• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.305-307
• /
• 2003

This paper presents an apparent impedance calculation procedure for distance relaying of transmission line involving FACTS (Flexible AC Transmission System) devices, particularly the UPFC (Unified Power Flow Controller), between Kangjin and Jangheung in Korea. With the changes of UPFC's parameters, the measurement and protective range (trip boundaries) of the adaptive distance relay can also be changed. So, it is the most important part in the field of system protection to analyze the operating characteristic of relaying system. The presence of UPFC significantly affects the trip boundaries which are also adversely affected by fault resistance combined with remote end infeed. This paper presents the apparent impedance calculations and the distance relay setting characteristics for faults involving the UPFC in the KEPCO system.

• Advances in concrete construction
• /
• 제3권2호
• /
• pp.145-159
• /
• 2015

The evolution of nanotechnology provides materials with advance properties. It's a fast growing area of research to introduce the oxide nanoparticles into the cement pastes to improve their performance. The purpose of this paper is to review the effects of oxide nanoparticles (such as $SiO_2$, $TiO_2$, $Fe_2O_3$, $ZnO_2$, $Cr_2O_3$ and $Al_2O_3$) on both of hardened concrete properties (i.e., compressive strength, split tensile strength and flexural strength, water permeability, Abrasion resistance and pore structure of concrete) and fresh concrete properties (i.e., workability and setting time). Graphical representations of all these parameters were presented to facilitate the comparison of the effect of oxide nanoparticles on concrete processing. The paper also introduces some discussion about future work in this direction by identifying some open research area.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.70-75
• /
• 2013

The electrical separation joint as a filter circuit distributes the track circuit frequency. The electrical separation joint is classified into the interval where reinforcing bars are insulated and not insulated through the length of track circuit. In case of incorrectly setting up the length of electrical separation joint, the amplitude of current on the track circuit is not over standard current which is the standard of current on the track circuit and it effects on the close frequency on track circuit. Then, it makes an accident or makes a train not receive information for train control. In this paper, the electrical separation joint model is suggested and parameters are numerically calculated in the model. Moreover, the length of electrical separation joint is analyzed and is demonstrated by uisng Matlab and PSpice program.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.727-730
• /
• 1996

This paper presents a new on-line generator simulator which can be utilized for the control parameter setting of the exciter and the power system stabilizer (PSS). The proposed simulator equipped with A/D and D/A channels through which actual exciter and PSS can be connected. System parameters and disturbance sequence are easily programmed using friendly developed interface. The developed simulator is tested and verified by connecting a simple AVR implemented by op-amps.

• 센서학회지
• /
• 제8권3호
• /
• pp.259-264
• /
• 1999

The $CO_2$ measuring system using infrared sensor has the variance according to the temperature change. Therefore, the temperature compensation should be needed to obtain a reliable measurement. In this study, the sensor module consist of infrared $CO_2$ Sensor, IR Source, pipe and the heater and measuring system has amplifier, A/D converter and microprocessor. And we suggest a method to reduce the error by using the PID temperature control. We use optimum parameters setting of Ziegler & Nichols as well as PID temperature control algorithm for the temperature compensation. In this method, PID optimum parameter is set from dummy time(L) and maximum slope(R). As a result of using this PID temperature control, it is founded that it has the fast response and low steady state error. Therefore, it is certainly proved that this is very suitable algorithm to correct the error on measurement.

• Journal of Biosystems Engineering
• /
• 제17권2호
• /
• pp.171-176
• /
• 1992

This study was intended to develop the design theory of the threshing unit of a head-feeding rice combine. It may be applied for various combining capacities with different cutting widths and forward speeds. Design factors in the theoretical development are : (1) dimensions of the threshing drum, (2) tooth approching angle, (3) distance between the adjacent teeth on their spiral setting line, (4) number of spirals, and (5) total number of teeth on the drum. A computer simulation program was developed to predict the proper dimensions for the threshing drum and tooth arrangement. A simulation for the prospective combine with varied capacities was also demonstrated. The parameters analyzed in the developed design theory were shown to be consistent with those of existing combines.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.70-75
• /
• 2014

TMR(triple modular redundant) digital excitation system with simulator is developed for tuning optimal control parameters during commissioning test and coping with system faults rapidly. A new system which mocks up virtual generator, turbine, grid can simulate as if excitation system is connected to a real generator system by setting four switches. The maintenance crew using the simulator is able to test perfectly the phase controller rectifiers, field breaker, sequence relays as well as TMR controller of the excitation system. Commissioning and performance results about the excitation system with simulator is discussed. The trial product was installed and operated at a 500MW thermal power plant after the commissioning test.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.591-594
• /
• 2004

In this paper, The identity distinction of the moving objects using distance among hue normalization levels was proposed. Moving objects are detected by using difference image method and integral projection method to background image and objects image only with hue area. Hue information of the detected moving area are normalized by 24 levels from 0$^{\circ}$ to 360$^{\circ}$. A distance in between normalized levels with a hue distribution chart of the normalized moving objects is used for the identity distinction feature parameters of the moving objects. To examine proposed method in this paper, image of moving cars are obtained by setting up three cameras at different places every 1 km on outer motorway. The simulation results of identity distinction show that it is possible to distinct the identity a distance in between normalization levels of a hue distribution chart without background.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1149-1154
• /
• 2006

언제 어디서나 초고속으로 무선인터넷 사용을 목표로 하는 휴대인터넷 시스템이 곧 상용화될 예정이다. 휴대 인터넷 시스템은 서로 다른 특성을 가지고 있는 UGS, rtPS, nrtPS, BE 서비스들을 동시에 제공하므로 QoS를 고려한 효율적인 스케줄링 기법을 필요로 한다. 본 연구에서는 다양한 파라미터 값들에 대한 스케줄링 기법의 성능을 평가할 수 있는 시뮬레이터를 개발하였다. 모델을 변경하지 않고 시스템을 구성하는 다양한 특성치들을 쉽게 변경하면서 시뮬레이션을 실시할 수 있도록 일반화 한 것이 제안 시뮬레이터의 장점이다.

• 기술혁신연구
• /
• 제12권3호
• /
• pp.97-109
• /
• 2004

According to "structure-conduct-performance" paradigm in IO, market structure (concentration) determines conduct (R&D investments), and conduct yields market performance (ratio of price to marginal cost). Previous empirical studies on Schumpeter Mark I, II assumed that the explanatory variable (market structure) and the disturbance are uncorrelated in the R&D equation. In this situation, Ordinary Least Squares (OLS) estimates of the structural parameters are inconsistent, because the endogeneous variables (R&D and market structure) can be determined simultaneously. So, in this study, full information (or system methods) estimation is used to test Schumpeter hypothesis since joint estimation can as well bring efficiency gains in the seemingly uncorrelated regressions (SUR) setting.