• 대한의용생체공학회:의공학회지
• /
• 제31권2호
• /
• pp.134-140
• /
• 2010

Readily available high resolution brain MRI scans allow detailed visualization of the brain structures. Researchers have focused on developing methods to quantify shape differences specific to diseased scans. We have developed a novel method to quantify shape information for a specific population based on Multidimensional scaling(MDS). MDS is a well known tool in statistics and here we apply this classical tool to quantify shape change. Distance measures are required in MDS which are computed from pair-wise image registrations of the training set. Registration step establishes spatial correspondence among scans so that they can be compared in the same spatial framework. One benefit of our method is that it is quite robust to errors in registrations. Applying our method to 13 brain MRI showed clear separation between normal and diseased (Cushing's syndrome). Intentionally perturbing the image registration results did not significantly affect the separability of two clusters. We have developed a novel method to quantify shape based on MDS, which is robust to image mis-registration.

• 한국멀티미디어학회논문지
• /
• 제20권9호
• /
• pp.1584-1595
• /
• 2017

Each cultural community has developed a variety of fonts to express their own language and characters. Hangul has also diversified its font shapes through changing the composition ratio and look of the consonants and vowels. Rather, thanks to the variety of these fonts, a considerable amount of time and effort must be devoted to the selection of a specific font shape. This is related to the fact that the current Hangul service and classification system process the font only with its name or the name of the manufacturer. It means that there is no consensus about the font shape classification system for Hangul. In this study, we propose a shape property set that can be a basis for classifying Hangul fonts. The font shape property set was generated by performing statistical analysis with features which have been studied by the font design experts and was verified through questionnaire using representative fonts based on the classification scheme defined by the Hangul font design classification system standard. This study is meaningful in that it is a study on shape classification properties of K-means and PCA statistical techniques based on font data rather than design field study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.439-440
• /
• 2006

This research proposes a novel method of shape display to present 3-dimensional objects. Shape displays allow us to feel the actual volume of the object, unlike conventional 2D visual displays of 3D objects. The proposed method employs a wire frame structure to present 3D objects. The wire frame is composed of small units driven by shape memory alloy(SMA) actuators. The drive unit is analogous to the agonist-antagonist system of animal musculoskeletal systems, where the SMA actuators serve as agonist and antagonist muscles. The force in the SMA actuator is controlled by electrical current. The drive unit is equipped with the locking mechanism so that it can sustain the external force exerted by the user as well as the own weight of the wire frame structure. By controlling the current into the SMA actuator and locking mechanism, we call control the angle of the drive unit. A chain of drive units enables presentation of 2 dimensional objects. 3 dimensional presentations are possible by collecting the chains of drive units.

• Computers and Concrete
• /
• 제19권2호
• /
• pp.211-216
• /
• 2017

Crack on concrete surface allows more rapid penetration of chlorides. Crack width and depth are dominant parameters for chloride behavior, however their effects on chloride penetration are difficult to quantify. In the present work, the previous anisotropic (1-D) model on chloride diffusion in concrete with single crack is improved considering crack shape and roughness. In the previous model, parallel-piped shape was adopted for crack shape in steady-state condition. The previous model with single crack is improved considering wedge shape of crack profile and roughness. For verifying the proposed model, concrete samples for nuclear power plant are prepared and various crack widths are induced 0.0 to 1.2 mm. The chloride diffusion coefficients in steady-state condition are evaluated and compared with simulation results. The proposed model which can handle crack shape and roughness factor is evaluated to decrease chloride diffusion and can provide more reasonable results due to reduced area of crack profile. The roughness effect on diffusion is evaluated to be 10-20% of reduction in chloride diffusion.

• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.512-518
• /
• 2014

In this paper, the influence of part shape complexity and die type on forming accuracy in incremental sheet metal forming is presented. The part shape complexities are classified into two types, namely, of one and two-step shapes. Correspondingly, die types are classified into three types, namely, of no-, partial, and full die types. The experimental tests are performed separately on negative and positive forming methods. It is shown that for the one-step shape, there are no significant differences in forming errors between the cases of no- and full die types when the negative forming method is used. Furthermore, the full die type is better than the partial die when positive forming is used. For the two-step shape case, the full die type always exhibits better forming accuracy than the no- and partial die types, irrespective of the forming method used.

• 한국전산구조공학회논문집
• /
• 제23권6호
• /
• pp.615-626
• /
• 2010

The discrete-layer model is proposed to analyze the edge-effect problem of laminates under extension and flexure. Based on three-dimensional elasticity theory, the displacement fields of each layer in a laminate have been treated discretely in terms of three displacement components across the thickness. The displacement fields at bottom and top surfaces within a layer are approximated by two-dimensional shape functions. Then two surfaces are connected by one-dimensional high order shape functions. Thus the p-convergent refinement on approximated one- and two-dimensional shape functions can be implemented independently of each other. The quality of present model is mostly determined by polynomial degrees of shape functions for given displacement fields. For nodal modes with physical meaning, the linear Lagrangian polynomials are considered. Additional modes without physical meaning, which are created by increasing nodeless degrees of shape functions, are derived from integrals of Legendre polynomials which have an orthogonality property. Also, it is assumed that mapping functions are linear in the light of shape of laminated plates. The results obtained by this proposed model are compared with those available in literatures. Especially, three-dimensional out-of-plane stresses in the interior and near the free edges are evaluated and convergence performance of the present model is established with the stress results.

• 한국CDE학회논문집
• /
• 제7권2호
• /
• pp.131-139
• /
• 2002

Custom-tailored products always vary their sizes and shapes to satisfy the customers' tastes and requirements but they have to be fabricated as fast as possible when ordered. One way to solve this problem is to prepare several representative products in advance and each custom-tailored product is generated by machining the closest representative product. To realize this approach, it would be necessary to be able to group the products into several groups each of which has a representative product. Once the similar products are identified to be grouped, the representative shape can be generated such that all the products in the group can be made by machining the representative product. The custom-tailored products considered in this work have similar shapes but different sizes. Since these products have free surfaces, that are hard to be compared, their convex hulls are used for the grouping. Among all the products to be grouped, one product is chosen as a base shape. The shape and overall similarity values between the base shape and the remaining shapes are calculated as their convex hulls are rotated virtually. By calculating these similarity values at each rotation, the optimal alignment of the reference shape with respect to the base shape is determined. Overall similarity value at this optimal alignment is used as a measure for grouping. A prototype system based on the proposed methodology has been implemented and used to group the shoe-lasts for custom-tailored shoes.

• International Journal of CAD/CAM
• /
• 제11권1호
• /
• pp.18-26
• /
• 2011

This paper proposes a new solid-shape modeling system based on a lusterware-image illustration. The proposed method reconstructs a three dimensional solid shape from a set of rough sketches that are typically drawn in the early stages of the design process. The sketches do not have to be strictly accurate, and this tolerance to the roughness of the input sketches is one of the major advantages of the proposed method. The proposed system creates an initial shape based on the silhouette of the input lusterware-images. Then the user can edit the initial shape with intuitive cutting and dishing-up operations, which are based on sketching user interface. To achieve the goal, the system retains the geometric model with two representations: a point-set data and a volume data. This dual data structure allows the program to create an initial shape from the input images with little computational cost, and the user can apply cutting and dishing-up operations without substantially increasing computational and memory requirements. In this research, we have tested the proposed system by reconstructing solid models of some mechanical parts from rough sketches. The experimental results indicate that the proposed method is useful for the prototyping of a solid shape.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.692-699
• /
• 2017

The determination of the shape and rising velocity of gas bubbles in a liquid pool is of great importance in analyzing the radioactive aerosol emissions from nuclear power plant accidents in terms of the fission product release rate and the pool scrubbing efficiency of radioactive aerosols. This article suggests a simple parameterization for the gas bubble rising velocity as a function of the volume-equivalent bubble diameter; this parameterization does not require prior knowledge of bubble shape. This is more convenient than previously suggested parameterizations because it is given as a single explicit formula. It is also shown that a bubble shape diagram, which is very similar to the Grace's diagram, can be easily generated using the parameterization suggested in this article. Furthermore, the boundaries among the three bubble shape regimes in the $E_o-R_e$ plane and the condition for the bypass of the spheroidal regime can be delineated directly from the parameterization formula. Therefore, the parameterization suggested in this article appears to be useful not only in easily determining the bubble rising velocity (e.g., in postulated severe accident analysis codes) but also in understanding the trend of bubble shape change due to bubble growth.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제8권1호
• /
• pp.116-125
• /
• 2002

본 논문에서는 클립아트 이미지에서 모양 정보를 추출하고 이 정보를 이용하여 클립아트 이미지의 유사도를 측정하는 방법을 제안하였다. 본 논문에서 사용하는 클립아트 이미지는 자연영상에 비해 외곽선을 명확하게 추출할 수 있다는 장점이 있다. 이미지에서 모양 정보를 추출하는 이전의 방법은 모양의 외곽선을 이용하는 것과 영역을 이용하는 것으로 분류할 수 있는데 본 논문에서는 모양의 외곽선을 이용하는 것으로 외곽선의 오목한 부분과 볼록한 부분을 직사각형의 비율로 표현하는 방식을 제안하였다. 이렇게 함으로서 기존의 외곽선 기반 특징을 이용하는 방식보다 모양 정보를 더욱 잘 표현할 수 있었다.