• 제목/요약/키워드: Shape Accuracy

검색결과 1,648건 처리시간 0.03초

가새좌굴을 고려한 역 V형 가새골조의 기둥부재 내진설계법 (Seismic Design of Columns in Inverted V-braced Steel Frames Considering Brace Buckling)

  • 조준희;김정재;이철호
    • 한국강구조학회 논문집
    • /
    • 제22권1호
    • /
    • pp.1-12
    • /
    • 2010
  • 현행 강구조내진설계철학의 근거인 역량설계법(capacity design method)에 의할 때 중심가새골조의 에너지 소산요소인 가새가 인장항복하고 압축좌굴 할 때 보와 기둥은 탄성상태를 유지해야 한다. 중심가새골조의 대표적 형식인 역V형 가새골조의 경우 가새가 좌굴하면 인장가새와 압축가새 사이에 수직불균형력이 발생하여 보와 기둥에 추가적인 하중이 가해지므로 이를 반영하여 보 및 기둥 부재를 탄성설계해야 한다. 지진하중 발생시에 모든 가새가 동시에 좌굴하지 않는다는 것은 잘 알려져 있지만, 특정층의 좌굴발생 유무를 정확히 예견하는 방법은 아직 존재하지 않는다. 따라서 현행 설계기준에서는 모든 층에서의 동시 좌굴을 가정하여 보수적으로 설계하거나 시스템초과강도계수로 증폭된 특별지진하중에 대해 기둥부재를 탄성설계하는 경험적이고 우회적인 방법을 제시하고 있다. 이를 개선하기 위한 첫 번째 단계는 우선 지진 내습시에 좌굴발생이 예견되는 층을 정확히 예측하는 것이다. 본 논문에서는 1차모드 푸쉬오버해석, 고차모드 푸쉬오버해석, 선형고유치해석에 의해 좌굴층을 예측한 후 이를 토대로 가새좌굴이 기둥에 가하는 축력을 산정하는 세 가지의 새로운 방법, 즉 FMPM(First Mode Pushover Method), MMPM (Multi-Mode Pushover Method), MSBM(Mode Shape Based Method)을 제안하였다. 이 세 가지 방안의 핵심은 좌굴 포텐셜이 높은 것으로 감지된 층의 수직불균형력은 선형합산하고 그렇지 않은 층의 수직불균형력은 SRSS(square root of sum of squares)법에 의해 조합하여 기둥에 가해지는 축력을 산정하는 것이다. 3층에서 15층에 이르는 5개의 골조모델에 대해 20개 지진가속도기록을 입력으로 한 방대한 비선형동적해석을 수행하여 제시한 방안의 타탕성을 검증하였다. 세 방법에 의한 기둥설계 결과는 모두 현행 설계기준의 방법보다 기둥의 물량을 대폭 줄이면서도 기둥부재가 탄성상태를 유지하여 역량설계법의 철학을 만족시켰다. 특히 MSBM은 간단한 선형 고유치해석결과만을 이용하지만 본 연구에서 가장 정확한 축력산정법인 MMPM과 큰 차이를 보이지 않을 정도로 정확하다. 실무 여건에서도 사용 가능한 방법으로 MSBM을 추천한다.

가우시안 군집분석을 이용한 천리안 위성의 대기운동벡터 표적추적 알고리듬 개발 및 분석 (Development and Analysis of COMS AMV Target Tracking Algorithm using Gaussian Cluster Analysis)

  • 오유림;김재환;박형민;백강현
    • 대한원격탐사학회지
    • /
    • 제31권6호
    • /
    • pp.531-548
    • /
    • 2015
  • 위성영상을 이용하여 산출된 대기운동벡터(AMV)와 라디오존데 바람 관측 자료를 이용한 검증결과는 산출된 AMV가 지속적으로 관측 자료에 비해서 풍속이 약하게 나타나는 Slow Speed Bias(SSB)를 보여 주었다. 이러한 SSB는 표적추적, 표적선정, 그리고 고도할당 단계의 오차에 의해 야기될 수 있으며, 이 중 고도할당 단계의 오차는 SSB를 발생시키는 주된 요인으로 여겨진다. 그러나 최근 연구에서는 고도할당 단계의 개선만으로는 SSB 문제를 해결하는데 한계가 있음을 밝혔다. 그러므로 본 연구에서는 새로운 표적추적 알고리듬을 개발하여 SSB를 감소시킴으로서 기상청 현업 AMV 알고리듬의 성능을 개선하고자 하였다. 표적추적 단계의 오차는 표적 내에 다양한 시 공간 규모의 바람이 포함되어 벡터가 과도하게 평균된 움직임으로 계산되거나, 구름이 추적 시간동안 형태를 유지하지 못하고 변형되는 경우에 발생한다. 이러한 문제를 해결하기 위해 개발된 표적추적 알고리듬에서는 가우시안 군집분석(GMM)을 이용하여 변형이 적고 추적에 용이한 저온 군집을 표적으로 재선정하고, 이미지를 변형시켜 군집의 움직임을 보다 쉽게 추적할 수 있게 하였다. 또한 표적을 추적하기 위한 방법으로 거리제곱합 방법을 사용하였다. 개발된 알고리듬과 기존 COMS 알고리듬을 천리안 위성의 적외채널 영상에 적용하여 AMV를 산출하였으며, 이를 라디오존데 관측 자료와 비교 검증해 보았다. 제안된 알고리듬으로 산출된 AMV는 기존 알고리듬으로 산출된 AMV보다 평균 풍속이 $2.7ms^{-1}$증가함에 따라 SSB가 평균 29%까지 감소하는 개선된 결과를 보여주었다. 그러나 개발된 알고리듬으로 산출된 AMV는 중 하층의 정확도가 감소하였고, 기존 알고리듬에 비해 산출되는 AMV 벡터수가 약 40%까지 감소함을 보였다. 이에 따라 중 하층의 정확도 개선과 기존의 알고리듬과 비교하여 산출되는 벡터 개수가 감소하는 문제를 보완하기 위한 연구가 필요할 것으로 판단된다.

시계열 고해상도 항공영상을 이용한 소나무재선충병 감염목 탐지 - 강원대학교 학술림 일원을 대상으로 - (Detection of Pine Wilt Disease tree Using High Resolution Aerial Photographs - A Case Study of Kangwon National University Research Forest -)

  • 박정묵;최인규;이정수
    • 한국지리정보학회지
    • /
    • 제22권2호
    • /
    • pp.36-49
    • /
    • 2019
  • 본 연구는 강원대학교 학술림을 대상으로 현장조사 기반(Field Survey Based)에 의한 감염목(FSB_감염목)과 객체분류기반(Object Classification Based)에 의한 감염목(OCB_감염목)을 추출하고 감염목에 대한 공간적 분포특성 및 발생강도 평가를 목적으로 하였다. OCB 최적 가중치는 Scale 11, Shape 0.1, Color 0.9, Compactness 0.9, Smoothness 0.1로 선정되었으며, 전체 분류정확도는 약 94%, Kappa 계수는 0.88로 매우 높았다. OCB_감염목 지역은 약 2.4ha로 전체 면적의 약 0.05% 발생하였다. OCB_감염목와 FSB_감염목의 임분구조 분포특성 및 지형 지리적 요인을 비교 하면, OCB_감염목 영급은 IV영급의 분포비율이 약 44%로 가장 높았으며, FSB_감염목의 영급도 IV영급의 분포비율이 약 55%로 가장 높았다. OCB_감염목의 IV영급 비율은 FSB_감염목보다 약 11% 낮았다. OCB_감염목 경급은 소경목과 중경목이 약 93%로 대부분을 차지한 반면, FSB_감염목 경급은 중경목과 대경목이 약 87%로 전체 대상지의 경급 분포와 상이하였다. 한편, OCB_감염목 표고 분포비율은 401-500m에서 약 30%로 가장 높은 반면, FSB_감염목은 301-400m에서 약 45%로 상이하였으며, 임도로부터 접근성 분포 비율은 OCB_감염목과 FSB_감염목 모두 100m이하에서 각각 약 24%와 31%로 가장 높아 임도로부터 접근성이 높을수록 감염목이 높았다. OCB_감염목 핫스팟은 31임반과 32임반으로 영급과 경급이 높은 지역에서 높게 분포하였다.

치과용 모형 스캐너의 지대치 중첩 과정이 최종 가상 모형에 미치는 영향 (Effect of abutment superimposition process of dental model scanner on final virtual model)

  • 유범영;손큰바다;이규복
    • 대한치과보철학회지
    • /
    • 제57권3호
    • /
    • pp.203-210
    • /
    • 2019
  • 목적: 본 연구는 치과용 모형 스캐너를 이용하여 단일 전장관과 3본 고정성의치 모형을 스캔하는 과정에서 지대치의 중첩 과정이 최종 가상 모형에 미치는 영향을 알아보려 하였다. 재료 및 방법: 평가를 위해 단일 전장관과 3본 고정성의치를 위한 석고 모형을 제작하였다. 그리고 Pindex system을 이용하여 핀 작업된 모형을 제작하였다. 기준 스캔 데이터(CAD Reference Model)와 실험 스캔 데이터(CAD Test Model)를 획득하기 위해서 치과용 모형 스캐너(E1, 3Shape A/S, Copenhagen, Denmark)를 이용했다. 기준 스캔 데이터는 지대치를 분할한 후 탈착하지 않고 스캔하였다. 그리고 실험 스캔 데이터는 분할된 지대치를 분리하여 스캔 후, 기준 스캔 데이터에 중첩되었다(n = 20). 마지막으로 3차원 검사 소프트웨어(release 2018.0.0; Geomagic control X; 3D Systems)를 이용하여 root mean square (RMS)를 분석하였고, 통계 분석은 Mann-Whitney U test를 사용하였다 (${\alpha}=.05$). 결과: 단일 전장관 지대치의 RMS 평균은 $10.93{\mu}m$, 3본 고정성의치 지대치의 RMS 평균은 $6.9{\mu}m$가 나왔다. 두 그룹의 RMS 평균값은 통계적으로 유의한 차이를 보여줬다 (P < .001). 또한 두 그룹의 양(positive)과 음(negative)의 오류는 단일 전장관 지대치는 $9.83{\mu}m$, $-6.79{\mu}m$, 3본 고정성의치 지대치는 $6.22{\mu}m$, $-3.3{\mu}m$의 평균값이 나왔다. 두 그룹의 양과 음의 오류 평균값은 통계적으로 모두 3본 고정성의치 지대치가 단일 전장관 지대치보다 통계적으로 유의하게 낮은 값을 보여주었다 (P < .001). 결론: 핀 작업된 모형의 스캔 과정에서 지대치의 개수가 증가하여도 지대치의 중첩에 의한 오류는 증가하지 않았다. 또한 단일 전장관 지대치에서 유의하게 높은 오류를 보였지만 임상적으로 허용 가능한 스캔 정확도의 범위에 있다.

SNS 사진과 사진측량을 이용한 정원유산의 3차원 형상 재현 가능성 연구 - 명승 제40호 담양 소쇄원(潭陽 瀟灑園)을 대상으로 - (A Study on the Reproducibility of 3D Shape Model of Garden Cultural Heritage using Photogrammetry with SNS Photographs - Focused on Soswaewon Garden, Damyang(Scenic Site No.40) -)

  • 김충식;이상하
    • 한국전통조경학회지
    • /
    • 제36권4호
    • /
    • pp.94-104
    • /
    • 2018
  • 본 연구는 사진측량 기술을 과거의 촬영된 사진들에 활용하여 정원유산의 원형 재현 가능성을 검토하였다. 인공물과 자연물이 혼재되어 입체 형상 재현 가능성 검토에 적합한 담양 소쇄원(명승 제40호)을 연구 대상으로 하였다. 소쇄원에서 근거리와 원거리의 $360^{\circ}$ 전방향에서 장애물이 없어 촬영이 가능한 조경시설물인 매대(梅臺), 애양단(愛陽壇), 오곡문(五曲門) 담장, 약작(略?)과 자연경물인 광석(廣石) 5개 조경요소를 선정하였다. 인터넷 포털에서 5개 조경요소에 대해 촬영날짜, 초점길이, 노출 등의 정보가 포함된 151장의 사진을 수집하여 촬영구도를 분석하였다. 수집된 사진들은 요소별로 특정한 구도에서 집중적으로 촬영되는 경향을 발견하였다. 또한 조경요소별로 이용자들이 선호하는 2~3개의 촬영구도가 있음을 발견하였다. 조경요소별로 빈도가 높은 촬영구도 1개를 선정하고 그 구도에서 촬영된 사진들을 이용하여 포토스캔(Photoscan) 프로그램으로 3D 메쉬 모델을 제작하여 입체 형상의 재현 가능성을 분석하였다. 제작결과 오곡문 담장, 매대, 애양단과 같은 인공물은 비교적 입체 형상의 재현이 가능하였으나, 질감이 동일하거나 자연 경물인 약작과 광석은 입체 형상의 재현이 불가능했다. 선정된 촬영구도와 유사하게 현장에서 촬영한 사진으로 입체 형상의 재현을 실험한 결과 수집사진에서 불가능했던 약작과 광석에서 3D 메쉬 모델이 제작되었다. 또한 과거와 현재의 형상 비교를 통해 정확한 크기를 측정할 수 있고 변화를 발견할 수 있었다. 문화재의 관람객이나 조경가 등에 의해 촬영된 과거의 사진들을 확보하게 된다면 그 당시에 입체 형상을 재현할 수 있을 것으로 보인다. 이러한 기술이 확산된다면 정원유산의 과거 형상을 추정하고 변화를 고찰하는데 정확성과 신뢰성을 높일 것이다.

LiF:Mg,Cu,P 열형광선량계의 선량특성을 이용한 눈가림법에 의한 출력선량 평가 (Evaluation the Output Dose of Linear Accelerator Photon Beams by Blind Test with Dose Characteristics of LiF:Mg,Cu,P TLD)

  • 최태진;이호준;예지원;오영기;김진희;김옥배
    • 한국의학물리학회지:의학물리
    • /
    • 제20권4호
    • /
    • pp.308-316
    • /
    • 2009
  • 조사면의 크기와 한계 측정부위의 선량평가에는 형체가 자유로운 열형광분말체를 이용하는 것이 적합함을 뒷받침하기 위하여 LiF:Mg,Cu,P TLD 분말체의 선량특성을 조사하고, 작성된 평가 알고리즘에 따라 선형가속기의 출력선량을 눈가림법으로 조사한 TLD에 적용했을 때 평가 신뢰성을 확인하고자 한다. 열형광분말소자는 PTW 사의 LiF:Mg,Cu,P (200 Mesh)이며, 판독기는 LTM (LTM Co, France)이다. 물의 흡수선량은 전리함과 전위계를 표준선량평가기관에서 교정한 흡수선량계수를 사용하여 구하였으며, TLD 조사는 자체 제작한 미니 프라스틱 수조의 중앙에 삽입하여 조사면 $10{\times}10\;cm^2$로 시행 하였다. 방사선조사는 두 대학병원에 설치된 선형가속기(Oncor, Siemens와 Clinac Ix, Varian)의 6 MV 광자선으로 하였으며, TLD의 눈가림법 선량평가는 glow 곡선의 특성과 분말질량에 의한 감도변화, 선량률의존성, 선량-TL 강도의 비례성과 퇴행성 조사를 통해 시행되었다. LiF:Mg,Cu,P TLD는 3개의 glow peak를 보였고 232도에 나타나는 peak는 선량과 비례성이 높고 감도가 높으며 퇴행현상이 적어 선량계로써 좋은 조건을 보이고 있다. 열형광선량분말체는 1,000 cGy까지 대략적인 선형관계를 유지하였으나, 정밀 측정평가를 위해 비선형 함수를 통해 평균 1% 오차범위에서 평가할 수 있었다. LiF:Mg,Cu,P TLD는 선량률 22.2 cGy/min에서 600 cGy/min까지 TL 감도에 거의 영향을 주지 않았으나, 가열판(Planchette)의 분말체의 량에 따라서는 TL 감도에 변화가 있음을 확인하였다. 눈가림법으로 두 기관의 선형가속기에서 15회와 10회 조사하였고, 선량범위는 15~800 cGy였다. 눈가림법에 의한 양 기관의 TL 선량은 평균 1% 이하의 오차범위에서 일치하고 편차는 각각 ${\pm}1.9%$${\pm}2.58$ 이내에 있었다. 열형광분말소자를 사용하여 눈가림법으로 출력선량을 평가한 결과 실험오차범위에서 표준전리함의 선량과 잘 일치하였으며, 전리함으로 접근할 수 없는 작은 조사면이나 경계성 조사면에 대한 선량평가에 신뢰성 있는 평가를 할 수 있을 것으로 생각한다.

  • PDF

세기조절방사선치료(IMRT)의 Commissioning 및 정도관리: AAPM TG119 적용 (Intensity Modulated Radiation Therapy Commissioning and Quality Assurance: Implementation of AAPM TG119)

  • 안우상;조병철
    • 한국의학물리학회지:의학물리
    • /
    • 제22권2호
    • /
    • pp.99-105
    • /
    • 2011
  • 본 연구에서는 미국의학물리학회(AAPM)에서 제안된 세기조절방사선치료(IMRT)의 commissioning 및 정도관리를 위해 제안된 일련의 시험을 통해 본원의 세기조절방사선치료의 정확도를 평가하고 정도관리 절차를 수립하고자 하였다. TG119에 제시된 5가지 세기조절방사선치료의 표적체적: multi-target, 두경부, 전립선, 및 두 가지의 C-shape (easy&hard)을 대상으로 CT 스캔된 팬텀을 이용하여 치료계획시스템에서 IMRT 치료계획을 수행하였다. 얻어진 치료계획을 dynamic sliding window 전달방식으로 팬텀에 조사하였다. 절대 선량은 표적 및 위험장기 부위에 이온 전리함(CC13, IBA)을 이용하여 측정하고, 2차원 상대 선량분포는 EBT2 필름을 사용하여 측정하였다. 측정된 값들은 해당하는 치료계획시스템 계산값과 비교하여 오차의 평균 및 표준편차를 구하였다. 이를 바탕으로 TG119에 제시된 신뢰구간을 계산하여 제시된 값과 비교하였다. 이온 전리함을 이용한 측정 결과에서 표적 및 위험장기에 대한 계산값과 측정값 사이의 평균오차는 각각 $1.2{\pm}1.1%$$1.2{\pm}0.7%$이었고, 95% 신뢰구간은 각각 3.4%와 2.6%으로 TG119에서 제시하고 있는 4.5%와 4.7% 이내에 있었다. 필름을 이용한 측정 결과에서는 허용기준 3%/3 mm를 통과하는 감마인덱스는 평균$ 97.7{\pm}0.8%$로 95% 신뢰구간은 3.9%로 TG119에서 제시하고 있는 7.0% 이내에 있었다. 따라서 TG119에서 제시된 일련의 표준화된 시험을 통해 본원의 세기조절방사선치료의 commissioning 및 정도관리를 평가할 수 있었다. 이온 전리함을 이용한 절대 선량에 대한 action level은 표적과 위험장기에서 각각 ${\pm}4%$${\pm}3%$로, EBT2 필름을 이용한 2차원 상대선량분포는 허용기준 3%/3 mm 기준으로 감마인덱스 1이하를 통과하는 비율이 96%로 정할 수 있었다. 이를 통해 TG119에서 제시된 일련의 표준화된 시험을 통해 각 기관의 IMRT 정확도 평가에 대한 객관적인 지표로 이용될 수 있을 것으로 기대된다.

다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형 (The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM)

  • 박지영;홍태호
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.

상악동 아래벽과 상악 대구치 치근사이 위치관계에 관한 방사선학적 연구 (A Radiologic Study of the Relationship of the Maxillary Sinus Floor and Apex of the Maxillary Molar)

  • 윤혜림;박창서
    • 치과방사선
    • /
    • 제28권1호
    • /
    • pp.111-126
    • /
    • 1998
  • In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA/sup (R)/ in male and female adults in their 20's on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop. and postop. root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied using panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows: 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the actual maxilla specimen were 2.83 mm, 4.51mm, and 4.l5mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5% of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography. 3. In cross-sectional view, when the vertical relationship of the maxillary sinus floor and maxillary roots was assessed, in 1st molars, type II (the sinus floor that extends down to the buccolingual furcation area) was predominant, while in 2nd molars, type I (the sinus floor located above the level connecting the buccal and lingual apices) was predominant. In the horizontal relationship, in 1st molars, type II (the lowest floor of the maxillary sinus located in between the buccal and lingual roots) was predominant; in 2nd molars, type I (the lowest floor of the maxillary sinus located on the buccal side of the buccal roots) and type II appeared in similar frequency. In conclusion, the SCANORA/sup (R)/ cross-sectional tomography was more effective than the frequently used panoramic view, in that the relationship of the maxillary molars and maxillary sinus floor can be evaluated more accurately and the buccolingual cross-sectional view can also be observed. And maxillary sinus floor that was close to maxillary 2nd molar had tendency to be located on buccal side than that close to 1st molar. Therefore, cross-sectional tomography is an effective and accurate method to evaluate the position of the teeth in relation to the sinus floor preoperative and can be easily used to diagnose localized periapical lesions. Also, the image quality obtained was quite satisfactory.

  • PDF

전산화 치료계획의 CT/MRI 영상 융합 시 PLANNING MRI영상 획득의 유용성 평가 (USABILITY EVALUATION OF PLANNING MRI ACQUISITION WHEN CT/MRI FUSION OF COMPUTERIZED TREATMENT PLAN)

  • 박도근;최병기;김진만;이동훈;송기원;박영환
    • 대한방사선치료학회지
    • /
    • 제26권1호
    • /
    • pp.127-135
    • /
    • 2014
  • 목 적 : 전립선 암의 방사선 치료 시 컴퓨터 단층촬영 영상만을 이용하여 타겟 및 정상장기의 체적을 정의하기에는 제약성이 따른다. 이러한 제약성을 보완해주기 위하여 연부조직 대조도가 우수한 자기공명영상 장치가 사용되고 있다. 그러나 부정확한 CT/MRI 영상의 융합은 정확한 타겟 설정에 불확실성이 따르게 되며 정상장기의 불필요한 선량이 입사되어 부작용을 초래 할 수 있다. 이러한 불확실성을 줄이기 위해 본원에서는 CT/MRI영상 융합 시 모의 치료 과정과 동일한 고정용구와 자세로 환자를 셋업하여 MRI(Planning MRI)영상을 획득하고 있으며, 본 연구에서는 진단용 MRI영상과 Planning MRI영상을 비교 분석하여 Planning MRI의 유용성을 평가하고자 한다. 대상 및 방법 : 본원에서 2011년 8월부터 2013년 7월까지 전립선 암으로 진단을 받고 Non-hormone, Definitive RT 70 Gy/28 fx을 처방받은 10명의 환자를 대상으로 하였다. 모의 치료 후 30분 뒤에 MRI영상을 획득하였으며, 획득 된 CT/MRI영상은 뼈를 중심으로 Philips pinnacle v9.2를 이용하여 융합하였다. 전립선 Balloon tube의 유무에 따른 전립선의 변화를 측정하기 위하여 Planning MRI, 진단용 MRI영상에서의 전립선 체적을 측정 비교하였으며, 각각의 영상에서 전립선의 모양의 변화를 측정하기 위해 전립선의 중심에서 상하, 앞뒤, 좌우방향에서의 직경을 측정 비교하였다. 결 과 : Planning MRI, 진단용 MRI영상에서의 전립선 체적을 비교한 결과 각각 평균 $25.01cm^3$(범위 $15.84-34.75cm^3$), $25.05cm^3$(범위 $15.28-35.88cm^3$)의 결과를 얻었다. Planning MRI 대비 진단용 MRI는 0.12 % 증가로 그 차이는 크지 않다는 것을 알 수가 있었다. 하지만 Planning MRI를 기준으로 Transition zone 방향으로 총 $7.46cm^3$(29 %) 체적의 증가가 있었으며, Peripheral zone 방향으로 $8.52cm^3$(34 %)의 체적 감소가 있었다. 전립선 중심의 2차원 영상에서의 상하, 앞뒤, 좌우방향의 직경을 측정한 결과 Planning MRI에서 평균 3.82cm, 2.38cm, 4.59cm의 값을 나타냈으며, 진단용 MRI에서는 평균 3.37cm, 2.76cm, 4.51cm의 값을 알 수 있었다. Planning MRI 기준으로 앞뒤 방향으로 0.38cm(13 %)감소하였으나 좌우 방향 0.08cm(1.6 %), 상하방향 0.45cm(13 %)가 증가되었다. 결 론 : 본 연구의 결과를 바탕으로 Planning MRI와 진단용 MRI에서의 전립선의 총 체적은 큰 차이를 보이지 않았지만 직장에 전립선 Balloon tube 삽입으로 인한 전립선의 모양 및 부분 체적의 변화를 알 수가 있었다. 따라서 CT/MRI 영상 융합 시 Planning MRI영상을 이용한다면 진단용 MRI영상과 비교하여 Transition zone에 증가하는 체적만큼 손실 없이 타겟을 CTV에 포함시킬 수 있으며, Balloon으로 인한 Peripheral zone 체적의 감소를 더 명확히 구분하여 직장에 전달되는 방사선량을 줄일 수 있을 것이다. 이에 본 저자는 전산화 치료 계획에서의 CT/MRI영상 융합 시 모의 치료 과정과 동일한 고정용구와 자세를 재현하여 MRI영상을 획득하는 것이 유용할 것이라 사료된다.