• 제목/요약/키워드: Sewer Pipes

검색결과 96건 처리시간 0.051초

하수도용 연성관의 다짐정도에 따른 관거의 거동에 대한 사례연구 (A Case Study of between Pipe Deformation-Compaction Ratio using Flexible Sewer Pipe)

  • 김영진;이수헌;안창근;오진기
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 춘계 학술발표회
    • /
    • pp.1012-1017
    • /
    • 2010
  • Sewer Pipes are not being managed for twenty years after laying. So, The life span of sewer pipes is on the decrease. For solve the life span decrease of sewer pipes, correct checking of questions and measure preparation are necessary through investigation in sewer pipes. This research investigated on the state of sewer pipes in the housing and industrial sites through CCTV(closed-circuit television) and device of digitalized strain investigation. And, a result is as follows. A results of PE, PVC, GRP, CSP investigations were found of pipe-transformation state by earth pressure and external load.

  • PDF

RDII발생 및 기존 시나리오에 따른 오수간선 네트워크 설계방법 검토 (Assessment of Design Method about Sanitary Sewer Network according to RDII and Established Scenario)

  • 김정률;오재일
    • 한국물환경학회지
    • /
    • 제32권4호
    • /
    • pp.367-374
    • /
    • 2016
  • In this study, the RDII impact on sewer designing in the upstream monitoring area (A site) was considered. Based on the long-term (1/1/2011~12/31/2011) rainfall and flow data consisting of 10-min interval sampling in the nearby design area (B site), the maximum RDII/DWF ratio was selected. The sewer network system at B site was evaluated by the Manning equation. Scenario 1 considering the hourly maximum flow with respect to the flow velocity showed that none of the sewer pipes satisfied the minimum flow velocity condition (0.6 m/s), and 40 pipes did not achieve half of the velocity condition. In scenario 2 considering I/I, 1 the pipes satisfied 0.6 m/s, and 35 pipes showed 0.3 m/s. Scenario 3 reflected the effect of RDII. Velocities in 26 pipes were less than 0.3 m/s, and 4 pipes satisfied the velocity condition. With respect to the allowance rate, 17 pipes were shown to have more than 99%, and none of the pipes satisfied less than 95% of the allowance rate in scenario 1. In scenario 2, 17 Ed: Per the Table pipes showed more than 99% and one pipe showed less than 95%. In scenario 3, 16 pipes showed more than 99% of the allowance rate, and 19 pipes showed less than 95%. Based on these results, it is predicted that deposition would occur due to the slow flow velocity; however, capacity would not be a problem.

대규모 아파트 단지주변 하수관로의 악취 발생과 대책 II: 주거지역 하수관로의 악취원인과 대책 (The Foul Smelling from Sewer Pipe near Large Apartment Complexes and its Countermeasures II: The Cause for Foul Odors of Sewer Pipes in Residential Areas)

  • 이장훈;강선홍
    • 상하수도학회지
    • /
    • 제21권5호
    • /
    • pp.631-639
    • /
    • 2007
  • This study investigated the construction and operation status of sewer pipes and water-purifier tanks near densely populated areas like large apartment complexes, in order to find out cause for offensive orders. The study results revealed that the main cause arose from the water-purifier tank and public sewer pipes near ordinary residential areas. First, in case of independent water-purifier tanks, the air is forced into the rotten part of large tanks nearby which should be operated in an anaerobic state, so that the tank changes into an aerobic state, or dirty water, which is returned during the sludge return process, falls on the top of the rotten tank, preventing scum from forming within the tank. Such problems cause incompletely purified water in the purifier tank to be discharged, which in turn results in filthy water. Second, in case of public sewer pipes, deteriorated or aging pipes, or the mixture of rain water and dirty water by mixing up combined and separated sewers system can cause foul odors in residential areas. Therefore, offensive odors in residential areas can be radically reduced through the appropriate construction and management of facilities including water-purifier tanks. As well, if more separate sewers are installed as part of an improvement project for public sewer pipes, complaints about foul smell can be minimized.

우수관거 흐름 제어를 위한 관망 설계에 관한 연구 (A Study of Sewer Layout to Control a Outflow in Sewer Pipes)

  • 김중훈;주진걸;전환돈;이정호
    • 한국방재학회 논문집
    • /
    • 제9권1호
    • /
    • pp.1-7
    • /
    • 2009
  • 최적의 우수관망 설계를 위한 기존의 연구 모형들은 관경, 관 경사 등을 포함한 관거의 설계에 있어서 설계 강우에 대하여 최소의 비용을 목적으로 하여왔다. 그러나 이러한 모형들은 우수관망 관거 내 흐름의 중첩효과에 대한 고려는 하지 않고 있다. 관거 내 흐름의 특성은 관경, 관 경사 등에 따라서 달라지며 특히 관망의 구성이 달라짐에 따라서 크게 영향을 받는다. 본 연구에서는 우수관망을 구성함에 있어서 관거 내 흐름을 분산시키고 제어함을 목적으로 하고 있다. 이것은 관망 구성에 따른 관거 내 흐름의 중첩효과를 제어함으로써 가능하며, 이러한 흐름의 제어를 통하여 우수관망에서의 내수침수 위험도가 저감될 수 있다. 본 연구에서는 맨홀간 관거의 연결 방향을 조정함으로써 관내 유입량을 분산시키고 그 결과로서 유출구에서의 첨두 유출량은 저감되도록 우수관망을 구성하였다. 이때 관망 내 흐름에 대한 수리학적 분석은 SWMM(Storm Water Management Model)을 본 모형과 연계 구성함으로써 가능하였다. 관망 구성에 따른 내수침수 위험도의 저감을 검증하기 위하여 본 연구에서는 서울시 가락 배수분구의 현재 구성된 관망에 대하여 유출구에서의 첨두 유출량을 최소화하기 위하여 맨홀간 관거의 연결 방향을 변화시켰으며, 그 결과 30분 지속시간의 설계빈도 강우에 대하여 유출구 첨두 유출량은 약 20% 감소하였다. 또한 수정된 관망 구성은 설계빈도를 초과하는 강우에 대해서도 월류량 발생량이 저감되는 결과를 나타내었다.

하수관로 돌출부 절삭을 위한 로봇장치 개발 및 절삭성능 평가 (Development of a Cutting Robot for Repairing Lateral Protrusions of the Sewer Pipe and Evaluation of Cutting Performance)

  • 양인환;황철성
    • 한국건설순환자원학회논문집
    • /
    • 제6권1호
    • /
    • pp.72-77
    • /
    • 2018
  • 본 연구에서는 하수관의 접합부 돌출부 절삭용 로봇을 개발하고, 이의 성능평가를 수행하였다. 하수관로 절삭 성능평가를 위해 주하수관의 재질 및 직경, 가지관의 재질을 실험변수로 설정하였다. 주하수관의 재질은 콘크리트 흄관과 PE관을 사용하고, 직경은 300 및 500mm를 적용하였다. 가지관의 재질은 PE 및 PVC로 설정하고, 직경은 100mm로 설정하였다. 절삭로봇을 개발된 이용하여 절삭성능 실험을 수행하였다. 절삭실험 후의 가지관의 잔여 돌출 길이는 5mm 이하로서 목표 절삭 잔여 길이를 모두 만족하고 있다. 따라서 개발된 하수관로 절삭로봇을 이용하여 하수관 접합부 돌출관을 효과적으로 절삭할 수 있다.

현장중심형 하수도용 연성관의 거동특성에 대한 고찰 - 다짐도·변형률·강성 간의 관계정립 - (A Case Study of Flexible Sewer Pipes Behaviors - Compaction Ratio·Inner Deflection Ratiov·Ring Stiffness -)

  • 김영진
    • 복합신소재구조학회 논문집
    • /
    • 제4권2호
    • /
    • pp.31-38
    • /
    • 2013
  • As the Sewer Pipe is transformed by the expansion of life cycle as a result of the technology development, flexible pipe is developed by the transformed environmental conditions. To change pipe design, three phases(compaction ration - inner deflection ratio - ring stiffness) should be considered in design conditions. The input data of pipe design were provided by compaction-inner deflection ratio-ring stiffness. M oreover, The guidelines of sewerage pipes should be considered by flexible pipes design criteria.

원심력철근콘크리관의 결함에 따른 심각도 평가 -균열 사례를 중심으로- (Failure Risk Assessment of Reinforced Concrete Sewer Pipes on Crack-Related Defects)

  • 한상종;신현준;황환국
    • 상하수도학회지
    • /
    • 제27권6호
    • /
    • pp.731-741
    • /
    • 2013
  • CCTV inspection method has been used in Korea for more than 20 years, but there is no proper assessment system for sewer failure severity that considers the domestic circumstances. This study classified the defects caused by the overburden load of reinforced concrete sewer pipes depending on severity and developed defect code by analyzing the domestic CCTV inspection videos. The defect score was assigned to each defect code, and it was classified into 5 grades for the decision-making of repair and rehabilitation. The result of this study is expected to be useful for domestic CCTV inspectors to assess the sewer condition and helpful for managers to make a decision of repair and rehabilitation.

분류식 하수관로에서 유입수 표준매뉴얼 산정방법의 보수적 수정 결과 (Conservative Adjustment of the Standard Calculation Method of Inflow Water Into a Separated Sewer System)

  • 추민경;배효관
    • 한국물환경학회지
    • /
    • 제36권5호
    • /
    • pp.423-430
    • /
    • 2020
  • To improve the low treatment efficiency of sewage treatment plants, the separated sewer system must be maintained to provide an adequate flow rate and quality of the sewage under the effect of inflow. In this study, data from five locations of Namsuk, Dukgok1, Dukgok2, Kanggu, and Opo were used to conservatively calculate the inflow water volume. The sewer flow and rainfall data were collected in 2017. The factors in the standard method used to calculate the inflow of the combined sewer pipes including "rainy days", "rainfall impact period", and "period for basal sewer" were defined as 3 mm/day, continuous rain for two days, and two weeks prior to the inflow generation, respectively. "Rainy days", "rainfall impact period", and "period for basal sewer" were conservatively adjusted to 5 mm/day, continuous rain for five days, and three weeks prior to the inflow generation, respectively. As a results of the adjustment, the linearity (r2) was improved except for in Dukgok1. This implies that the conservative adjustment made in this study could improve the management quality of sewer pipes. Also, the linear correlation coefficient (ai) between inflow and rainfall showed a large difference between the target locations, which can be another monitoring factor affecting the quality of sewer pipes. To improve the correlation based on the individual characteristics of the locations in Korea, the automatic algorithm for the inflow calculation should be developed by innovative intellectual technologies for application to the entire national area.

대규모 아파트 단지주변 하수관로의 악취 발생과 대책 1: 주거지역 하수관로의 악취 발생 특성 (The Foul Smelling from Sewer Pipe near Large Apartment Complexes and its Countermeasures I: Characteristics of the Foul-Smelling Sewer Pipe in Residential Areas)

  • 이장훈;강선홍
    • 상하수도학회지
    • /
    • 제21권5호
    • /
    • pp.621-629
    • /
    • 2007
  • This study intends to investigate the characteristics of the foul smell of sewer pipes near large apartment complexes as complaints about offensive odors have drastically increased in urban residential areas. Targeting apartments where people actually complained about foul orders, the study result revealed that components in the smell of the water-purifier tank of the target apartment were very similar to those of sewage treatment plants and night soil treatment plants. Measuring components of odors inside the management layer of tank showed that the concentration of hydrogen sulfide was 10ppm, which is approximately 160 times the safety standard of 0.06ppm; the concentration of mercaptan was 0.9ppm, which is about 220 times the safety standard of 0.004ppm. The source materials of foul odors were discharged outside through ducts, and those households living near outlets producing bad smell complain that it gets worse depending on the air pressure or wind direction and strength, and they could not even open windows. As well, these source materials were transferred by discharge pumps to public sewer pipes outside the apartment complex. While discharge pumps starts operating, they remain on the sewer pipe and then begin to spread over to roads through small openings of manholes on the road. Then, the smell offends passers-by and residents near the road, leading to a lot of complaints. The study results suggest that, among the sources of foul odors in sewer pipes of residential areas, especially those from the water-purifier tank of large apartments, hydrogen sulfide should be the main target for follow-up treatment.

하수관거보수 순위결정을 위한 침입수/유입수량에 대한 정량/정성 분석의 실행 연구 (A Quantitative/Qualitative Study of Infiltration/Inflow for Order Decision of Sewer pipe Maintenance)

  • 박명균;김대성;안원식;오정미
    • 상하수도학회지
    • /
    • 제20권1호
    • /
    • pp.53-62
    • /
    • 2006
  • This study was carried out to obtain quantities of infiltration, inflow and exfiltration on sewer pipes of three areas at a small city. From the results, the most investigated sewer pipes should be infiltrated by underground water and undetermined water. Flowrate commonly showed two peak at 6 to 8 a.m. and 6 to 9 p.m. and which may be influenced by the sewer flowrate with washing or bathing time. BOD/TN ratio of below 4.0 were inferior as compared with proper criteria 5.1. Infiltration/inflow rates of three areas were 21.7% and $0.08m^3/km$ of A, 12.4% and $0.015m^3/km$ of B, 22.4% and $0.021m^3/km$ of C, respectively. This indicates that infiltration/inflow rate of A was obviously greater than that of B and C. Also, these results show that we can conduct sewer maintenance in good order as A, C and B zone.