• Journal of KIISE:Software and Applications
• /
• v.27 no.7
• /
• pp.731-741
• /
• 2000

This paper proposes a method to detect a facial region and extract facial features which is crucial for visual recognition of human faces. In this paper, we extract the MER(Minimum Enclosing Rectangle) of a face and facial components using projection analysis on both edge image and binary image. We use an active contour model(snakes) for extraction of the contours of eye, mouth, eyebrow, and face in order to reflect the individual differences of facial shapes and converge quickly. The determination of initial contour is very important for the performance of snakes. Particularly, we detect Minimum Enclosing Rectangle(MER) of facial components and then determine initial contours using general shape of facial components within the boundary of the obtained MER. We obtained experimental results to show that MER extraction of the eye, mouth, and face was performed successfully. But in the case of images with bright eyebrow, MER extraction of eyebrow was performed poorly. We obtained good contour extraction with the individual differences of facial shapes. Particularly, in the eye contour extraction, we combined edges by first order derivative operator and zero crossings by second order derivative operator in designing energy function of snakes, and we achieved good eye contours. For the face contour extraction, we used both edges and grey level intensity of pixels in designing of energy function. Good face contours were extracted as well.

• The Korean Journal of Quaternary Research
• /
• v.4 no.1
• /
• pp.41-57
• /
• 1990

Gravel shapes of the terrace gravel sequences are compared with the present river gravels and beach gravels in the Pohang and its surrounding areas. Seventeen gravel textural parameters are divided into 5 groups based on R-mode factor analysis. Among them, three parameters (RDm, MPSm, SZstd) are selected for a test of discriminant possibility of palaeoenvironment of the terrace gravel deposits. Marine gravels are in the range of 0.49 to 0.75 in mean roundness, 0.46 to 0.78 in mean maximum projection sphericity and 0.39 to 1.85 in standard deviation of size, whereas river gravels are 0.28 to 0.51 in mean roundness, 0.66 to 0.72 in mean maximum projection sphericity and 1.04 to 1.81 in standard deviation of size. For practical access to the palaeoenvironment discrimination, a bivariant diagram between mean roundness and mean maximum projection sphericity is the most effective. The marine terrace gravels are plotted within the variation range of present beach gravels and show 0.49 to 0.71 in mean roundness and 0.59 to 0.66 in mean maximum projection sphericity. The gravels of river terrace vary within the range of gravels derived from present river bed and are characterized as 0.36 to 0.48 in mean roundness and 0.66 to 0.71 in mean maximum projection sphericity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.251-258
• /
• 2011

Steel pipe piles have been used as various deep foundation materials for a long time. Recent increase in steel material cost has made engineers reluctant in using it even with its good quality and ease of construction. Therefore when constructing with steel pipe pile, the decision to reuse the excessive pile length that is cut off from the designed pile head elevation after pile driving can be cost saving. This has caused many constructors to reuse the pile leftovers with new piles, but the absence of quantitative structural capacity behaviors of steel pipe pile after pile driving or appropriate countermeasures and standards in reusing steel pipe pile has resulted in wrong applications, pile structural integrity problems, inappropriate limitation of reusable pile length, etc. The structural performance analysis between a new pile and a pile that has undergone working state and ultimate state stress level during pile driving was performed in this research by means of comparing the results between the dynamic pile load test, tensile load test, charpy energy test and fatigue test for high strength steel of $440N/mm^2$ yield strength. Test results show that under working load conditions the yield strength variation is less than 2% and for ultimate load conditions the variation is less than 5% for maximum total blow count of 3000. The results have been statistically analyzed to check the sensitivity of each factors involved. From the test results, reusability of steel pipe pile lies not in the main pipe yield strength deviation but in the reduction of absorb energy, strength changes and quality control at the welded section, shape deformation and local buckling during pile driving.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.501-513
• /
• 2004

Purpose : The purpose of this study was to evaluate the effects of etching time on shear bond strength of four resin cements to IPS Empress 2 ceramic. Material and Methods: Forty rectangular shape ceramic specimens ($10{\times}15{\times}3.5mm$ size) were used for this study. The ceramic specimens divided into four groups and were etched with 10% hydrofluoric acid for 0, 10, 30, 60, 180, 300, 420, 600, and 900 seconds respectively. Etched surfaces of ceramic specimens were coated with ceramic adhesive system and bonded with four resin cement (Variolink II, Panavia F, Panavia 21, Super-Bond C&B) using acrylic glass tube. All cemented specimens were tested under shear loading untill fracture on universal testing machine at a crosshead speed 1mm/min: the maximum load at fracture (kg) was recored. Shear bond strengh data were analyzed with oneway analysis of variance and Tukey HSD tests (p<.05). Etched ceramic surfaces (0-, 60-, 300-, and 600-seconds etching period) and fracture surfaces after shear testing were examined mophologically using scanning electron microscopy. Results : Ceramic surface treatment with 10% hydrofluoric acid improved the bond strength of three resin cement except for Super-Bond C&B cement. Variolink II (41.0$\pm$2.4 MPa) resin cement at 300-seconds etching time showed statistically higher shear bond strength than the other resin cements (Panavia F: 28.3$\pm$2.3 MPa, Panavia 21: 21.5$\pm$2.2 MPa, Super-Bond C&B: 16.7$\pm$1.6 MPa). Ceramic surface etched with 10% hydrofluoric acid for 300 seconds showed more retentive surface texture. Conclusion: Within the limitation of this study, Variolink II resin cement are suitable for cementation of Empress 2 all-ceramic restorations and etching with 10% hydrofluoric acid for 180 to 300 seconds is required to enhance the bond strength.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.12
• /
• pp.1696-1701
• /
• 2006

A random regression model was applied for the first time for the analysis of test day records and to study the genetic persistency of first lactation milk yield of Indian Murrah buffaloes. Wilmink's Function was chosen to describe the shape of lactation curves. Heritabilities of test day milk yield varied from 0.33 to 0.58 in different test days. The highest heritability was found in the initial test day ($5^{th}$ day) milk yield. Genetic correlations among test day milk yields were higher in the initial test day milk yield and decreased when the test day interval was increased. The magnitude of genetic correlations between test day and 305 day milk yield varied from 0.25 to 0.99. The genetic persistencies of first lactation milk yield were estimated based on daily breeding values using two methods. $P_1$ is the genetic persistency estimated as a summation of the deviation of estimated daily breeding value on days to attain peak yield from each day after days to attain peak yield to different lactation days. $P_2$ is the genetic persistency estimated as the additional genetic yield (gained or lost) from days to attain peak yield to estimated breeding value on different lactation days relative to an average buffalo having the same yield on days to attain peak yield. The mean genetic persistency on 90, 120, 180, 240, 278 and 305 days in milk was estimated as -4.23, -21.67, -101.67, -229.57, -330.06 and -388.64, respectively by $P_1$, whereas by $P_2$ on same days in milk were estimated as -3.96 (-0.32 kg), -23.94 (-0.87 kg), -112.81 (-1.96 kg), -245.83 (-2.81 kg), -350.04 (-3.28 kg) and -407.58 (-3.40 kg) respectively. Higher magnitude of rank correlations indicated that the ranking of buffaloes based on their genetic persistency in both methods were similar for evaluation of genetic persistency of buffaloes. Based on the estimated range of genetic persistency three types of genetic persistency were identified. Genetic correlations among genetic persistency in different days in milk and between genetic persistencies on the same day in milk were very high. The genetic correlations between genetic persistency for different days in milk and estimated breeding value for 305 DIM was increased from 90 DIM to 180 DIM, and highest around 240 DIM which indicates a minimum of 240 days as an optimum first lactation length might be required for genetic evaluation of Indian Murrah buffaloes.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.9
• /
• pp.1460-1468
• /
• 2007

In this study, an approx. 2.5-kb gene fragment including the catalase gene from Rhodospirillum rubrum S1 was cloned and characterized. The determination of the complete nucleotide sequence revealed that the cloned DNA fragment was organized into three open reading frames, designated as ORF1, catalase, and ORF3 in that order. The catalase gene consisted of 1,455 nucleotides and 484 amino acids, including the initiation and stop codons, and was located 326 bp upstream in the opposite direction of ORF1. The catalase was overproduced in Escherichia coli UM255, a catalase-deficient mutant, and then purified for the biochemical characterization of the enzyme. The purified catalase had an estimated molecular mass of 189 kDa, consisting of four identical subunits of 61 kDa. The enzyme exhibited activity over a broad pH range from pH 5.0 to pH 11.0 and temperature range from $20^{\circ}C$ to $60^{\circ}C$C. The catalase activity was inhibited by 3-amino-1,2,4-triazole, cyanide, azide, and hydroxylamine. The enzyme's $K_m$ value and $V_{max}$ of the catalase for $H_2O_2$ were 21.8 mM and 39,960 U/mg, respectively. Spectrophotometric analysis revealed that the ratio of $A_{406}$ to $A_{280}$ for the catalase was 0.97, indicating the presence of a ferric component. The absorption spectrum of catalase-4 exhibited a Soret band at 406 nm, which is typical of a heme-containing catalase. Treatment of the enzyme with dithionite did not alter the spectral shape and revealed no peroxidase activity. The combined results of the gene sequence and biochemical characterization proved that the catalase cloned from strain S1 in this study was a typical monofunctional catalase, which differed from the other types of catalases found in strain S1.

• Journal of the Korean Regional Science Association
• /
• v.15 no.2
• /
• pp.155-187
• /
• 1999

The East Asian Region has experienced remarkable economic growth and transformation of interurban networking over the past three decades, and urban competiti veness for a networking hub in this region has become a critical issue confronting cities. Competitiveness of the Seoul capital region for a networking hub in Northeast Asia is outstripped by other competing cities in East Asia, notwithstanding its geo-politically and geo-economically advantageous location in this region. In this paper, we aim to appraise the Seoul capital region's competitiveness in terms of logistics distribution, financial function and logistics distribution, financial function and agglomeration of transnational corporations (especially of RHOs and other managerial functions), and to advance the networking strategies of the region for a Northeast Asia hyb. As a result of analysis, we suggest that the Seoul capital region be developed as a Northeast Asian center for regional headquarters or leading global corporations and financial services for being a strategic nodal point in Northeast Asia in the 21st century. A recent survey shows that where to locate an RHQ is influenced by various factors, such as potential market and manufacturing site in the city's hinterland, quality of life, such things as culture, health, safety, education, a well-educated, English-speaking population, reliable air transport, state-of-the-art communications, and an active policy to offer foreign companies generous incentives. The Seoul capital region, which is located at a strategic nodal point advantageous as a springboard for its Northeast Asian hinterland, cannot meet the other conditions mentioned above. To overcome these drawbacks in attracting transnational capital and to create competitiveness as a strategic hub of RHQs in Northeast Asia, it is urgent to initiate a structural reform of the Korean economy, politics, and overall society, to minimize the regulation of FDI, and to provide various incentives for foreign investment. Moreover, we propose the construction of an 'International Business Town' in the Seoul capital region, as a medium to intermediate these strategies and to shape them in a spatial scale. The projected 'International Business Town(IBT)' will be a 'free city' open to international business in which liberal economic activities are guaranteed by special legislation and administration, infrastructures needed for international and improved accessibility to the airport are furnished, and the preference of foreign high-income investors for cultural and living environment are satisfactorily met. IBT is conspicuously differentiated from a raft of other cities' incentives in that it combines deregulation and incentive programs to attract the investment of transnational capital, with a spatial program of offering an urban environment preferred by the high-income investors for cultural and living environment are satisfactorily met. IBT is conspicuously differentiated from a raft of other cities' incentives in that it combines deregulation and incentive programs to attract the investment of transnational capita, with a spatial program of offering an urban environment preferred by the high-income and managerial class. Furthermore, it can be an excellent way of overcoming the xenophobia that has spread among the Korean population by concentrating foreign businesses and their lifestyles in a specific foreign businesses and their lifestyles in a specific zone. In conclusion, 'International Business Town', in line with other legislative and administrative incentive programs, will function as a driving force to make the Seoul capital regional more competitive as a regional business hub in Northeast Asia.

• Research in Plant Disease
• /
• v.23 no.1
• /
• pp.56-59
• /
• 2017

During growing season of 2011 to 2013, Sclerotinia rot symptoms consistently have been observed on basil in Yesan-gun, Chungcheongnam-do in Korea. The typical symptom formed initially brownish spot on leaf and stem, and then advancing margins, wilting the whole plant and blighting, eventually died. On the surface of diseased lesions was observed cottony, white, dense mat of mycelial growth, and sclerotia ($30-100{\mu}m$ diameter) formed on stem and leaf. Morphological and cultural characteristic on potato dextrose agar, color of colony was white and colorless chocolate, sclerotium of irregular shape of the oval was black and $5-50{\mu}m$ diameter in size. In pathogenicity test, necrosis and wilt of the inoculated stem were observed in all plants and the pathogen was reisolated from stems. On the basis of mycological characteristics, pathogenicity, and internal transcribed spacer rDNA sequence analysis, this fungus was identified as Sclerotinia sclerotiorum. This is the first report of Sclerotinia rot on basil caused by S. sclerotiorum in Korea.

• Journal of Veterinary Clinics
• /
• v.32 no.3
• /
• pp.278-281
• /
• 2015

An 8-year-old male red fox (Vulpes vulpes) in Species Restoration Technology Institute of Korea National Park Service (KNPS), revealed nodular growths in its ventro-cervical region. The fox was introduced from Young-Yang Gun in 2012 to KNPS for re-introduction of the red fox. It has been cared in captive facility and showed the mass in August 2013 that was sent to Wildlife Medical Center. For the diagnosis of underlying disease and cervical mass, radiographical and sonographical examinations, complete blood count, serum chemistry analysis, peripheral blood smear examination and surgical removal of the mass were performed. The mass was fixed in 10% neutral buffered formalin and processed routinely for haematoxylin and eosin (HE) stain. Based on hematological and serum chemical examination, the fox showed mild leukocytosis, thrombopenia, increase of creatine kinase MB (CKMB) and uric acid. However, it was considered as no clinical relevance since the fox showed no related clinical signs. Macroscopically, the mass was round shape, whitish and well-demarcated. Microscopically, it was diagnosed as a lipoma consisting of mature adipose tissue. Lipoma is a common benign tumor in most domestic animals, however it has never been reported in the red fox. The present case report provides comprehensive diagnosis of a subcutaneous lipoma in a red fox.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.571-588
• /
• 2016

Eucalyptus pellita F. Muell is one of pulp woods that is being developed through breeding plantation programs in Indonesia. The research aimed at exploring the chemical and morphological characteristics of fiber, and to determine the rank of plus trees from 4 provenances based on the suitability for pulps. The materials included the plus trees of E. pellita (9 years) from the 2nd generation of progeny tests in Pelaihari, South Borneo. Wood properties under investigation included the chemical properties and morphological fiber characteristics (fiber dimensions and its derived properties). In the present study, data were analyzed using descriptive statistic, Analytic Hierarchy Process (AHP) and Pearson's correlation. Results showed that the chemical properties of E. pellita, i.e. the contents of ethanol-toluene extractives, hot water soluble extractives, holocellulose, alphacelullose, and lignin were $3.08{\pm}1.00%$, $1.41{\pm}0.38%$, $75.26{\pm}2.58%$, $49.02{\pm}2.88%$, and $29.49{\pm}1.86%$, respectively. The average values of wood fiber morphology were $1.02{\pm}0.08$ mm (fiber length), $13.25{\pm}1.64{\mu}m$ (fiber diameter), of $6.94{\pm}1.70{\mu}m$ (lumen diameter), $3.15{\pm}0.52{\mu}m$ (fiber wall thickness), $0.97{\pm}0.30$ (Runkel ratio), $0.57{\pm}0.10$ (Luce's shape factor), $78.21{\pm}10.34$ (slenderness ratio) and $130.91{\pm}33.77{\times}10^3{\mu}m^3$ (solids factor). The AHP scoring rank indicated that the best individuals were 28.4.3.28 (Kiriwo Utara), 12.1.5.28 (North Kiriwo), 19.11.5.45 (Serisa Village), 3.8.4.9 (South Kiriwo), and 6.6.3.15 (South Kiriwo). Pearson correlation analysis showed significant correlations between the levels of fiber length with alpha-cellulose content (r = 0.39) as well as the fiber length with ethanol-toluene extractive contents (r = -0.41).