• Architectural research
• /
• 제22권2호
• /
• pp.41-52
• /
• 2020

Laboratory buildings with specialized equipment and ventilation systems pose challenges in terms of efficient energy use and initial construction costs. Additionally, lab spaces should have flexible and efficient layouts and provide a comfortable indoor research environment. Therefore, this study aims to identify the correlation between the facade of a building and its interior layout from case studies of energy-efficient research labs and to propose passive energy design strategies for the establishment of an optimal research environment. The case studies in this paper were selected from the American Institute of Architects Committee on the Environment Top Ten Projects and Leadership in Energy and Environmental Design (LEED) certified research lab projects. In this paper, the passive design strategies of space zoning, façade design devices to control heating and cooling loads were analyzed. Additionally, the relationships between these strategies and the interior lab layouts, lab support spaces, offices, and circulation areas were examined. The following four conclusions were drawn from the analysis of various cases: 1) space zoning for grouping areas with similar energy requirements is performed to concentrate similar heating and cooling demands to simplify the HVAC loads. 2) Public areas such as corridor, atrium, or courtyard can serve as buffer zones that employ passive solar design to minimize the mechanical energy load. 3) A balanced window-to-wall ratio (WWR), exterior shading devices, and natural ventilation systems are applied according to the space programming energy requirements to minimize the dependence on mechanical service. 4) Lastly, typical laboratory space zoning categories can be revised, reversed, and even reconfigured to minimize the energy load and adjust to the site context. This study can provide deep insights into various design strategies employed for construction of green laboratories along with intuitive arrangement of various building components such as laboratory spaces, lab support spaces, office spaces, and common public areas. The key findings of this study can contribute towards creating improved designs of laboratory facilities with reduced carbon footprint and greenhouse emissions.

• KIEAE Journal
• /
• 제13권5호
• /
• pp.59-66
• /
• 2013

Current Architectural Facade Designs have been trending to increased glass areas resulting in increasing impact on interior lighting and daylighting. In regards to indoor environmental quality, the increase in window space has a large impact on the daylighting received which ultimately impacts the liveability of a space. Especially when considering seasons, in the summer, excessive daylighting can result in glare as well as put an increased load in conditioning the air space further reducing energy efficiency. As a result, in order to improve the sustainability performance of a building, it is important to limit the natural lighting exposure to properly meet the needs and conditions of the building occupants. One of the most representative features to limit excessive sunlight exposure, is to incorporate operable blind systems. To this end, this research has been based on simulations performance through the Radiance Program. Radiance is capable of analyzing performance of daylight and impact of sunlight. Through analysis of different slat angles and blind shapes, impact and minimization of energy usage was evaluated. Furthermore, seasonal analysis was performed in order to understand the effects of seasonal climate factors. Ultimately this research provides an analysis of operable blinds optimization and effects of blind shape, control factors and angle of shading.

• 한국태양에너지학회 논문집
• /
• 제28권3호
• /
• pp.60-66
• /
• 2008

This study is to investigate an optimal size and position of PV system for apartment complex through the electrical load matching analysis. The 4 types of arrangements of apartment buildings are considered as follows; ㅡtype, alternative ㅡtype, ㄱtype and ㅁtype. We assume that the studied site is composed of 9 buildings. Firstly, solar access evaluation of roof and facade in apartment buildings was performed with the hourly simulations of total received insolation on each surface considering the shading effect of buildings. Electrical load profile of typical Korean apartments were investigated for the load matching analysis. To calculate an annual total PV output, we used MERIT program which is a hourly based load matching tool developed by ESRD. TRY weather data of Daejeon are applied for this analysis. Result shows that approximately 11% of total electric load of the site can be supplied by the PV system in the case of full installation of PV system at the whole south-face roof area of 9 buildings in this stuided apartment complex. Depending on a various installation option of roof and facade area, the possible ratio of PV supply in total electrical load varies from 9% to 42%. Among the 4 arrangement types, the ㅡtype revealed the best option for the maximum output of PV system.

• 한국태양에너지학회 논문집
• /
• 제38권2호
• /
• pp.45-53
• /
• 2018

For the preliminary step for estimating the performance of roof-type photovoltaic system in urban areas, we analyzed the solar radiation reduction ratio by shadow effect by buildings using DSM (Digital Surface Model) and GIS (Geographical Information System) tools. An average loss by the shadow is about 19% in Seoul. The result was related to the building density and distribution. Monthly results show that the winter season (December and January) was more affected by the shading than during the summer season (June and July). It is expected that useful empirical formulas can be made if more detailed correlation studies are performed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.192-193
• /
• 2007

An evaporated Ti/Pd/Ag contact system is most widely used to make high-efficiency silicon solar cells, however, the system is not cost effective due to expensive materials and vacuum techniques. Commercial solar cells with screen-printed contacts formed by using Ag paste suffer from a low fill factor and a high shading loss because of high contact resistance and low aspect ratio. Low-cost Ni and Cu metal contacts have been formed by using electro less plating and electroplating techniques to replace the Ti/Pd/Ag and screen-printed Ag contacts. Ni/Cu alloy is plated on a silicon substrate by electro-deposition of the alloy from an acetate electrolyte solution, and nickel-silicide formation at the interface between the silicon and the nickel enhances stability and reduces the contact resistance. It was, therefore, found that nickel-silicide was suitable for high-efficiency solar cell applications. Cu was electroplated on the Ni layer by using a light induced plating method. The Cu electroplating solution was made up of a commercially available acid sulfate bath and additives to reduce the stress of the copper layer. In this paper, we investigated low-cost Ni/Cu contact formation by electro less and electroplating for crystalline silicon solar cells.

• 한국약용작물학회지
• /
• 제25권4호
• /
• pp.238-243
• /
• 2017

Background: The production method of ginseng seedlings for ginseng cultivation is very important to ensure healthy rooting system as well as high quality, and yield of the resultant plants. This study was carried out to compare the growth characteristics of 2-year-old ginseng plants that were produced from seedlings grown in self soil nursery (SSN), nursery soil (NS) or hydroponic culture (HC). Methods and Results: The shading prop used was composed of four-layered 4 polyethylene (blue 3 + black 1) shade screen. The management of main field was done by inserting oil cake (1,200 kg/10 a) and then allowing Sudan grass to grow for a year. Seedling transplantation was carried out on April 6. Root growth was measured on October 25. Root weight was observed to be excellent at 6.0 g, following SSN transplantation. Root length was 21.2 cm for HC seedlings, but these plants had a physiological disorder (i.e., rusty root), in 83.5% plants of this treatment. The ratio of PD/PT (protopanaxadiol saponins / protopanaxatriol saponins) was higher in NS seedlings. Plant analysis revealed that Fe content was lower in HC seedlings with high rustiness. The growth of 2-years-old ginseng was different following these varying seedling cultivation methods, but seedlings from NS were not different from those grown in SSN. Conclusions: For the propagation of 2-year-old ginseng plants, NS seedlings may be a good substitute for SSN seedlings.

• 원예과학기술지
• /
• 제34권1호
• /
• pp.32-45
• /
• 2016

Fruit bagging has been widely practiced in peach cultivation to produce high quality and unblemished fruit. Moreover, fruit bagging has been utilized to study the effect of shading on the quality of fruit. We conducted a proteomic analysis on peach fruit to elucidate the biochemical and physiological events that characterize the effect of bagging treatment. Comparative analysis of 2D electrophoresis (2-DE) gels showed that relative protein levels differed significantly at 125 DAFB (days after full bloom), as well as at 133 DAFB in fruit that had been bagged until 125 DAFB, followed by exposure to sunlight. Most of the proteins with altered expression were identified by MALDI TOF/TOF. Twenty-one proteins with differential expression among the groups were identified at 125 DAFB, while thirty proteins with differential expression among the groups were identified at 133 DAFB. The analysis revealed that expression of proteins involved in photosynthesis, stress responses, and biochemical processes influencing metabolism were altered during bagging treatment, suggesting that regulation of the synthesis of carbohydrates, amino acids, and proteins influenced fruit size, solid/acid ratio, and peel color. This work provides the first characterization of proteomic changes in peach in response to fruit bagging treatment. Identifying and tracking protein changes may allow us to better understand the mechanisms underlying the effects of bagging treatment.

• 한국농공학회논문집
• /
• 제64권4호
• /
• pp.21-30
• /
• 2022

Renewable energy systems aim to achieve carbon neutrality and replace fossil fuels. Photovoltaic technologies are the most widely used renewable energy. However, they require a large operating area, thereby decreasing available farmland. Accordingly, agrivoltaic systems (AVSs)-innovative smart farm technologies that utilize solar energy for crop growth and electricity production-are attracting attention. Although several empirical studies on these systems have been conducted, comprehensive research on their design is lacking, and no standard model suitable for South Korea has been developed. Therefore, this study created an integral design of AVS reflecting domestic crop cultivation conditions and conducted a structural analysis for safety assessment. The shading ratio, planting distance, and agricultural machinery work of the system were determined. In addition, national construction standards were applied to evaluate their structural safety using a finite element analysis. Through this, the safety of this system was ensured, and structural considerations were put forward. It is expected that the AVS model will allow for a stable utilization of renewable energy and smart farm technologies in rural areas.

• 한국토양비료학회지
• /
• 제1권1호
• /
• pp.125-128
• /
• 1968

엽(葉)의 차광(遮光)을 피(避)하고, 근부(根腐)를 피(避)하는 일방(一方) 양분(養分)을 적정(適正)히 공급(供給)할 수 있는 수경재배(水耕栽培)의 조건하(條件下)에서 출수이후(出穗以後)의 엽(葉)의 잔존수(殘存數)가 후기생육(後期生育) 및 탄수화물(炭水化物)의 전류(轉流)에 미치는 영향을 검토(檢討)하였으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 출수기(出穗期)에 전엽전엽(全葉剪葉), 지엽(止葉) 1 매잔류(枚殘留), 토위엽(土位葉) 2 매잔류(枚殘留) 및 토위엽(土位葉) 3 매잔류(枚殘留) 등 처리(處理)에 있어 등숙비율(登熟比率)은 각각(各各) 38.8, 74.7, 83.9 및 87.0%이였으며 정조천립중(精租千粒重)은 전엽전엽(全葉剪葉)이 21.3g로 가장 낮고 기타처리(基他處理)는 28.7g로 차이(差異)가 없었다. 2. 전엽수(剪葉數)의 증가(增加)에 따라 출수기(出穗期)에 축적(蓄積)된 탄수화물(炭水化物)의 전류(轉流)는 증가(增加)되며 간기중(稈基重)은 감소(減少)된다. 3. 출수기(出穗期) 이후(以後) 지엽(止葉)과 차엽(次葉)2매(枚)가 건재(健在)하면 등숙비율(登熟比率) 80% 정도(程度)로 유지(維持)시킬 수 있으리라 추정(推定)된다.

• 임산에너지
• /
• 제21권1호
• /
• pp.65-75
• /
• 2002

본 연구는 주요 활엽수종을 대상으로 인위적으로 광선의 강도를 달리한 유묘의 생장과 물질생산량에 대한 수목의 생장패턴을 구명하기 위하여 실시되었다. 연구대상 수종은 자작나무, 박달나무, 느티나무, 고로쇠나무, 산벚나무, 쥐똥나무 등이며, 자연전광을 100%, 38-62%, 22-28%, 7-20%, 2-6%로 조절된 피음포지를 조성후 2년간 실시한 결과는 다음과 같았다. 일반적으로 양수로 분류되는 수종으로서 전광에서의 묘고와 근원경의 상대생장율이 자작나무와 박달나무는 피음 강도가 강한 투광을 2-6% 처리구보다 약 2배 이상 우수한 생장율을 나타냈다. 내음성이 상대적으로 강하다고 분류되는 수종의 묘고와 근원경 생장율은 투광을 38∼62% 피음 처리구에서 고로쇠나무와 쥐똥나무는 다른 처리구에 비해 양호한 생장을 보였다. 대부분의 수종에서 피음처리 수준에 따른 광량 감소와 함께 총물질생산량이 급격히 감소하였고, 잎과 줄기의 비율이 뿌리에 비해 증가하는 경향을 보였다. 유묘의 T/R율은 대부분의 수종이 피음의 강도가 강할수록 T/R율이 높아지는 경향으로 전광처리구 0.6∼3.2보다 투광을 2-6% 피음 처리구가 1.1∼5.0으로 높게 나타냈다. 전체적으로 비교할 때 조사 대상의 모든 활엽수 묘목에서 피음처리에 의한 광량이 감소할수록 SLA가 증가하는 경향으로, LAR과 LWR에서도 유사한 경향을 보여 광환경의 변화에 따른 피음의 강도가 강할수록 통계적으로 유의적인 차이를 보이며 증가하였다. 그러나 자작나무의 경우에는 LWR이 점진적으로 증가하다가 투광을 6% 미만의 최강피음 처리구에서 급격히 감소하는 경향을 보였다. 이러한 결과는 강한 피음에 의한 식물테의 물질생산 저하가 엽면적 및 엽량의 감소등 수체 내의 생리적 특성에 영향을 미친 것으로 생각된다.향상되었음을 알 수 있다. 이상의 결과에서 다양한 개입활동들이 환자의 치료순응도를 향상시키는 데 기여할 수 있음을 제시할 수 있다. 그러나 계량적 메타분석 기준에 부합되는 연구의 논문 수가 제한적이라는 한계점이 있으며, 연구에 사용되는 개입방법의 시도가 더욱 다양화될 필요성이 제시되고 있어 향후 이와 관련된 많은 연구들이 활성화되기를 기대한다.bscessation은 수술 후 4개월에서 7개월 사이에 발생하므로 follow-up 은 8개월까지 이루어져야 한다.장 싫어하는 것으로 나타났으며, 갈색란(Brown)과 난각색이 갈색에 가까운 시료(Trt-Brown)사이와 백색란(White)과 백색에 가까운 시료(Trt-White) 사이에는 통계적으로 유의차가 없었다. 난각색과 영양이 상관이 없다는 것을 교육한 후 실시한 두 번째 설문에서는 갈색에 가까운 계란(Tn-Brown)을 가장 좋아하여 1순위와 2순위가 바뀐 것 이외에는 첫 번째 질문의 결과와 같았다. 결론적으로 현재 우리나라에서는 갈색 정도의 차이 문제이지 갈색란을 좋아함을 알 수 있었고, 교육에 의해 조금씩은 고정 관념을 바꿀 수 있는 가능성을 확인할 수 있었다.ique impact at 0.70 km/s and 0.91 km/s were compared with experimental results and Eulerian hydrocode CTH simulation results. The Lagrangian code NET3D is superior to Eulerian code CTH in the computational accuracy. Agreement with the experimentally obtained final deformed cross-sections of the projectile is