• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.1
• /
• pp.97-113
• /
• 2016

This study develops pant patterns using body shape, measurement and shell mesh data to decide optimal women's pants according to styles with excellent size, fit and shape for different individuals and silhouettes. Standard landmarks, lines, triangles and structures were set on a 3D scanned lower body shell to represent women in their twenties and flattened as a 2D pattern. Patterns were created and analyzed according to culotte, formal, slacks and tight type considering crotch shape, location of the crotch point, and adjusting waist darts. Flattened patterns were rotated to compare existing methods. The crease lines were then set through the hip protrusion point and compared. The main factor of the pant pattern were extracted, total rise, crotch depth, crotch width, angle of center line, shape of the center line curve, the thigh width, the amount of waist dart, and crease line position. With going tight style from the culotte, the fits are closer to the figure with minimized thigh circumference, the dart amount decreases, the crotch depth increases, the crotch extensions were shorter, and the angle of the center back increased. The total rise is U shape for culotte and is closer to V shape as the silhouette tightens. T-test of appearance evaluation of the developed pant pattern were conducted after analyzing measurements and shapes of each styles. The results of the developed patterns were superior to existing patterns in accordance to hip line between body and pants as well as appearance evaluation. We found systematic mechanisms among pattern factors that create various pant silhouettes. Evidence on classification of the silhouettes of traditional types of pants were explained objectively through the process of playing out 3D forms.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.117-127
• /
• 2019

The purpose of this study was to analyze the direct measurement data of 40-59 year old middle-aged men from Size Korea's 7th anthropometric survey, and to identify the body shape characteristics and to type the body shape of middle-aged men. Through this, this study aimed to provide basic data necessary for the clothing patterns of middle-aged men with excellent fit. The data was SPSS Ver. 24.0 program analysis. Factors extracted six including body horizontal, vertical, shoulder, waist front length, leg thickness, and shoulder deflections. The body shape of middle-aged men was classified into three types. Type 1 had a thin body circumference, a narrow width, a low height, a short waist front length, and a thin ankle and calf. Type 2 had a high body height, a long waist front length, a normal circumference and width, a thick ankle, a calf, and a sagging shoulder. Type 3 had a large body circumference, a wide body, a wide shoulder, and a long waist front length. A prominent feature of the changes in body shape of middle-aged men is the increase in the circumference and thickness items due to abdominal protrusion and fat accumulation. Therefore, pattern design according to these physical characteristics is considered to be necessary.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.81-91
• /
• 2019

In this study, 3D measurement data of 70 to 85 years old men were analyzed to investigate the body shape characteristics. and the type of the whole body of older men. Through this study, we aimed to provide basic data necessary for making good clothes for elderly men. We analyzed the body shape of elderly males using Korea 's 2015 elderly anthropometric data by SPSS Ver. 24.0. The body shape of older males was classified into four types: 'thin & long inverted triangle with thick legs', 'thick & short inverted triangle with bird legs', 'thick & long triangle with thick legs', 'thick & short triangle with thick legs'. As the age increases, the shoulders are sagging, the progressive reduction of the spine leads to a decrease in height, and the backbone refraction causes a decrease in the anterior center length and an increase in the back length. In addition, as the age increases, the chest circumference decreases and the abdomen and waist circumference increase. Considering these physical changes, it is necessary to set the length of the garment to 2-3cm shorter in the case of the aged layer. Waist and abdomen area are increased, it is considered that it will be necessary to add more margin of 2cm than general silver clothing when setting the margin amount. When setting the length of the upper body, it is considered that the front center length should be reduced and the back length should be increased to keep the bottom level. In this study, only the elderly males aged 70-85 years were included in the analysis of the whole body type. It is significant that the studies so far have been extended to those older than 70 years. Future research will need to be applied to the development of silver clothing through comparison of older men 's body shape in their 60s and 70s.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.301-304
• /
• 2002

Recently, database technologies have been used commonly. But, ordinary technologies aren't suitable to construct a complicated database such as a classical literature database or an archaeological relic's database. Because this kinds of data are semi-structured data that doesn't have regular structures, database schema can't be defined before databases. We have proposed DREAM model for semi-structured databases. In this model, a database consists of five elements and the model has operations similar to operation of set theory. And further we have introduced dynamic schema "shape" showing structure of each element. We have already realized a prototype of DBMS adopting DREAM model (DREAM DBMS) and constructing function of shapes. However, shape is imperfect to describe database structures because it can't explain nested structures of elements. In this paper, we will profuse a "shape graph"that is dynamic schema showing database structures more exactly and extend the DREAM DBMS. Further we will evaluate the performance of constructing function of shapes and shape graphs.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.2
• /
• pp.29-36
• /
• 2014

Finite failure NHPP software reliability models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, proposes the Gompertz distribution reliability model, which made out efficiency application for software reliability. Algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on mean square error (MSE) and coefficient of determination$(R^2)$, for the sake of efficient model, was employed. Analysis of failure using real data set for the sake of proposing fixed shape parameter of the Gompertz distribution was employed. This analysis of failure data compared with the Gompertz distribution model of shape parameter. In order to insurance for the reliability of data, Laplace trend test was employed. In this study, the proposed Gompertz model is more efficient in terms of reliability in this area. Thus, Gompertz model can also be used as an alternative model. From this paper, software developers have to consider the growth model by prior knowledge of the software to identify failure modes which can was helped.

• Smart Structures and Systems
• /
• v.10 no.4_5
• /
• pp.485-499
• /
• 2012

Mode shape expansion is useful in structural dynamic studies such as vibration based structural health monitoring; however most existing expansion methods can not consider the modelling errors in the finite element model and the measurement uncertainty in the modal properties identified from vibration data. This paper presents a reliable approach for expanding mode shapes with consideration of both the errors in analytical model and noise in measured modal data. The proposed approach takes the perturbed force as an unknown vector that contains the discrepancies in structural parameters between the analytical model and tested structure. A regularisation algorithm based on the Tikhonov solution incorporating the L-curve criterion is adopted to reduce the influence of measurement uncertainties and to produce smooth and optimised expansion estimates in the least squares sense. The Canton Tower benchmark problem established by the Hong Kong Polytechnic University is then utilised to demonstrate the applicability of the proposed expansion approach to the actual structure. The results from the benchmark problem studies show that the proposed approach can provide reliable predictions of mode shape expansion using only limited information on the operational modal data identified from the recorded ambient vibration measurements.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1634-1637
• /
• 2003

Any given object on the motor-driven turntable is pictured from 8 to 72 different views with a digital camera. 3D shape reconstruction is performed with the integrated software called by Scanware from these multiple digital photographs. There are several steps such as configuration, calibration, capturing, segmentation, shape creation, texturing and merging process during the shape reconstruction process. 3D geometry data can be exported to cad data such as Autocad input file. Also 3D image model is generated from 3D geometry and texture data, and is used to advertise the model in the internet environment. Consumers can see the object realistically from wanted views by rotating or zooming in the internet browsers with Scanbull spx plug-in. The spx format allows a compact saving of 3D objects to handle or download. There are many types of scan equipments such as laser scanners and photogrammetric scanners. Line or point scan methods by laser can generate precise 3D geometry but cannot obtain color textures in general. Reversely, 3D image modeling with photogrammetry can generate not only geometries but also textures from associated polygons. We got various 3D image models and introduced the process of getting 3D image model of an internet-connected watchdog robot.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.4
• /
• pp.16-21
• /
• 2008

The demand for three-dimensional (3D) shape measurements is increasing in a variety of fields, including the manufacture of molds and dies. The most popular technology for 3D shape measurement is the coordinate measuring machine (CMM) with a contact trigger probe. Although a CMM provides a high degree of accuracy, it is inefficient due to its long measuring time. It also has difficulty measuring soft objects that can be deformed by the touch of the contact probe. In addition, a CMM cannot digitize areas that are difficult to reach, and cannot capture very minute details on the surface of complex parts. For these reasons, optical non-contact measurement techniques are receiving more attention since they eliminate most of the problems associated with contact methods. Laser scanning is emerging as one of the more promising non-contact measurement techniques. This paper describes various acquisition considerations for laser scanning, including the accuracy of the 3D scan data, which depends on the charge-coupled device (CCD) gain and noise. The CCD gain and noise of a 3D laser scanner are varied while keeping the other conditions constant, and the measurement results are compared to the dimensions of a standard model. The experimental results show that a considerable time savings and an optimum degree of accuracy are possible by selecting the proper CCD gain and noise.

• Journal of Fashion Business
• /
• v.22 no.3
• /
• pp.122-142
• /
• 2018

In the virtual fitting system, the use of a 3D avatar is not a simple garment model, but it should be able to reproduce the size and shape of the customer using a fitting system. Although various virtual fitting systems have their own 3D avatar sizing systems and provide 3D avatars that match the size of the customer, there are limitations in realizing the actual body shape in actual use by the consumer. The purpose of this study is to realize a 3D avatar with excellent size and conformity for customer use. Therefore, this study aims to provide basic data for the formation of a 3D standard avatar of Korean women aged in their 20's, by comparing and analyzing the degree of the consumer user friendly system change of a body type, and the consumer's ability in selecting a consumer representative body type. Based on the survey data of 'Size Korea' conducted from 2004 to 2015 at three times, we examined the change of body shape over 10 years. Then, based on the results of 6th and 7th data, 4 factors of the concurrent body shape change of women of the consumer demographic studied were selected through the use of a factor analysis. Following this analysis, the 4 extracted factors were clustered again and finally released 7 representative body types, which were obtained based on height and weight. The size of each representative figure is derived by the use of a regression analysis, and it is used as a basic data for 3D avatar formation of the virtual fitting system.

• Fashion & Textile Research Journal
• /
• v.22 no.4
• /
• pp.495-503
• /
• 2020

This study classified lower body shape according to thigh and waist shape to improve the fit of skinny blue jeans in adult women in their 20s. We analyzed the three-dimensional automatic measurement data, three-dimensional indirect measurement data, and index data using the three-dimensional female (20-29 years old) body scan data provided by Size Korea (6^th Korean Human Dimensional Survey Project). Factor analysis was performed to classify body type. We selected and analyzed 34 items related to thigh shape based on index items, angle items, and protrusion amount items from 99 items; consequently, seven factors were extracted and 82.39% of the total variance was explained. Cluster analysis according to factor analysis classified it into 4 types, and a post-test Duncan test was conducted to classify thigh features according to classified types. As a result, the characteristics of lower body shape according to the thigh types of women in their 20s are as follows. Lower Body Type 1 is shape with a more prominent belly and less prominent thighs. Lower Body Type 2 is a slender body figure with larger hips. Lower Body Type 3 has more prominent thighs compared to the waist and belly. Lower Body Type 4 has both a prominent belly and prominent thighs.