• Journal of the Korean Society of Costume
• /
• v.55 no.3 s.93
• /
• pp.69-80
• /
• 2005

The anatomical structure of the head and face are influenced by environmental factors. Therefore in this study we had undertaken to determine normal values of the head and face by 3D measurement in the 384 normal Korean male adults to find out craniofacial characteristics of Korean male adults by the age group. From the basic statistical data analysis, vertex-tragion and the length between the pupils were the longest in their twenties and grew shorter in elderly groups. According to the analysis of the craniofacial proportion, the head type of Korean male adults was short-headed. The statistically noticeable differences were found in the measurement of the left and the right sides of face in the age groups of 20, 30, 40, and 50. The results of the factor analysis of the age group showed two groups which were classified to 20, 40, 50 ages and 30, 60 ages. The order of factor analysis was as follows; the perpendicular length, the horizontal length, and the width (from highest).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.8
• /
• pp.74-81
• /
• 2019

Cars are inspected in the transport sector for their ability to achieve the greenhouse gas reduction targets. A vehicle (automobile) inspection broadly consists of regular and total checks, and both the safety level and the amount of exhaust gas are checked simultaneously during a vehicle inspection. This study deals with the efficiency of a soot probe to measure soot emissions from diesel vehicles. When the vehicle exhaust gas measurement is performed, there may be a difference between the exhaust gas temperature and the soot suction amount because of the different shape and angle of the exhaust port for each vehicle type. This may result in some incidents where the correct inspection nonconforming vehicle is not selected. Therefore, in this study, the shape of the probe was improved to increase the soot measurement efficiency under the condition of the exhaust pipe angle change.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.113-121
• /
• 2014

This paper presents a optimization design of 10[W] single phase BLDC motor applied Notch shape. Cogging Torque causes noise, vibration and torque ripple so notched stator is proposed in this paper. Firstly, a single phase BLDC motor needs applying aymmetric air-gap shape because this type motor cannot help having dead-point which is zero torque position. However, using asymmetric air-gap structure causes cogging torque increase. Therefore, this paper proposes the notch shape structure. Notch shape structure has some advantages; low cost, easy to apply. There are 4 optimal factors selected in optimization process, which are position and size of notches. Through building a prototype, the result of FE analysis and the experimental measurement value are compared each other and then vailidity and utility of simulation will be verified.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.354-363
• /
• 2010

The purpose of this study was to provide some preliminary results on application of 3D scan data of head shapes to the hat design and pattern-making. This paper defined necessary measurement items and concepts in 3-dimensional images of head shapes. And also it presented the methodology to pattern-making of 6-piece crown hat based on 3D data. It used the data of Size Korea to pick up and choose a head shape model with the average head size of Korean women in their twenties. Main results were: 1. The 3D scan data of head shape was better than the 1 dimensional measurement data. Because I could establish a hat pattern-making theory by the 3D scan data of head. 2. The 3D scan data provided the basis for conceptualization of basic measurement points and items for a better fit of hats as well as the definition of the basic hat circumference. 3. This presented a methodology for analyzing out head shape by 3D scan data, and allowed the derivation of the basic hat circumference from the maximum head circumference. 4. As the 6-piece Crown cloche hat made by this method fitted the head shape model perfectly, this methodology could suggest potential applicability to various hat design.

• Journal of Sasang Constitutional Medicine
• /
• v.13 no.1
• /
• pp.24-34
• /
• 2001

Objectives : The purpose of this study was to evaluate the body shape of Sasang Constitutions by body composition and body measurement. Methods : This study was carried out 98 cases(68 males and 30 females)of Oriental Medical College at Kyunghee University. After determining the Sasang Constitutions(Soeumin, Soyangin, Taeumin) by QSCCII, the body shape of each group were analysed by body composition(INBODY 2.0, Biospace, seoul, korea) and body measurement. Results : 1) The result of Sasang Constitution analysis of 98 cases were classified as Soumin(52%), Soyang(24.5%), Taeumin(23.5%). 2) In the body composition and body measurement, there were significant difference from intercellular fluid, protein, mineral mass, weight, percent body fat, body water of left arm and BMI between Taeumin, Soyangin and Soumin. 3) In the body composition of male, Taeumin group showed that the arms were more developed than the legs and the upper trunk were more developed than the lower trunk. Soumin group showed the asymmetry of the right and left limbs. Soyang group showed the asymmetry of the right and left arms. In the body composition of female, Taeumin group showed the asymmetry of the right and left upper limbs. Conclusion : There are significant relationships between Sasang Constitutions, Body composition and BMI. The findings indicated here Body composition could be useful mean to make a diagnosis of the body shape, body type, physical constitution of Sasang constitutions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.294-299
• /
• 2012

This paper suggests a modeling technique for shape and volume prediction of fishes to cut them with identical weights for group meals. The measurement and prediction of frozen fishes for group meals are very difficult because they have a bending deformation occurring at frozen stage and a hollow by eliminating the internals. Besides there exist twinkles problem of surface caused by freeze and variable weights by moisture conditions. Therefore a complex estimation algorithm is necessary to predict the shape and volume prediction of fishes exactly. Hollow prediction, pattern classification and modeling for tails using neural network, integration based volume prediction algorithm are suggested and combined to solve those problems. In order to validate the proposed method, the experiments of 3-dimensional measurement, volume prediction and fish cutting for spanish mackerel, saury, and mackerel are executed. The cutting experiments for real fish are executed.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.11
• /
• pp.748-754
• /
• 1999

Micromirrors supported by S-shape girders were fabricated and their angular deflections were measured using a laser-based system. A micromirror consists of a $50\mum\times50\mum$ aluminum plate, posts and an S-shape girder. Two electrodes were deposited on two corners of the substrate beneath the mirror plate. $50\times50$micromirror array were fabricated using the Al-MEMS process. The electrostatic force caused by the voltage difference between the mirror plate and one of the electrodes causes the mirror plate to tilt until the girder touches the substrate. Bial voltage of the mirror plate is between 25~35V and signal pulse voltage on both electrodes is $\pm5V$. A laser-based system capable of real-time two-dimensional angular deflection measurement of the micromirror was developed. The operation of the system is based on measuring the displacement of a HeNe laser beam reflecting off the micromirror. The resonant frequency of the micromirror is 50kHz when the girder touches the substrate and it is 25 when the micromirror goes back to flat position, since the moving mass is about twice of the former case. The measurement results also revealed that the micromirror slants to the other direction even after the girder touches the substrate.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.81-86
• /
• 2008

I present a 3-D profiler specially devised for the profile measurement of specular surfaces that requires precision shape accuracy up to a few nanometer. A profile is reconstructed from the curvature of a test part of the surface at several locations along a line. The local curvature data are acquired with White-light Scanning Interferometry. Test measurement proves that the proposed profiler is well suited for the specular surface inspection like precision mirror.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.191-194
• /
• 2004

This study Is an measurement and prediction of transmission loss through dash panel with multi-path in a vehicle. Measurement results of transmission loss are decided by sound power measured using the sound intensity method under locating a sound source in the anechoic room and reverberant room, respectively. Prediction one is decided by multi-path analysis of dash panel composed by a various part of materials and complicated shape. Finally, two results show a great agreement between measured and predicted transmission loss.

• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.296-301
• /
• 1998

Pentagraphs are used to supply electric power to train via trolley lines. The higher train speed is, the higher voltage and current levels 8u. Since electric power is supplied with slinding contact, localized abrasion is inevitable. It is difficult and dangerous to measure their shape manually. Measurement system of pentagraph slider with ultrasonic processing has been reported. In this paper, measurement system with image processing is proposed. The system consists of CCD cameras, image grabber board, and PC operated on Windows'95. Image processing algorithms are presented and some results are illustrated.