• Structural Engineering and Mechanics
• /
• v.22 no.4
• /
• pp.419-432
• /
• 2006

Experimental studies on the behaviors of box-shape steel reinforced concrete (SRC) composite beams were conducted. Seven 1:3 scale model composite beams were tested to failure. Each of the beams was simply supported at the ends and two concentrated loads were applied at the one-third span and two-thirds span respectively. Experimental results indicate that the flexural strength can be enhanced when the ratio of flexural reinforcements and flange thickness of the shape steel are increased; the shear strength is enhanced with increase of web thickness of the shape steel. Insignificant effects of concrete in the box-shape steel are found on improving the flexural strength and shear strength of the box-shape SRC composite beams, thus concrete inside the box-shape steel can be saved, and the weight of the SRC beams can be decreased. Shear studs can strengthen the connection and co-work effects between the shape steel and the concrete and enhance the shear strength, but stud design for the composite beams should be further improved. Formulas for flexural and shear strength of the composite beams are proposed, and the calculated results are in good agreement with the experimental results. In general, the box-shape SRC composite beam is a kind of ductile member, and suitable for extensive engineering application.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.11a
• /
• pp.82-83
• /
• 2003

• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.328-343
• /
• 2003

Orthogonal pulse-shape modulation using Hermite pulses for ultra-wideband communications is reviewed. Closedform expressions of cross-correlations among Hermite pulses and their corresponding transmit and receive waveforms are provided. These show that the pulses lose orthogonality at the receiver in the presence of differentiating antennas. Using these expressions, an algebraic model is established based on the projections of distorted receive waveforms onto the orthonormal basis given by the set of normalized orthogonal Hermite pulses. Using this new matrix model, a number of pulse-shape modulation schemes are analyzed and a novel orthogonal design is proposed. In the proposed orthogonal design, transmit waveforms are constructed as combinations of elementary Hermites with weighting coefficients derived by employing the Gram-Schmidt (QR) factorization of the differentiating distortion model’s matrix. The design ensures orthogonality of the vectors at the output of the receiver bank of correlators, without requiring compensation for the distortion introduced by the antennas. In addition, a new set of elementary Hermite Pulses is proposed which further enhances the performance of the new design while enabling a simplified hardware implementation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2003

The optimal design for the shape of MIL-S-46119 ring obturator under the high pressure using parameter stud:』 on the stress analysis considering effects of design variable is presented, and it is compared to experimental results. The trends of parametric study are in good agreement with the experimental results. The more thickness the higher stress. The more taper the higher stress. And maximum stress of circumferential surface is larger than maximum stress of forward surface. The design variable!; are such as thickness, taper, radius of shape of the obturator. In order to optimize the shape of obturation ring, the weight is maximized subject to maximum stress of the obturator within allowable stress. The design constraints are geometric elements of design variables.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.670-674
• /
• 1996

In automated search of a design database to support mechanical design, it is necessaryto recognize a shape pattern which represents a design object. This paper introduces the concept of a surface relation graph (SRG) for recognizing shape patterns from a 3D boundary representation scheme of a solid model(a B-rep model). In SRG, the nodes and arcs correspond to the faces and edges shared by two adjacent faces, respectively. An attribute assigned to an arc is given by an integer which discriminates the relationship between two adjacent faces. The + sign of the integer represents the geometric convexity of the solid, and the -sign the concivity at the shared edge. The input shape is recognized by comparison with the predefined features which are subgraphs of the SRG. A hierarchyof the database for upporting the design is presented. A search for the design database is also discussed. The usefulness of this method is illustrated by some application results.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.315-320
• /
• 2000

The optimal design for the shape of metal ring obturator under the high pressure using parameter study on the stress analysis considering effects of design variable is presented and is compared to experimental results. The design variables are such as thickness, taper, radius of shape of the obturation ring. For optimization of the obturation ring, the weight is maximized subject to maximum stress of the obturator within allowable stress. The design constraints are geometric elements of design variables. The trends of parametric study are in good agreement with the experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.916-919
• /
• 2002

Cam mechanism is one of the common devices used in lots of automatic machinery. This paper introduces to an inverse cam mechanism. The inverse cam mechanism has a reverse structure as compared with common cam mechanism. For shape design of the inverse cam the approach used in this paper is an instant velocity center method that find the contact point between cam and roller at any contact time. And a computer program is developed for shape design and simulation by visual $C^{++}$ language. As the results, this paper presents two examples for the shape design of the inverse cam mechanism in order to prove the accuracy of the design procedures.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.11
• /
• pp.140-148
• /
• 2004

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based supporting for this integration if desirable. For this integration and process planning in the early design stage, the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function of product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.2
• /
• pp.13-26
• /
• 2011

The purpose of this study is to analyze the preference of design and body shape for korean baby-boom generation women. For this study, in-depth interviews were carried out to 11 women who were born in 1955~1963. They are called korean baby-boom generation. The results were as follows; 1) Korean baby-boom generation women care to their body shape, and they make much of the balance of body, not just looking slim. 2) Korean baby-boom generation women become more interested in their clothing, and they want to look with casual image than elegant image before. But overweight women preferred elegant image. 3) Korean baby-boom generation women prefer mix-match style for everyday clothes, but they prefer suit-set for formal wear. 4) When Korean baby-boom generation women choose of jacket or coat color, they consider more of their body-shape than season color. 5) Korean baby-boom generation women prefer plain style and jacquard with metal yarn. 6) Korean baby-boom generation women prefer out-door cloth fabric, at special time, they choose pure wool and pure silk. At ordinary time, they like more comfortable fabric like cotton mixed spandex or wool mixed spandex blends.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.114-117
• /
• 2004

The isothermal forging design of a Ti-6Al-4V wing shape was performed by 3D FE simulation. The design focuses on near-net shape forming by the single stage. The process variables such as the die design, pre-form shape and size, ram speed and forging temperature were investigated. The minimization of forging load and uniform strain distribution in a given forging condition were considered as main design factors. The FE simulation results fur the final process design were compared with the isothermal forging tests. Finally, the modified process design for producing the uniform Ti-6Al-4V wing product without forming defects was suggested.