• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.13-24
• /
• 2019

Adolescence is a transitional stage of physical development which occurs during the period from puberty to adulthood. Going through this period, various parts of an adolescent's body grow at different rates, leading to different body shapes and proportions when compared to adults. Therefore, this study aimed to investigate the body sizes and shapes of junior high school boys from ages 13-15 based on body measurement items that are used as the basis for school uniform designs including jackets, shirts, and pants. For this, the study sought the basic data needed to develop body shapes and school uniform patterns for junior high school boys using the data from the 6th Size Korea Survey (2010). Specifically, it provided basic data for the development of school uniform patterns that fit well through the classification of bodies into particular types. After extracting body shape componen a cluster analysis using ANOVA was performed. According to the factor analysis conducted to determine body shape components, 5 factors were obtained as follows: Factor 1: bulk and horizontal size, Factor 2: body height and length, Factor 3: shoulder shape and length, Factor 4: characteristics of horizontal size, Factor 5: shape of the upper body with a variance of 82.62%. To classify junior high school boys' body shape was determined using various characteristics, and a cluster analysis was performed with the variables obtained by the factor analysis. For this, body shapes were classified into 3 different types: Type 1 accounted for 33.4%, with a total of 463 subjects. This type was a tall, long body individual with the smallest bulk and size. Type 2 accounted for 22.7%, with a total of 315 subjects. This type was large in bulk and horizontal size, but the lowest in height and length. Type 3 accounted for 43.9%, with a total of 610 subjects. This type was close to average in terms of horizontal size, length, and height. To develop well-fitting school uniforms for junior high school students, there should be further studies on changes in body shape and their associated causes. The study results will be available as basic data for comparing branded school uniform patterns for junior high school boys and developing school uniform patterns based on body shape, using 3D virtual clothing simulations.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.293-300
• /
• 2023

The Shape Preferred Orientation (SPO) method has been used to analyze the orientation of fault motion, which is utilized as basic data for fault kinematics studies. The rigid grains, which as quartz, feldspar, and rock fragments, in the fault gouge are arranged in the P-shear direction through rigid body rotation by a given shear stress. Using this characteristic, the fault motion can be estimated from the SPO inversely. Recently, a method for securing precision and reliability by measuring 3D-SPO using X-ray CT images and examining the shape of a large number of particles in a short time has been developed. As a result, the SPO method analyzes the orientation of thousands to tens of thousands of particles at high speed, suggests the direction of fault motion, and provides easy accessibility and reliable data. In addition, the shape information and orientation distribution data of particles, which are by-products obtained in the SPO analysis process, are expected to be used as basic data for conducting various studies such as the local deformation of fault rocks and the fault generation mechanism.

• Research in Community and Public Health Nursing
• /
• v.13 no.1
• /
• pp.115-123
• /
• 2002

Purpose: The purpose of this study was to identify the obesity index, body shape satisfaction and body shape esteem according to weight perception in elementary school students. Method: The data were collected by using a questionnaire and physical examination records. The subjects were comprised of 669 children, all 12-years old, obtained from five (5) different elementary schools located in Jechoen. Data were analyzed with frequency, percentages, Chi-square test, ANOVA using the SPSS program. Results: 12.5% of male students, 11.1% of female students perceived themselves obese. There were significant differences in obesity index according to weight perception in male students ($x^2$=140.47, p= .000), in female students ($x^2$=130.99, p= .000). The percentages corresponding to normal body weight were highest with students who thought themselves thin in male students and self-perceived normal in female students. But in female students, 23.3% of self-perceived thin students, 37.8% of students who thought themselves obese corresponded to normal body weight actually. There were significant differences in body shape satisfaction according to weight perception in male students($x^2$=140.47, p= .000), and in female students($x^2$=130.99, p= .000). The percentages of body shape satisfaction were highest with students who thought themselves normal in male students while and in female students, the students who thought themselves thin were highest. There were significant differences in body shape esteem according to weight perception for male students (F=17.67, p= .000), and in female students (F=13.95, p= .000). The mean scores of body shape esteem were highest with students who thought themselves normal in male students and thin in female students. The students who thought themselves obese were lowest. There were significant differences in weight perception according to father's body shape ($x^2$=13.72, p= .008) in male students and father's educational level ($x^2$=14.90, p= .021), mother's educational level ($x^2$=17.73, p= .007), mother's body shape ($x^2$=13.07, p= .011) in female students.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.4
• /
• pp.137-144
• /
• 2019

The purpose of this study was to provide basic data for the development of a prototype of a garment that allows middle aged men to look idealized by examining the type of perception of middle aged men based on their subjective evaluation and their characteristics. This study used the Q methodology, which is a subjective research method that finds correlations among middle aged men across subjective attributes. The types of perception of body shape of middle aged men were analyzed as three types: leaning forward shape with bird legs, developed upper body shape with thick legs, protruding abdomen obesity body shape. The leaning forward shape with bird legs was recognized as the lowest in the BMI index, and the shoulder and chest were sagging, legs were thinner than the body and leaned forward. And that the hip were protruding and had a flat rectangular shape. Developed upper body shape with thick legs was the second overweight type of BMI index. It was recognized that the ankle and calf thighs were thick and the upper abdomen protruded upper body development body. Protruding abdomen obesity body shape was the most obese type with BMI index. In this type, the height was the smallest, and the upper abdomen came out and the abdomen protruded, and the abdomen was more exuded than the chest, and the neck was thick and the hips were recognized as the big body. The middle aged men's recognitive body shape was classified as a similar to actual body shape. However, in the recognition type, the frontal and side body types were mixed and classified. It is necessary to study the ergonomic pattern considering the features of each body type. This suggests that psychological effects can be obtained that allow the body shape that changes with age to be accepted more positively.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.804-812
• /
• 2017

This study builds a database that can be reflected in the production of dress form for fitting by typifying the upper body shape of a senior male. This study analyzed the 3D shape data of 405 persons of the 5th Size Korea. The age range is from 50s 210 persons and 60s 205 persons. Analysis items to identify upper body shape of senior males consisted of 51 items. 3D shape data were also measured using a Geomagic Design ${\times}$ program for the analysis of the upper body of the senior male required for the dress form of this study. The reference point was based on the Size Korea 2010 3D measurement standard and created points (Back-protrusion) on shape data. As a result of the senior men type, the senior men's body type was classified into four types:1. Overall, the upper body is a large body type and the most undistorted overall body type 2. Width / Thickness Flatness is the largest and vertical length factor is the smallest abdominal obesity type 3. Severe flexion of the back part type 4. The upper body is small and the scapular bending is severe. The elderly body type showed a high distribution ratio in the type with severe flexion. The development of a dress form that reflects the cause of the finery issue can improve the fit of ready-to-wear.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.925-930
• /
• 2002

This paper discusses techniques for embedding data into 3D polygonal models of geometry. Much researches of Watermarking had been gone as element technology of DRM (digital rights management). But, few research had gone to 3D polygonal model. Most research is limited at text document, 2D image, animation, music etc. RP system is suitable a few production in various goods species, and it is used much in industry to possible reason that produce prototype and find error or incongruent factor at early stage on design in product development childhood. This paper is research about method that insert watermark in STL ( stereolithography) file that have 3D shape model. Proposed algorithm inserts watermark in normal vector region and facet's interior region of 3D shape data. For this reason, 3D shape does not produce some flexure and fulfill invisibility of watermark. Experiment results that insert and extract watermark in normal netter region and facet's Interior region of 3D shape data by proposed algorithm do not influence entirely in 3D shape and show that insertion and extraction of watermark are possible.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.593-599
• /
• 2011

With increasing user applicability of geospatial data, user demand for manifold and accurate information has increased. The usefulness of these services derives from their combination of the advantages of as-built geospatial data in making new content. There is a spatial inconsistency and shape disagreement in fusing heterogeneous data. Conflation, defined as the combining of information from diverse sources so as to reconcile spatial inconsistencies and shape disagreement, is possible solution to the problem. In this research, we developed the technique for removing shape disagreement between aerial image and road map removed spatial inconsistency in advanced research. The process includes four processes: producing of a road candidate image, extraction of vertices, and generation of a graph by connecting the vertices. We could remove the shape disagreement using the extracted road that was derived from finding the road possible path.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.16 no.2
• /
• pp.101-109
• /
• 2014

Bangryeong generally means rectangular collars at present. However, it is estimated that there would be Bangryeong in different shapes besides rectangular shape in ancient times, but there is no accurate evidence. The dispute on the shape of Bangryeong started with the records in Yegi(禮記) and Simui written during Zhou period, China, the oldest records on Bangryeong. However, there are no remains or paintings(pictorial data) accurately proving the different shapes of Bangryeong. While the new shape of Gokgeop(collar of Simui) was mentioned by Zhu Xi during Song period, it was not accurately verified. There are almost no literature, excavated objects or pictorial data on the shapes of Bangryeong which are not definitely identified. The shape of Bangryeong is identified to a certain extent by objects excavated or pictorial data during Yuan and Ming period. There will be definite reasons why Zhou Xibao and Hua Mei, the scholars in China, the y-shaped collar rolled on the chest among the objects excavated during Warring States Period as Bangryeong or Guryeong. Thus, this paper investigated the notes and description in Yegijeongui(禮記正義) and the records and notes during the Han period which are mentioned most frequently except Yegi among the records on Bangryeong. Accordingly, this paper identified that there are different shapes of Bangryeong except rectangular shape during the Han period. It is estimated that Bangyeong at that time had symmetric collars, the collars of Jikryeong which are not overlapped. The collar section after the neck section was straight. It was also said that Bangyeong was women's clothing. In other words, Bangyeong in the Han period suggests that the collar of Jikryeong was Bangryeong. As discussed above, Bangryeong has the long history and different meanings by period. However, it is very difficult to accurately define Bangryeong because there are almost no records on it. Nevertheless, Bangryeong will be discussed more in further study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.510-518
• /
• 2014

In this study, in order to improve and optimize the performance of the turning mechanism for a fish robot in the fluid, we propose the tail joint trajectories using neural networks to mimic the CST(C-shape Sharp Turn) patterns of a real fish which is optimized in the natural environment. In order to mimic the CST patterns of a fish, we convert the sequential recording CST patterns into the coordinate data, and change the numerical coordinate data into a functions. We change the motion functions to the relative joint angles which is adapted to suit robot's shape and data. However, these relative joint trajectories obtained by the sequential recording of the carp have low-precision. It is difficult to apply to the control of a fish robot. Therefore, the relative joint trajectories are interpolated using neural networks with superior generalization ability and applied to the fish robot. we have found that the proposed method using neural networks is superior to ones using high-order polynomial equation through the computer simulations.