• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.4
• /
• pp.7-12
• /
• 1988

The Resistance Committee of Korea Towing Tank Conference extended the Cooperative Experimental Study Program(1985)[1] to perform the geosim tests by exchanging the five different scaled Series 60, $C_B=0.60$ models between the participating organizations and 13 sets of resistance data have been obtained. The test results are compared among the participating towing tanks and also with the results given in the report of the Resistance and Flow Com-identify the mittee of 18th ITTC. The form factor of each model is derived by Prohaska's method to investigate its dependency on $R_n$. On the other hand, at each $F_n$, form factors are also derived by Telfer's method to relation between $F_n$ and form factor. For this hull form, form factors show relatively weak dependency on $R_n$ and strong dependency on $F_n$. And it is also found that dependencies on both have a cross relation. It seems that further study should be continued to understand more clearly the physical phenomena involved in this problem.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.4
• /
• pp.132-139
• /
• 2017

In this study, in order to prevent the frost damage of the concrete, the characteristics of the form using heating sheet utilizing the chemical reaction of quicklime and the insulation were evaluated through experiments at low temperature. In the case of form at $-10^{\circ}C$, the form with attached heating sheet showed a temperature history of more than $10^{\circ}C$ higher than that of wood form at the early of concreting due to heat of the quicklime in the heating sheet. In the case of the insulated form, the concrete was kept at a high temperature by preserving the hydration heat. When the heating sheet and the isopink(extruded polystyrene) were attached together on the form, the effect was the same as that of the vacuum insulation. The compressive strength of the form with vacuum insulation and form with isopink, heating sheet as measured about 5 MPa at age 3. The experimental in Mongolia, as with the pervious results, the form with the heating sheet and the insulation showed the highest temperature history over $25^{\circ}C$ for 48 hours. Therefore, it was confirmed that the heating sheet and insulation are attached to the form, which helps the concrete strength development at low temperature by heat generation and the insulation effect.

• Korean Journal of Veterinary Service
• /
• v.29 no.4
• /
• pp.507-511
• /
• 2006

Acanthomatous epulis is a malignant form of gingival tumor. This is a case of epulis affecting a four-year old, intact, female Maltese dog raised as indoor pet in Iksan city. Clinical examination showed an enlarged palpable mass along the rostral maxillary gingiva. Section of the excised mass showed epithelial overgrowth and expansion from the basal portions through the tissue stroma. Post-surgical radio-graph showed displacement of the first and second maxillary incisors. Histochemical staining showed strongly positive reaction to epithelial marker cytokeratin and moderately positive reaction to connective tissue marker vimentin. This case was diagnosed as a form of maxillary gingival acanthomatous epulis. Routine clinical oral examination is suggested.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.2
• /
• pp.96-108
• /
• 2022

In this paper, we propose a systematic hull form variation technique which automatically satisfies the displacement constraint and guarantees a high level of fairness. This method is possible through multiple parameter correction curves. The present method is to improve the hull form variation method based on parametric modification function and consists of two sub-categories: SAC variation and section lines modification. For SAC variation, the utilization of two B-Spline curves satisfying GC¹ condition led to the satisfaction of displacement constraint and high level of fairness at the same time. Section lines modification methods involves in using two fuctions: the first is the waterplane modification function combining two cubic splines. the other function is the sectional area modification function consisting of 2nd order polynomial over the DLWL(Design Load Waterline) and 3rd order polynomial below the DLWL, This function enables not only the fundamental U-V section shape variation but also systematically modified section lines. The present method is expected to be more useful in the hull form optimization process using CFD compared to the existing method.

• Science of Emotion and Sensibility
• /
• v.9 no.1
• /
• pp.27-38
• /
• 2006

In the planning stage of mobile phone development, one of the most important considerations is to select a FormFactor properly to determine the strategy and Purpose of a Product. Up to now, the FormFactor has been selected only by intuitional and qualitative methods. In this study, the Appraisal Methodology using Sensibility Adjectives of Emotion and Sensibility Engineering was presented to suggest the systematic and rational framework in the field of FormFactor selection. First, we verified the conceptual FormFactors with Axiomatic Design and classified the Sensibility Adjectives into the verified FormFactors. When the FormFactor and classified Design Parameters (DP) were given to a designer, the designer implemented the preliminary designs and they were assessed and analyzed by the survey. With these processes, we were able to select the proper designs for FormFactors which were fit for the purpose of a product. This was caused by connecting the Axiomatic Design and tile Sensibility Adjectives. This study gave the possibilities that can be spread to the selection factors, except for the FormFactor, from now on.

• Journal of architectural history
• /
• v.25 no.5
• /
• pp.75-86
• /
• 2016

This paper examines the pagodas during the Bagan period, which are thought to be most valuable among those in Myanmar. They have not been sufficiently studied, in spite of their high Buddhist status. It considers the contemplation of Pato, their formal characteristics in the Bagan period and the formal categorizations of pagodas in the same period. Thus, following seven kinds of conclusions are derived: first, researchers provide opinions to the Pato which should be regarded as the Buddhist shrine-type of pagoda with a unique Bagan form, symbolically indicating that Theravada Buddhism incorporated Hinduism; second, the terraces were characteristic components in pagodas, during the Bagan period, which were built after the enthronement of King Anawratha and are thought to symbolically express the wish to widely spread Theravada Buddhism; third, Shwesandaw Zedi seems to affect not only Shwezigon Zedi, a representative standard form of pagoda in Myanmar, but also Ananda Pato; fourth, it is thought to be proper to examine the terraces by classifying them into lower, central(from pedestals to Angryeon and Bokryeon) and upper part, if it intends to divide a pagoda with bell-shaped body on the terraces during the Bagan period, into three parts; fifth, the Pato may be identified as a form of pagoda during the Bagan period, and such a form can be classified as that of Sikhara on the rectangular terrace; sixth, forms of Myanmar's pagodas can be classified into fourteen kinds of them, and they may be also grouped into transmitted, general and special type; and seventh, on the basis of the findings, it is thought that the pagodas during the Bagan period may be classified into six forms, and they can be largely categorized into transmitted, general and special type.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.3
• /
• pp.526-531
• /
• 2007

Toxoplasmosis is a parasitic infection caused by the obligate parasite, Toxoplasma gondii, that is distributed throughout the world. Infection is produced by contact with animal like dog, cat, pig, cow or horse. It is also possible to produce clinical disease in the form of oropharyngeal infection through consumption of raw or incompletely cooked meat. Handling of contaminated cat litter has been found to be the major route of transmission. There are two clinical manifestations of toxoplasmosis: the congenital and the acquired form. The congenital form is characterized by hydrocephalus, chorioretinitis, convulsion, and intracerebral calcifications in the newborn. The acquired form is further subdivided into the disseminated and the lymphadenopathic types, the latter being the more common form of the disease in men. This is a case report of a Korean 8 year 2 months female congenital toxoplasmosis child. Clinical feature, patient's medical history, radiographic evaluation and dental problems are discussed in this report.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.3
• /
• pp.281-293
• /
• 2008

In the layered medium, the Sommerfeld integral must be evaluated to calculate a space domain Green's function. The real axis integration method provides stable and accurate results over wide ranges of the observation distance and the singnal frequency. But this method has the in efficiency of approximation when the field point z is changed. Also, as the amplitude of z increases, the change of the spectral domain function is more rapidly. Therefore, the approximation is difficult when z becomes larger. In this paper, we propose a method to calculate an accurate closed-form Green's function for microstrip structure by using the closed-loop integration path.

• The korean journal of orthodontics
• /
• v.45 no.2
• /
• pp.74-81
• /
• 2015

Objective: The purposes of this study were 1) to classify lingual dental arch form types based on the lingual bracket points and 2) to provide a new lingual arch form template based on this classification for clinical application through the analysis of three-dimensional virtual models of normal occlusion sample. Methods: Maxillary and mandibular casts of 115 young adults with normal occlusion were scanned in their occluded positions and lingual bracket points were digitized on the virtual models by using Rapidform 2006 software. Sixty-eight cases (dataset 1) were used in K-means cluster analysis to classify arch forms with intercanine, interpremolar and intermolar widths and width/depth ratios as determinants. The best-fit curves of the mean arch forms were generated. The remaining cases (dataset 2) were mapped into the obtained clusters and a multivariate test was performed to assess the differences between the clusters. Results: Four-cluster classification demonstrated maximum inter-cluster distance. Wide, narrow, tapering, and ovoid types were described according to the intercanine and intermolar widths and their best-fit curves were depicted. No significant differences in arch depths existed among the clusters. Strong to moderate correlations were found between maxillary and mandibular arch widths. Conclusions: Lingual arch forms have been classified into 4 types based on their anterior and posterior dimensions. A template of the 4 arch forms has been depicted. Three-dimensional analysis of the lingual bracket points provides more accurate identification of arch form and, consequently, archwire selection.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2041-2043
• /
• 2013

A layered perovskite of Dion-Jacobson phase, $RbLaTa_2O_7$, was successfully exfoliated into colloidal suspension via successive ion-exchange and intercalation reaction. The pristine perovskite $RbLaTa_2O_7$ was synthesized by conventional solid-state reaction, and then, it was ion-exchanged with hydrochloric acid to obtain a protonic form of perovskite. The resulting proton-exchanged perovskite was reacted with ethylamine to increase interlayer spaces for further intercalation reaction. Finally, the ethylamine-intercalated form was exfoliated into nanosheets via an intercalation of bulky organic cations (tetrabutylammonium). According to X-ray diffraction (XRD) analysis, the TBA-intercalated form showed remarkably increased interlayer spacing (${\Delta}d$ = 1.67 nm) in comparison with that of the pristine material. Transmission electron microscopic image of exfoliated perovskite clearly revealed that the present exfoliated perovskite were composed of very thin layers. This exfoliated perovskite nanosheets could be applicable as building blocks for fabricating functional nanocomposites.