• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.827-834
• /
• 2014

In order to meet the low voltage ride-through requirement in a grid code, a wind power plant (WPP) has to stay connected to a grid, supporting the voltage recovery for a grid fault. To do this, a plant-level controller as well as a wind generator (WG) controller is essential. The dynamic response of a WPP should be analyzed in order to design a plant-level controller. The dynamic response of a WPP for a grid fault is the collective response of all WGs, which depends on the wind speed approaching the WG. Thus, the dynamic response of a WPP should be analyzed by taking the wake effect into consideration, because different wind speeds at WGs will result in different responses of the WPP. This paper analyzes the response of a doubly fed induction generator (DFIG)-based offshore WPP with a grid fault taking into account the wake effect. To obtain the approaching wind speed of a WG in a WPP, we considered the cumulative impact of multiple shadowing and the effect of the wind direction. The voltage, reactive power, and active power at the point of common coupling of a 100 MW DFIG-based offshore WPP were analyzed during and after a grid fault under various wind and fault conditions using an EMTP-RV simulator. The results clearly demonstrate that not considering the wake effect leads to significantly different results, particularly for the reactive power and active power, which could potentially lead to incorrect conclusions and / or control schemes for a WPP.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.246-251
• /
• 2013

Screen printing is commonly used to form the front/back electrodes in silicon solar cell. But it has caused high resistance and low aspect ratio, resulting in decreased conversion efficiency in solar cell. Recently the plating method has been combined with screen-printed c-Si solar cell to reduce the resistance and improve the aspect ratio. In this paper, we investigated the effect of light induced silver plating with screen-printed c-Si solar cells and compared their electrical properties. All wafers were textured, doped, and coated with anti-reflection layer. The metallization process was carried out with screen-printing, followed by co-fired. Then we performed light induced Ag plating by changing the plating time in the range of 20 sec~5min with/without external light. For comparison, we measured the light I-V characteristics and electrode width by optical microscope. During plating, silver ions fill the porous structure established in rapid silver particle sintering during co-firing step, which results in resistance decrease and efficiency improvement. The plating rate was increased in presence of light lamp, resulting in widening the electrode with and reducing the short-circuit current by shadowing loss. With the optimized plating condition, the conversion efficiency of solar cells was increased by 0.4% due to decreased series resistance. Finally we obtained the short-circuit current of 8.66 A, open-circuit voltage of 0.632 V, fill factor of 78.2%, and efficiency of 17.8% on a silicon solar cell.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.90-99
• /
• 2023

In this paper, we propose a super resolution network for raw sensor image which data size is lower comparatively to RGB image. But the actual capabilities of raw image super resolution depends on color correction because its absent of camera post processing that leads to unintended result having different white balance, saturation, etc. Thus, we introduce novel color corrector attention network by adopting the idea of precedent raw super resolution research, and tune to the our faced problem from data specification. The result is not superior to former researches but shows decent output on certain performance matrix. In the same time, we encounter new challenging problem of unexpected shadowing artifact around image objects that cause performance declination despite its good result overall. This problem remains a task to be solved in the future research.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.93-106
• /
• 2008

Domestic construction industry that accounts for nearly 17.5 percent of GDP is one of the major industries that has been leading domestic economy development. However, accumulated negative image such as corruption, fraudulent work and 3D industries shadowing the remarkable achievement is rampant. In order to improve the image for construction industry, this research investigated various cases and activities related to the image enhancement. Cases analyzed include activities of National Center for Construction Education and Research (NCCER) and Construction Industry Training Board (CITB) such as 'Build Your Future', 'Construct My Future', 'Positive Image 2004', and so on. Based on the analysis results, a strategic framework to improve the image of Korean construction industry was proposed. It is envisioned that improved image of the industry will positively affect the growth of the construction industry by attracting more qualified human resources.

• Design Convergence Study
• /
• v.13 no.5
• /
• pp.131-145
• /
• 2014

Considering the number of population commuting from Gyeonggi to Seoul, the development of the bus system is relatively slow. There are many problems to be solved but it has been overlooked, leaving the users in discomfort. The goal of this research is to improve the current system to satisfy the unmet needs, using HCI methods, which is composed of five steps, including Define, Find, Analyze & Synthesize, Ideation, Develop. In Define, we recruited the interviewees using the extreme user method to find their needs. In Find, we proceeded 'be the customer', shadowing for background research and in-depth interview. In Analyze & Synthesis, we analyzed the customer needs and clustered to similar needs to draw useful ideas. After that we suggested sophisticated ideas based on design principles from previous stage and visualized in user scenarios and mock-ups. Overall, the research suggests with text message service, informative light service and mobile application to improve the existing bus station.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.147-154
• /
• 2023

In this paper, we propose a barrier-free course route navigation service named "Theme Road" aimed at improving the mobility and convenience for elderly electric wheelchair users with walking disabilities. To achieve this goal, we conducted a user survey through shadowing and in-depth interviews to gather insights on the challenges experienced by elderly electric wheelchair users. We identified potential solutions for each inconvenience through co-creation workshops, resulting in a set of design considerations and app functionalities. Using persona development and service scenarios, we designed and implemented the "Theme Road" service as a dedicated navigation application for barrier-free course navigation. Unlike conventional route navigation and mapping services, our study stands out by offering a unique approach that combines recommended destinations and safe routes based on experiential analysis from elderly electric wheelchair users.

• Korean Journal of Radiology
• /
• v.21 no.5
• /
• pp.605-613
• /
• 2020

Objective: To determine the malignancy risk of isolated macrocalcifications (a calcified nodule with complete posterior acoustic shadowing) detected on ultrasonography (US) and to evaluate the postoperative American Thyroid Association (ATA) risk stratification of malignant tumors manifesting as isolated macrocalcifications. Materials and Methods: A total of 3852 thyroid nodules (≥ 1 cm) of 3061 consecutive patients who had undergone biopsy between January 2011 and June 2018 were included in this study. We assessed the prevalence, malignancy rate, and size distribution of isolated macrocalcifications and evaluated the histopathologic features and postoperative ATA risk stratification of malignant tumors manifesting as isolated macrocalcifications. Results: Isolated macrocalcifications were found in 38 (1.2%) of the 3061 patients. Final diagnosis was established in 30 (78.9%) nodules; seven malignant tumors were diagnosed as papillary thyroid carcinomas (PTCs). The malignancy rate of the isolated macrocalcifications was 23.3% in the 30 nodules with final diagnoses and 18.4% in all nodules. Among the six surgically-treated malignant tumors, five (83.3%) had an extrathyroidal extension (ETE) (minor ETE 1, gross ETE 4), and two (33.3%) had macroscopic lymph node metastasis. Four (66.7%) malignant tumors were categorized as high-risk tumors, one as an intermediate-risk tumor, and one as a low-risk tumor using the ATA risk stratification. Histopathologically, out of the six malignant tumors, ossifications were noted in four (66.7%) and predominant calcifications in two (33.3%). Conclusion: The US pattern of isolated macrocalcifications (≥ 1 cm) showed an intermediate malignancy risk (at least 18.4%). All malignant tumors were PTCs, and most showed an aggressive behavior and a high or intermediate postoperative ATA risk.

• Journal of the Korean Society of Radiology
• /
• v.81 no.5
• /
• pp.1266-1271
• /
• 2020

We report herein a 46-year-old woman who presented with mucinous breast carcinoma that appeared as a coarse and densely calcified mass on mammography. The lesion was a 4.6-cm-sized palpable, hyperechoic, calcified mass with posterior shadowing on ultrasonography. This finding is a unique feature of mucinous breast carcinoma and is also observed in unusual breast cancer variants such as metaplastic breast cancer with chondroid differentiation, extraosseous osteosarcoma, and breast chondrosarcoma. The lesion showed a slow-growing pattern throughout the 4-year observation period. Mammography performed 4 years ago revealed faint, grouped microcalcifications; the lesion increased in size over 2 years, presenting as a well-circumscribed, calcified mass, mimicking dystrophic calcification. As several unusual variants of breast cancer, including mucinous carcinoma, may present as coarse and densely calcified masses on mammography, immediate biopsy should be considered when they are observed.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.1 no.1
• /
• pp.100-106
• /
• 1998

Purpose: Ceftriaxone, a potent parenteral third-generation semisynthetic cephalosporin is widely used for the treatment of a variety of bacterial infections in both children and adult. Review of recent data indicates that ceftriaxone treatment has been associated with the development of reversible biliary pseudolithiasis and that is thought by many to be a benign process. Despite, several reports describe patients with ceftriaxone pseudolithiasis who required cholecystectomy for presumed acute cholecystitis. In this study we evaluated the incidence, risk factors, and prognosis of gallbladder pseudolithiasis after ceftriaxone treatment. Methods: Between march, 1997 and January, 1998, any child admitted to the Children's hospital of National University of Seoul and prescribed ceftriaxone for probable or definite bacterial infection were eligible for the study. 21 of them had ultrasound examination on the 2~12 days later after the start of ceftriaxone treatment, 8 of whom documented gallbladder precipitates or pseudolithiasis during treatment by serial abdominal ultrasound. Repeat abdominal ultrasound was performed 10~80 days later after the end of ceftriaxone treatment. The children with underlying liver disease or decreased renal function were excluded in this study. Results: 1) 21 children had ultrasound examinations of gallbladder during ceftriaxone treatment and 8 (38%) of them acquired pseudolithiasis. 2) The patients who developed gallbladder pseudolithiasis were significantly older ($6.3{\pm}2.9$ yr. vs $2.2{\pm}3.1$ yr.)(p<0.05), and older than 24 months were probably the significant risk associated with this phenomenon (p<0.05). However, no significant differences in sex, type of infection, fasting, and ceftriaxone treatment regimen (dose, duration of therapy). 3) The abnormality found on gallbladder ultrasonography was a strikingly hyperechogenic material with post-acoustic shadowing in 5 patients without post-acoustic shadowing in 3 patients 4) Follow up of gallbladder ultrasound was performed in 6 patients after cessation of ceftriaxone treatment. Sonographic abnormalities completely resolved within 14 days post cessation of therapy in 2 patients; 30 days, 1 patient; 80 days, 3 patients. Conclusions: We suggest that routine abdominal ultrasound should be considered in all children who received high dose ceftriaxone in more than 24 months of age and developed hepatobiliary symptoms during or just after ceftriaxone treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.198-198
• /
• 2015

전기변색재료는 전압을 인가하였을 때 전계방향에 따라 가역적으로 색이 변화하는 재료를 말한다. 스마트윈도우용 전기 변색재료는 지속적으로 전기를 가해줄 필요 없이 한번 변색되면 색이 지속되는 특징을 가지므로 에너지 효율적으로 우수하여 태양열 차단 창호나 디스플레이 분야에 응용될 것으로 기대된다. 이러한 전기 변색재료에는 산화형 전기 변색 재료, 환원형 전기 변색 재료가 있는데 이중 가장 널리 연구되고 있는 재료는 환원형 전기변색재료이다. 대표적인 재료로 $WO_3$가 쓰이는 데 이는 전기 변색적 특성이 우수하고 또한 내구성이 다른 재료에 비해 우수하다는 장점 때문이다. 그러나, 상용화를 위해서는 내구성의 개선이 요구되고 있다. 한편, $TiO_2$는 안정성이 매우 뛰어나지만 전기변색적 특성이 $WO_3$에 비해 낮은 점이 지적되고 있다. 이러한 $WO_3$ 및 $TiO_2$ 박막은 스퍼터링 또는 sol-gel법 등으로 제작되고 있는데, 일반적으로 스퍼터링의 경우 치밀한 박막이 형성되기 때문에 Porous 한 박막을 얻기 힘들다. 따라서 본 연구에서는 기판에 입사하는 스퍼터 입자들의 각도를 조절하여 shadowing 효과로 인해 박막의 구조가 porous해지는 Glancing angle deposition을 도입하였다. 이러한 증착법을 이용하여 $WO_3$와 $TiO_2$를 각도를 조절하여 증착하고 $TiO_2$와 $WO_3$ 박막의 특성을 비교하여 본다. 두께 300 nm를 가지는 $WO_3$ 및 $TiO_2$ 박막은 GLAD RF 마그네트론 스퍼터링법을 이용하여 Corning glass(corning E-2000)기판 위에 증착하였다. 기판 입사 각도는 $0^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$로 증착하였고 직경 3 in의 $TiO_2$, $WO_3$ 타겟을 사용하였다. 또한 스퍼터링 파워는 400 W, 작업압력 1.0 Pa, 그리고 스퍼터링 가스는 O2/Ar+O2 유량 10%에서 30%로 증착을 상온에서 진행하였다. 전기화학적 특성을 평가하기 위하여 $TiO_2$ 및 $WO_3$ 박막을 100 nm 두께의 ITO/glass 위에서 증착하였다. 박막의 미세구조는 XRD와 SEM을 통해 확인하였고, 전기화학적 특성은 Ar 분위기의 Glove box안에서 parstat 2273을 통해 측정하였다. 전해질은 1 M $LiPF_6/PC$로 진행하였고, 대향 전극는 Pt전극을, 참고 전극은 칼로멜 전극을 사용하였다. Potential 범위는 2 V에서 4 V로 진행하였고, scan rate는 50 mV/s로 측정하였다. 투과도는 UV/VIS spectrometer로 측정하였다. 전기변색 특성의 상관관계 및 에 대해서는 학회 당일 발표할 예정이다.