• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.4
• /
• pp.311-318
• /
• 2020

A photovoltaic (PV) system uses an AC module integrated converter (MIC) to operate PV cells at a maximum power point (MPP) and for high efficiency. The MPP of a PV cell varies depending on partial shading conditions, and loss occurs differently according to the configuration method of the PV-MIC. Therefore, this study compares the losses of passive components and power semiconductors according to the partial shading conditions of the PV module. Theoretical loss analysis is performed using parameters for the datasheet and PSIM simulation results. Analysis results verify that the one-stage PV-MIC demonstrates high efficiency.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.769-780
• /
• 2018

This paper presents an analysis of the power gain under partial shading conditions (PSC) when the partial shade loss is being compensated in photovoltaic(PV) system. To analyze the power gain, our study divides the mismatch loss into partial shade loss and operating point loss. Partial shade loss is defined as the power difference between a normal string and a partially shaded string at the maximum power point (MPP). Operating point loss is defined as the power loss due to the operating point shift while following the MPP of the PV array. Partial shading in a PV system affects the maximum power point tracking (MPPT) control by creating multiple MPPs, which causes mismatch losses. Several MPPT algorithms have been suggested to solve the multiple MPP problems. Among these, mismatch compensation algorithms require additional power to compensate for the mismatch loss; however, these algorithms do not consider the gain or loss between the input power required for compensation and the increased output power obtained after compensation. This paper analyzes the power gain resulting from the partial shade loss compensation under PSC, using the V-P curve of the PV system, and verifies that power gain existence by simulation and experiment.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.75-83
• /
• 2014

Heat loss through windows and doors occupies 20 to 45% of the total heat loss in building. It accounts for a large proportion of the total heat loss in building. In order to suppress the amount of heat flow through the windows and doors were considered actions such as reinforcement of insulation performance of window, adoption of low-e glass, and installation of solar heat shading device. The Purpose of this study is to compare solar heat shading performances of 3 types of internal blinds in the summer. In order to verify the solar heat shading performances of the blinds, a roll blind, blind A(Venetian blind) and blind B(Daylight guiding venetian blind)were installed in the four rooms with the same environmental conditions. As a result of the experiment, the blind B, blind A, roll blind showed an excellent performance in that order. Its because the blind B is made of aluminum materials coated with special paints on surface. It doesn't converted to long wave by short wave light. and it is reflected to short wave to outside.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.10-15
• /
• 1987

The experiment was designed to determine the proper shading rate and shading materials to decrease the excessive dried leaves during cure of burley tobacco. Five shading rates and seaven shading materials were applied on the pipe vinyl house from initial stage or yellow stage of cure. Temperature was lower and weight-loss of leaves delayed with shading from initial stage to browning stage of cure. Excessive dried leave were largely decreased as shading rate was increased to 70%. However, at shading rate more than 70%, its decreasing extent was fewer. Price per kg and physical properties improved considerably at shading rate of 50%. Shading materials alone could not completely prevent excessive dried leaves but it could decrease them. Orange, white and purple color vinyl among shading materials had so effects of shading as the black shading cloth during curing. However, white color vinyl didn't endure more than a few months due to sunshine. A difference of light quality in visible light was no significance on air curing.

• KIEAE Journal
• /
• v.17 no.2
• /
• pp.29-34
• /
• 2017

Purpose: Recently, significant heat loss through the window takes place in buildings. Nevertheless, there exists little literature concerning the exterior horizontal shading devices and the design criteria are not clearly settled yet. Applying the exterior horizontal shading devices is more efficient as compared to the interior shading devices in that solar radiation can be directly blocked before passing through the window or the envelope. The purpose of this study is to reduce the internal load by designing the exterior horizontal shading devices and verify the degree of reduction in energy consumption. Method: This study aims to reduce energy consumption in cooling and heating through proposing proper length and shape of the exterior horizontal shading devices in public buildings. In the process, actual energy data and the Design Builder simulation program are utilized. In addition, economic aspect is considered to figure out the optimal length of the exterior horizontal shading devices that maximizes efficiency. Result: As a result, the proper length and shape of the exterior horizontal shading devices are provided as follows: 1) Energy consumption in cooling and heating is minimized when the exterior horizontal shading devices are designed as 0.5m*2. 2) Electricity bill is the lowest when the exterior horizontal shading devices are designed as 3.3m*2. The gap between maximum and minimum electricity bill is about 7.8~14%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.901-905
• /
• 2010

PV module has many power loss factors, and series resistance is the most important elements of them. It is therefore easy to expect the partial shading decrease the lifetime of the semiconductor depletion layer in thin film PV module. Different shading losses could be related with the hot spot which is critical in expecting the reliability issue. In this paper we have modelled the series resistance of the PV module with both different direction of the cell line and shading area of the panel. From the results, thin film a-Si PV module has shown different properties by shading direction.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.4
• /
• pp.41-47
• /
• 2016

A bypass diode is connected in parallel to solar cells with opposite polarity. The advantage of using the bypass diode is circumvented a destructive efforts of hot-spot heating in the photovoltaic(PV) module. In addition, it is possible to reduce a energy loss under the partial shading on the PV module. This paper presents a characteristic of photovoltaic module under partial shading condition and with defective bypass diode by using the experimental data. The results of field testing for each photovoltaic modules, when photovoltaic system which is connected power grid is operating, the inner junction-box temperature of shading photovoltaic module is high $5^{\circ}C$ because of difference of flowing current through into bypass diode. And incase of not operating photovoltaic system, the inner junction-box temperature of module with defective bypass diode is greatly higher than partial shading PV module.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.407-407
• /
• 2011

태양전지에서 Fill Factor를 저하시키는 직렬저항의 성분들은 베이스저항, 에미터 저항, contact 저항, finger 저항, busbar 저항 등이 있다. 각각의 저항 성분은 전극의 width및 height, 그리고 전극과 전극 사이의 spacing을 가변함에 따라 각기 다른 값을 나타내는데, 낮은 직렬저항 값을 달성하기 위해 전극의 면적을 크게 하는 것이 바람직하지만, 이는 cell의 shading loss를 증가시켜 cell의 JSC를 저하시킨다. 그러므로 cell의 면적과 전면 에미터의 면저항을 고려하여 shading loss와 직렬저항을 최소화 하는 최적의 전면 전극의 설계가 중요하다. 본 논문에서는 시뮬레이션을 통해 전면 전극의 height, spacing 및 width를 가변하여 1 by 1, 2 by 2, 3 by 3의 cell 면적에서의 전면 전극의 설계를 최적화 하였다. 시뮬레이션 결과 각각의 cell면적에서 단위면적당 저항 값이 500 $m{\Omega}$ 이하, shading loss가 4% 미만인 전극을 설계하였다.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.362-366
• /
• 2001

This study was conducted to reduce degradation of marketability by the rot and discolor of onion bulbs under room temperature from 1977 to 1998. Allium cepa cv. Changnyungdeago, late strain, was used for the test at the storage condition of non-shading, 55% and 95% shadings. The results obtained are as follows: The mean temperature was maintained lowly 1.0∼2.9$\^{C}$ in 55% and 2.0∼3.8$\^{C}$ in 95% shadings in contrast to nun-shading, but the relative humidity was a tittle higher in high shading than other shading condition. The illumination and color density maintained lowly in high shading. After 21 days of storage, the rate of discolored onion bulbs was significantly higher in non-shading(90.0%) than 55%(35.7%) and 95%(13.3%) shadings. The rotting rate by the end of August was a little decreased at 55%(25.4%) and 95% shadings(26.5%) in contrast to non-shading(28.9%), and total weight loss was maintained lowly in high shading.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.102-107
• /
• 2010

a-Si solar cell has relatively dominant drift current when compared with crystalline solar cell due to the high internal electric field. Such drift current make an impact on the PV module in the local shading. In this paper, the a-Si PV module output characteristics of shading effects was approached in terms of process condition, because of the different deposition layer of thin film lead to rising the resistance. We suggested design condition to ensure the long-term durability of the module with regard to the degradation factors such as hot spot by analyzing the module specification. The result shows a remarkable difference on module uniformity for each shading position. In addition, the unbalanced power loss due to power mismatch of each module could intensify the degradation.