• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.69 no.1
• /
• pp.15-24
• /
• 2024

Environmental factors play an important role in crop growth and development. In recent years, climate change has become a challenge that limits environmental factors. Light is an important environmental factor for photosynthesis in rice. In addition, temperature is one of the most important factors for rice production; thus, a 1℃ increase in temperature because of climate change can affect rice growth and development. Therefore, we investigated the effect of shading on the growth characteristics of rice under different temperature conditions from the vegetative stage to the flowering stage. Plants were grown at three different temperatures: 26℃/16℃ for 21℃, 29℃/19℃ for 24℃, and 22℃/32℃ for 27℃ in a phytotron. A 55% shade treatment was applied after 10 days of transplanting until the flowering stage. Plant height was not affected by the shading treatment. In the maximum tiller number response to shading, a lower tiller number and growth speed of tiller was found in the 27℃ condition. Among leaf characteristics, shading increased the flag leaf area, length, width, and effective leaf area; however, it decreased the leaf number on the main stem, especially at 27℃. In terms of stem characteristics, shading affected culm wall thickness in both varieties. Finally, regarding the panicle characteristics, lower panicle numbers, spikelet numbers per panicle, primary numbers, and secondary numbers per panicle were found under the shading treatment. Most of the desirable characteristics were affected by the shading treatment at 27℃. Overall, these results indicated that shading had a greater effect on rice plant growth at high temperature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.4
• /
• pp.496-504
• /
• 1996

The study was conducted to obtain the basic information on increasing aromatic degrees by shading and organic matter application on Condonopsis lanceolata. The result were as followings : Fresh root wt. in shading 55 % treatment was increased about twices, whereas fresh root weight in non-shading was decreased. But growth of ground parts such as vine length, leaf width, and leaf number was promoted under non-shading treatment. Macroelements such as K, Ca, and Mg, were increased in non-shading and higher organic matter application. The components such as crude protein, fiber, and ash were increased in the shading 55% treatment compared with non-shading. In the sixteen amino acids, arginine contents were the highest in non-shading and organic matter 30M/T. Recovery yield of essential oil was 0.005% in non-shading. The highest was organic matter 30M/T in the non-shading as 0.007%. Major aromatic constituents were 11 kinds of aliphatic alcohols such as I-hexanol, cis-3-hexenol, and trans-2-hexanal. As a result, major aromatic degree was higher in shading 55%, also increased in the much organic matter application. It was considered to be applied dense shading 55% and much organic matters to produce Condonopsis lanceolata plants which have high aroma and good quality.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.292-298
• /
• 1997

To compare the growth pattern of ginseng plant under between conventional shading(light transmittance rate 3％) and polyethylene net shading(light transmittance rate 10％), the distribution of leaf area, specific leaf weight (S. L. W), leaf and stem dry weight and changes in light intensity were investigated in 2, 4 and 6 year old ginseng plant populations. Light transmittance rate(L.T.R.) was 3％ at front line, 2％ at middle line and 1.5％ at rear line under conventional shading but it was 12, 10 and 8％ under polyethylene net(P.E) shading, respectively. In 2 year old population, there was a little difference in the growth characteristics investigated between conventional and P.E. shading. In 4 year old field, the leaf area, stem and leaf dry weight decreased in large amount in the order of middle, and rear line on ridge under conventional shading, but with a little difference under P.E. shading. And these trends enlarged in 6 year old field with appearance of a large part of shoot over furrow from ridge planted ginseng. Root yield index was much lowered at the rear 3rd, 4th and 5th line of the conventional shading bed, but there was no yield difference among lines except 5th lines under the P.E. shading with higher yield by 28％ than conventional shading.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.1
• /
• pp.30-37
• /
• 2019

Background: This study was conducted to investigate the changes in the photosynthetic parameters, chlorophyll content, chlorophyll fluorescence, and growth characteristics of Aruncus dioicus var. kamtschaticus seedlings under different shading treatments. Methods and Results: The shading treatment was regulated with the shading level (non-shaded, 35%, 55%, and 75% shading). Photosynthetic activities, such as net photosynthetic rate, stomatal conductance, stomatal transpiration rate, and performance index on absorption basis ($PI_{ABS}$)were the highest under 35% shading ($4.36{\mu}mol\;CO_2{\cdot}m^{-2}{\cdot}s^{-1}$, $54.2mmol\;H_2O{\cdot}m^2{\cdot}s^{-1}$, $0.66mmol\;H_2O{\cdot}m^{-2}{\cdot}s^{-1}$, and 1.3, respectively), and the lowest under 75% shading. This implies that the decrease in net photosynthetic rate may be due to an inability to regulate water and $CO_2$ exchanged through the stomata. Thechlorophylla, b, and a + b contents were increased with elevating shading level and the chlorophyll a/b ratio showed non-significant differences. It was found that the dry weight (leaf, shoot, and whole) was the highest (1.14 g, 0.49 g, and 2.31 g, respectively) under 35% shading and the t/R ratio was the highest under 75% shading. Conclusions: It is concluded that 75% shading exhibited a strong reduction of photosynthetic activity, and 35% shading showed the best conditions for the early growth and cultivation of A. dioicus var. kamtschaticus.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.1
• /
• pp.16-22
• /
• 2007

This study was carried out to investigate the effects of shading conditions for appropriate light level for several floricultural plants native to Korea. The results under the different shading levels of 0, 30, 50, 60% and full sun light are as follows; Growth of Miscanthus sinensis and Pennisetum alopecuroides, which are heliophyte plants, were better under 30% shading condition than full sunlight. Higher shading levels was poor than control. Growth of Sedum spectable was decreased when light intensity was decreased. As shading level increased, growth reduction rate in Sedum spectable were higher than that of other species. Growth and ornamental value of Arisaema amurense, which is sciophyte plants, were increased under 50% shading.

• KIEAE Journal
• /
• v.15 no.1
• /
• pp.83-88
• /
• 2015

This study aims to develope the light-weight PV blinds with windows and to investigate the shading analysis by the control conditions. For the study, the polycarbonate characteristics and coating methods are analyzed and the PV blind design for a small office is suggested. Also, the mock-up model of a suggesting system was made. The field tests were controled based on a solar altitude under clear sky conditions. As results, it is necessary to use a polycarbonate instead of a tempered glass for a light-weight PV. The shading effects of blind systems are high in slat angle $30^{\circ}$ and low in $0^{\circ}$. Also, the shading ratio is more affected by solar latitude than solar altitude. The shading change rate is relevantly constant on the solar altitude.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2503-2510
• /
• 2002

Since the first shape-form-shading technique was developed by Horn in the early 1970s, many different approaches have been continuously emerging in the past three decades. Some of them improve existing techniques, while others are completely new approaches. Using the image reflectance equation, they estimate the 3-D shape of an object utilizing adequate constraints. Each algorithm applies different constraints such as brightness, smoothness, and integrability to solve the shape-from-shading problem. Especially for symmetric objects, a symmetry constraint is proposed to improve the performance of existing shape-from-shading algorithm in this paper. The symmetry constraint is imposed to a conventional algorithm and then the improvement in the performance of 3-D shape reconstruction is proved by quantitatively comparing the depth and gradient errors.

• KIEAE Journal
• /
• v.2 no.4
• /
• pp.21-26
• /
• 2002

Modem architecture represent a great capitalistic, polishing, high-technology image to the public by design. As a result, glass architecture which show 'transmittance' in desinging play a leading part, consequently a role of machine is increasing in controlling an internal environment of building. These movement look like assisting an universal standard building disregarding a each nation's climate peculiarity, if glass building is applied by a proper external shading device. the shading device has a great effect on the reduction of cooling load energy, this research to propose the proper designing scheme of the fixed external shading device. The effect of proper external shading device on the cooling load is evaluated by the numeric simulation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.130-135
• /
• 2010

In this paper, the shading ratio about to output the minimum critical power of a photovoltaic panel was determined by experiment and simulation. A 2.475[kW] poly-crystalline photovoltaic panel consisting of 11 modules was used in the experiment and its surface was covered with shading curtains, thus the amount of light incident to the modules were controlled. In order to compare with the experimental results, the experimental circuits were modelled with the CASPOC (power electronics electrical drives simulator) and module parameters were applied to it, by which the minimum critical power was calculated. As a result, the photovoltaic panel was about to generate the power when the 5th shading curtains were removed from the module surface, after then the output power linearly increased by removing the shading curtains. In addition, the CASPOC simulation results were similar to the experimental results in the abrupt decreasing pattern of power.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.6
• /
• pp.1-14
• /
• 2018

The shading device on the window of the building can be an passive solution to reduce the cooling load and lighting energy, as well as improving the indoor comfort. It is also an architectural element that must be considered for building energy-efficient buildings such as eco-buildings and zero-energy buildings. However, due to various building environments and various shading devices, the installation of excessive shade may lead to the risk of losing the effectiveness of windows. In this study, we propose a method for optimal automatic control of shading device and evaluate its effectiveness by energy analysis of several shading devices.