• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.380-384
• /
• 1992

The position control of a pneumatic cylinder suing low cost on-off valves is studied. The valve control band(VCB) was proposed toget fast response and toprevent solenoid valves from unnecessary switching at the beginning of response. A learning algorithm was used to compensate the nonlinearity and complexity in mathematical modelling of pheumatic on-off controlled positioning systems. In this algorithm, the desired performance index and modified learning rate, were proposed to improvespeed and convergence of learning control. It is shown experimentally that the proposed algorithm is robust to changes of system parameters: the setting time less than 1.0 sec and the error bound of .+-. 0.1 mm can be obtained. The effects of supply pressure, size of switching valves and the effect of multiple valves are discussed, and computer simulation onthe dynamic performances of the pneumatic system is also presented.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.1
• /
• pp.41-52
• /
• 2012

Recently, FlexRay was developed to replace controller area network (CAN) protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. FlexRay network systems require correct synchronization and complex scheduling parameters. However, because platform configuration register (PCR) setting and message scheduling is complex and bothersome task, FlexRay is more difficult to implement in applications than CAN protocol. To assist a network designer for implementing FlexRay cluster, this paper presents an analysis of FlexRay platform configuration register and automatic generation program of PCR. To demonstrate the feasibility of the automatic generation program, we evaluated its performance using experimental testbed.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.179-187
• /
• 1999

The computer pattern sewing machine is an automatic sewing machine that is controlled by an input pattern. Even a novice can run this machine for various tasks fast and reliably such as sewing a button, a belt ring and an airbag, etc. The pattern processing software, which is the main software of this machine, is for editing and modifying pattern data by online teaching or off-line editing, setting up parameters, and calculate a moving distance of working area on the x-y axes. In this paper we propose an algorithm to generate pattern data for sewing by simplifying image data. The pattern data are composed of outline data like dot, line, circle, arc, curve, etc. We need converting this data into sewing data which involve sewing parameter, moving distance of working are an the x-y axes, thread, spindle speed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.3
• /
• pp.131-136
• /
• 2018

Harmony search (HS) is a relatively recently developed meta-heuristic optimization method imitating the music improvisation process where musicians improvise their instruments' pitches searching for a perfect state of harmony. In the conventional HS algorithm, it is necessary to determine the maximum number of iterations with some algorithm parameters. However, there is no criterion for determining the number of iterations, which is a very difficult problem. To solve this problem, a new method is proposed to perform the algorithm without setting the maximum number of iterations in this paper. The new method allows the algorithm to be performed until the desired tuning is achieved. To do this, a new variable bandwidth is introduced. In addition, the types and probability of harmonies composed of variables is analyzed to help to decide the value of HMCR. The performance of the proposed method is investigated and compared with classical HS. The experiments conducted show that the new method generally outperformed conventional HS when applied to seven benchmark problems.

• Steel and Composite Structures
• /
• v.25 no.5
• /
• pp.523-534
• /
• 2017

Cable-supported ribbed beam composite slab structure (CBS) is proposed in this study. As a new cable-supported structure, it has many merits such as long span availability and cost-saving. Inspired by the previous research on cable-supported structures, the fabrication and construction process are developed. Pre-stress design method based on static equilibrium analysis is presented. In the algorithm, the iteration convergence can be accelerated and the calculation result can be kept in an acceptable precision by setting a rational threshold value. The accuracy of this method is also verified by experimental study on a 1:5 scaled model. Further, important parameters affecting the mechanical features of the CBS are discussed. The results indicate that the increases of sag-span ratio, depth of the ribbed beam and cable diameter can improve the mechanical behavior of the CBS by some extent, but the influence of strut sections on mechanical behavior of the CBS is negligible.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.128-139
• /
• 2000

Environmental concerns and shortage of petroleum have promoted considerable interest in the use of alternate fuels in stationary diesel engine. In this study, a heavy-duty, intercooler-turbocharged 6-cylinder stationary diesel engine was converted into stationary gas engine fueled with propane or natural gas for the cogeneration plants. One of the most important factors in the combustion features of a stationary gas engine is the fuel composition and operating parameters in terms of compression ratio, spark advance, and engine loads. Experiments with different fuel gas and load conditions were carried out with combustion pressure analysis and NOx measurement. Combustion analysis based on P-$\theta$ diagrams was also investigated by means of combustion duration and cycle variation. Compression ratio is 10.0 and ignition timing is set by using the gasoline setting as a base line and advanced toward BTDC. The results show that fuel composition and spark advance have dominant effects on combustion and NOx characteristics at operating conditions.

• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.643-651
• /
• 2000

ATM network technology is generally used for the integration of multimedia services in high-speed Internet. ABR (Available Bit Rate) and UBR (Unspecified Bit Rate) service classes have been developed specifically to support data application. In this paper, through the result of simulation, we analyzed the effect of TCP data transmission performance by using FRR (Fast Retransmission and Recovery) and Nagle's Algorithm on the UBR service, and by adjusting EFCI switch parameter on the ABR service. As a result of our study, performance improvement of TCP over ATM network is observed by adjusting TCP parameters and setting of effective switch parameter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.3 no.3
• /
• pp.221-226
• /
• 2002

The SGR system which is the basis for setting Medicare conversion factor updates was enacted since 1992. The SGR sets a target rate of spending growth based on factors influencing medical costs. In our situation of Fee Contracts in Korea, there exist much conflicts with SGR. This article seeks how we can implement the SGR system successfully in Korea. The major points are estimation of real economic parameters, adjustment of prior estimation, consideration of important factors influencing medical costs.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.216-218
• /
• 2002

This study is the modeling of resistive type SFCLs. There was numerical modeling and simulation using EMTP in the conventional modeling of SFCL. The numerical modeling was presented an analysis of numerical characteristic of SFCL. And the modeling using EMTP was made up of the study for setting method of specific parameters of a SFCL. This paper proposes the model of resistive type superconducting fault current limiter using EMTDC(Electromagnetic transients for DC analysis program). The simulation schemes that can be applied to the utility network readily and cheaply under various conditions considering the sort of fault, the capacity of systems as well are strongly expected and emphasized among researchers.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.1
• /
• pp.95-104
• /
• 2005

A desirability function approach to a multiresponse problem is proposed considering process parameter fluctuation which may amplify the variance of response. It is called POE (propagation of error), which is defined as the standard deviation of the transmitted variability in the response as a function of process parameters. In order to obtain more robust process parameter setting, a new desirability function is proposed by considering POE as well as distance-to-target of response and response variance. The proposed method is illustrated using a rubber product case in Ribeiro et al. (2000).