the result ; 1. The tipping rotation center of the teeth varies with he shape of roots. 2. The rotation center of the root is placed apical one third portion upon roots in the smooth shape of roots, one half portion of roots in the taper shape of roots and below the apical one-third of root in curve shape.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.779-787
• /
• 2009

The purpose of this study was to classify the head shape for the apparel industry and to suggest standard head model for korean women. The 23 measurement items of 891 females, aged more than 18 years were used to analysis by statistical methods. Factor analysis, cluster analysis and duncan test were performed using these data. Through factor analysis, 5 factors were extracted upon factor scores and those factors comprised 68.76% for the total variances. 5 clusters as their head and face shape were categorized. We decided for the type 3 to standard head shape. 24 participants were measured using computed tomography(CT). The measured data of skin and skeleton and the standard head shapes were illustrated.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.124-131
• /
• 2008

There are many factors which affect the acoustical properties of a micro-speaker. Among the factors, the shape of the diaphragm is considered in this study. As an investigating method, the finite element methods and measurement techniques applied to study the acoustical properties according to diaphragm shape. In order to vary the stiffness of the diaphragm, the some patterns of comb teeth, such as the angle and the number of comb teeth, are applied to diaphragm. We can confirm that the change of the stiffness by the changing diaphragm shape affects the vibration and sound properties of the speaker. As a result, the reduction of the angle of the comb teeth increases the diaphragm stiffness and shifts the resonance frequency to a higher frequency range. The number of the comb teeth is related to the stiffness of the edge part.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.274-280
• /
• 2002

This paper addresses the vibration mode shape measurement technique utilizing a Continuous Scanning Laser Doppler Vibrometer (CSLDV). The continuous scanning capability is added to the conventional discrete Laser Doppler Vibrometer by reflecting the laser beams on the surface of the object using two oscillating mirrors. The bow scanning resulted from the proposed scanning method is eliminated by feedback control. The velocity output signal from the CSLDV is modulated to give the spatial velocity distribution in terms of coefficients which are obtained from the Fast Fourier Transformation of the time dependent velocity signal. Using the Chebyshev series form, the analysis of the vibration mode shape techniques for straight Bine scanning and 2 dimensional scanning are presented and discussed. The performance of the proposed SLDV is presented using the experimental results of the vibration mode shape of a plate