• Applied Microscopy
• /
• v.42 no.2
• /
• pp.67-76
• /
• 2012

The biomimetic approach on the cuticular spinning nozzles of the major ampullate silk glands in the golden-web spider Nephila calvata has been attempted using various visualizing techniques of light and electron microscopes to improve the design of spinning nozzle for producing synthetic nanofibers spun from electrospinning apparatus. The major ampullate spigot which has the most effective nozzle system to produce nanofibers for dragline silk with high strength and elasticity is connected via the bullet type spigot on anterior spinneret with flexible terminal segment. The excretory duct which transports the liquid silk feedstock from ampulla to spigot is divided into 3 limbs by loops back on itself to form an S-shape morphology that is bundled in connective tissue. Final diameter of the nanofibers at nozzle was dramatically reduced by gradual narrowing of duct cuticle less than 10 times comparing to its original size of funnel region. Moreover, the funnel has a characteristic cuticular organization with porous microstructure which seems to be related to water removal from feedstock of silk precursors. High magnification electron micrographs also reveal the presence of the spiral grooves on the surface of the cuticular intima near the valve which presumed to reduce friction during rapid flow of liquid silk.

• Journal of Food Hygiene and Safety
• /
• v.31 no.4
• /
• pp.286-293
• /
• 2016

This study is an experiment for gastric protective effects of ursolic acid. In order to identify the effects of ursolic acid on gastrointestinal disorder, acute and chronic gastritis were also observed using HCl ethanol and indomethacin-induced gastric lesion models, respectively. As for gastric acid, it was also identified through proton pump ($H^+/K^+-ATPase$) inhibiting activity. In regards to protective factor for gastric damage, prostaglandin $E_2$ ($PGE_2$) was quantitatively analyzed. Antibacterial activity experiment was done on Helicobacter pylori (H.pylori), which is known to be the causing factor of chronic gastritis, gastric ulcer and gastric cancer. By making use of AGS cell, it was confirmed that ursolic acid was involved in apoptosis of gastric cancer cell through 4',6-diamidino-2-phenylindol (DAPI) staining and flow cytometry analysis. As a result, ursolic acid reduced gastric lesions caused by HCl ethanol and indomethacin. Ursolic acid inhibited acid secretion by inhibiting proton pump ($H^+/K^+-ATPase$), which is the gastric acid secreting enzyme involved at the final phase of gastric acid secretion. And ursolic acid was identified with gastric mucosa protection effects by increasing the concentration of $PGE_2$, a protective factor of gastric mucosa preservation. The antibacterial activity on H. pylori, which is aggressive factor in gastrointestinal disorder, ursolic acid showed inhibitory effects on H. pylori colonization. In the DAPI nuclear staining, unlike the control group, shape of the nucleus has deformed, and has been observed either shrinked cell or chromatin condensation phenomenon. In the Flow cytometry assay, confirmed the growth rate of apoptosis in a concentration-dependent manner.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.1
• /
• pp.69-74
• /
• 2015

To analyze quantitatively environmental characteristics of cultivation area of citrus, Satsuma mandarin (Citrus unshiu Marc.), we made digital maps of environmental elements such as topography and climate. Elevation, degree of slope, and slope aspect were selected as elements of topological environment, and the annual mean air temperature, annual total precipitation, mean air temperature on January, extreme value of daily minimum air temperature, and the number of days below $-5^{\circ}C$ were selected as elements of climatic environments. The grid values of 8 environmental elements were extracted by shape of citrus farm area and analyzed distribution patterns. We can determine 3 agroclimatic criteria for growing Satsuma mandarin as over $14.5^{\circ}C$ of annual mean air temperature, over $-10.0^{\circ}C$ of extreme value of daily minimum air temperature, and less 5 days of below $-5^{\circ}C$ of daily minimum air temperature.

• The Journal of the Korea Contents Association
• /
• v.12 no.9
• /
• pp.136-145
• /
• 2012

This research proposes a pattern making method for women's bodice by the characters of body types and develops bodice dress forms on their body shapes applying 3D body scan data. 515 women's body scan data was collected and analyzed factor and cluster analysis. Three body types were characterized in normal, obese, and slim group. In each group, 10 subjects were selected. 20 parts in 3D anthropometric data were measured using Autocad program. The amount of waist dart was calculated and three types of basic bodice pattern were developed using the calculated darts data. The amount and the position of front dart and side dart were different at obese group in comparison of normal and thin group. The three types of basic bodice model were made by the basic bodice pattern, and each model was scanned by 3D scanner to make 3D bodice dress forms. Three types of bodice dress forms were rendered using 3D max program. Bodice dress forms had the dart lines and were useful to draft patterns to fit their body shape.

• Journal of Life Science
• /
• v.27 no.2
• /
• pp.211-216
• /
• 2017

This study aims to reduce the production cost of mushrooms and therefore boost the income of mushroom producers. The addition of a 10% concentration of herb medicine refuse was adequate for promoting mycelium growth in Flammulina velutipes. A moisture content of 60% in the culture medium was adequate for promoting hyphal growth. The optimum temperature and humidity were $16^{\circ}C$ and 70%-85%, respectively. The average yield of Flammulina velutipes fruting body per 1,100 ml bottle was 275-282 g, which is similar to that of the control. The outbreak of diseases such as mildew and bacterial blotch in mushroom was never observed in the bottle treated with herb medicine refuse. Fewer deformed and second-class quality mushrooms were observed than in the control group. Deviation reduced, and mushroom growth was observed to be significantly uniform. The winter mushroom had a white fruiting body with a hemispherical shape. The diameter of the mushroom cap was 9.2-9.3 mm, stipe length was 12.7-12.8 cm, and thickness was 3.3-3.4 mm; these were almost the same as those in the control group. The partial hardness of winter mushrooms in both the experimental and the control groups showed that the stipe ($54.6-57.3g/cm^2$) is a little harder than the mushroom cap ($46.8-47.6g/cm^2$). The calories and nutrients per 100 g of mushrooms in the control and samples were similar to each other.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.25-34
• /
• 2019

VTON (Virtual try-on) is a key technology that can activate the online commerce of fashion items. However, the early 3D graphics-based methods require the 3D information of the clothing or the human body, which is difficult to secure realistically. In order to overcome this problem, Image-based deep-learning algorithms such as VITON (Virtual image try-on) and CP-VTON (Characteristic preserving-virtual try-on) has been published, but only a sampled results on performance is presented. In order to examine the strength and weakness for their commercialization, the performance analysis is needed according to the complexity of the clothes, the object posture and body shape, and the degree of occlusion of the clothes. In this paper, IoU and SSIM were evaluated for the performance of transformation and synthesis stages, together with non-DL SCM based method. As a result, CP-VTON shows the best performance, but its performance varies significantly according to posture and complexity of clothes. The reasons for this were attributed to the limitations of secondary geometric deformation and the limitations of the synthesis technology through GAN.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.6
• /
• pp.263-268
• /
• 2013

Objectives: The interforminal region, between the mandibular foramen, is known as a relatively safe area that is free of anatomic structures, such as inferior alveolar nerve, submandibular fossa, and lingual side of the mandible is occasionally neglected for its low clinical importance. Even in the case of a severely constricted alveolus, perforation of the lingual cortical bone had been intended. However, anterior extension of the inferior alveolar canal, important anatomic structure, such as concavity of lingual bone, lingual foramina, and lingual canal, has recently been reported through various studies, and untypical bleeding by perforation of the lingual plate on implantation has also been reported. Therefore, in this study, we performed radiographic and statistical analysis on distribution and appearance frequencies of the lingual foramina that causes perforation of the mandibular lingual cortical bone to prevent complications, such as untypical bleeding, during surgical procedure. Materials and Methods: We measured the horizontal length from a midline of the mandible to the lingual foramina, as well as the horizontal length from the alveolar crest to the lingual foramina and from the lingual foramina to the mandibular border by multi-detector computed tomography of 187 patients, who visited Dankook University Dental Hospital for various reasons from January 1, 2008 to August 31, 2012. Results: From a total of 187 human mandibles, 110 (58.8%) mandibles had lingual foramina; 39 (20.9%) had bilateral lingual foramen; 34 (18.2%) had the only left lingual foramen; and 37 (19.8%) had the only right lingual foramen. Conclusion: When there is consistent bleeding during a surgical procedure, clinicians must consider damages on the branches of the sublingual artery, which penetrate the lingual foramina. Also, when there is a lingual foramina larger than 1 mm in diameter on a pre-implantation computed tomography, clinicians must beware of vessel damage. In order to prevent these complications and progress with a safe surgical procedure, a thorough radiographic examination before the surgery is indispensable. Further, clinicians should retract lingual flap definitely to confirm the shape of the lingual bone and existence of the lingual foramina.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.1-7
• /
• 2014

PURPOSE. The accuracy of a gypsum model (GM), which was taken using a conventional silicone impression technique, was compared with that of a polyurethane model (PM), which was taken using an iTero$^{TM}$ digital impression system. MATERIALS AND METHODS. The maxillary first molar artificial tooth was selected as the reference tooth. The GMs were fabricated through a silicone impression of a reference tooth, and PMs were fabricated by a digital impression (n=9, in each group). The reference tooth and experimental models were scanned using a 3 shape convince$^{TM}$ scan system. Each GM and PM image was superimposed on the registered reference model (RM) and 2D images were obtained. The discrepancies of the points registered on the superimposed images were measured and defined as GM-RM group and PM-RM group. Statistical analysis was performed using a Student's T-test (${\alpha}=0.05$). RESULTS. A comparison of the absolute value of the discrepancy revealed a significant difference between the two groups only at the occlusal surface. The GM group showed a smaller mean discrepancy than the PM group. Significant differences in the GM-RM group and PM-RM group were observed in the margins (point a and f), mesial mid-axial wall (point b) and occlusal surfaces (point c and d). CONCLUSION. Under the conditions examined, the digitally fabricated polyurethane model showed a tendency for a reduced size in the margin than the reference tooth. The conventional gypsum model showed a smaller discrepancy on the occlusal surface than the polyurethane model.

• Journal of The Korean Association For Science Education
• /
• v.14 no.1
• /
• pp.58-69
• /
• 1994

In this study, with the problem of "What is the desirable illustrations?", the problem points of the existing textbooks were analyzed, and the opinions of experts concerning desirable illustrations were examined through questionaire survey, and by developing 'Analysis Framework of Illustrations', and Korean-Japanese 'science' textbooks were analyzed and compared with. The conclusions for the direction of korean 'science' textbooks are summarized as follows : 1) The numbers of korean illustrations should be more about two than one of per one page of the existing textbooks. 2) The korean illustrations for the 6th grade should be more largely inserted. 3) The more econmic space utilizing measure should be groped for looking at from the such side. 4) Though the kinds of Korean illustrations are mostly composed of photographs, pictures, illustrations, cartoons, etc. should be positively utilized. and the shapes of photographs should be diversified by such as square, round shape,omissions of background and others. 5) The distribution of players by sex should be considered envenly for male and female from the ascendency of male (1.5: 1). 6) It was found that it is desirable for the formation of role of illustrations of 20% for motive inducement, 45% for guidance for experimentation, 30% for presentation of data, and 5% for presentation of the results of experimentation. 7) The illustrations for guidance for experimentation should present important stages of experimentation process regardless the number of illustration. 8) It would be advantageous for motive induction to find the subject matters as possible as from the children's close actual life. 9) It is necessary to induce more freely method in utilizing Printing plate for inserting illustrations. 10) It is the result of research that the existing Korean textbooks are not suitable in inducing interest, and the positive strategy to induce interest is demanded. 11) It is required to select their location freely in accordance with the content regardless the. 12) In order to develop such illustrations, it is required to cultivate expert illustrators, and more economic investment is required for development of illustrations. The emphasis matters of revision of the 6th educational process of 'Inducement of study motive and emphasis on interest' is the change of presenting form and method of illustrations, which is expected to be rewarded with much good fruits.

• Culinary science and hospitality research
• /
• v.17 no.2
• /
• pp.1-17
• /
• 2011

The purpose of this study is to make an evaluation on menu selection and satisfaction levels of the tourists who visit Korean restaurants in Busan. This study aims to propose general, strategic plans for improving the menu quality management of Korean restaurants in the future and find out measures to make restaurant users satisfied and revisit. A survey was conducted on ordinary people who had visited Korean restaurants in tourist hotels in Busan. A total of 310 copies of questionnaire were distributed to them from September 1 to 30, 2008. The SPSS/PC+ for Window 12.0 was used for data processing and analysis. As a result, it was found that selection attributes of Korean restaurant menu had an effect on customer satisfaction and revisit intention, and the most influential factors were health and menu designs. These days, people are getting more interested in keeping in shape with the Well-being trend. Such a modern trend is an important factor when selecting menu items. Therefore, when menu management is considered, health-related factors need to be considered more than anything else. In addition, various and unique menu items need to be designed to draw people's curiosity and make customers revisit.