• 제목/요약/키워드: Setting parameters

검색결과 508건 처리시간 0.026초

성인 포먼트 측정에서의 최적 세팅 구현: Praat software와 관련하여 (The implementation of Korean adult's optimal formant setting by Praat scripting)

  • 박지연;성철재
    • 말소리와 음성과학
    • /
    • 제11권4호
    • /
    • pp.97-108
    • /
    • 2019
  • 한국인 성인을 대상으로 최적의 포먼트 분석이 가능하도록 자동화된 프랏 스크립트를 구현하였다. 최적의 포먼트 분석이란 프랏에서 포먼트 분석 시 설정하는 2가지 세팅 파라미터(최대 포먼트, 포먼트 개수)를 조합하여 측정된 제1, 제2 포먼트의 편차합이 최소일 때를 가리킨다. 포먼트 분석의 신뢰성을 높이기 위해서는 성별이나 모음의 종류에 따라 LPC 차수를 다르게 설정해야 하는데 프랏 매뉴얼에서는 최대 포먼트 설정 값으로 남성 5,000 Hz, 여성 5,500 Hz, 측정개수는 5개를 권고한다. 그러나 이렇게 권고된 포먼트 세팅 설정이 한국어 모음에 대해서도 타당한지 검증이 필요하다. 본 연구에서 구현한 4가지 스크립트를 적용한 결과, 각 모음별 포먼트 산점도로 확인하였을 때 특히 여성의 경우 스크립트에 따라 측정된 포먼트 변이의 폭이 두드러지는 차이를 보였다. 포먼트 산점도와 통계 결과를 통해 linear_script와 qtone_script가 포먼트 측정에서 더 신뢰성이 높은 것을 알 수 있었다. Linear_script, qtone_script에서 최적의 세팅으로 설정된 최대 포먼트와 포먼트 개수의 데이터 경향성을 살펴보면, 전설 모음 [이, 에]의 경우 권고 설정보다 최대 포먼트 값은 높게, 포먼트 개수의 값은 적게 설정되었다. 반면 후설모음 [오, 우]의 경우, 권고 설정보다 최대 포먼트 값은 낮게, 포먼트 개수의 값은 많게 설정되는 것을 확인할 수 있었다.

체성감각 훈련이 뇌졸중 환자의 시공간적 보행요소 및 균형에 미치는 효과 (The Effects of Somatosensory Training on the Spatiotemporal Gait Parameters and Balance in Patients with Stroke)

  • 채정병;이문환
    • 대한물리의학회지
    • /
    • 제5권4호
    • /
    • pp.587-596
    • /
    • 2010
  • Purpose : This study was performed to investigate the effects of somatosensory training on the spatiotemporal gait parameters and balance in patients with stroke patients. Methods : 24 stroke survivors were allocated in this study, and randomly divided into experimental(n=12) and control group(n=12), independently. Experimental group was applied somatosensory training program plus conventional physical therapy, and control group was applied only conventional physical therapy. All subjects were administered for 30 minutes per day during 8 weeks(5 times a week). Results : Spatiotemporal parameters of gait were significant difference between pre and post intervention in experimental group, except of step length asymmetry ratio(SLAR) and single support time asymmetry ratio (SSAR)(p<.05). But control group had no statistical significance(p>.05). And also there was significant difference between experimental and control group(p<.05), except of cadence and SSAR(p>.05). Balance parameters were significant difference between pre and post intervention in experimental group(p<.05). But control group had no statistical significance(p>.05). And experimental timed up and go test was significantly decreased than control group(p<.05), but berg balance scale and functional reach test were not significant difference between experimental and control group(p>.05). Conclusion : This study was suggested that somatosensory training has effectiveness on the spatiotemporal gait parameters and balance in patients with stroke survivors. So this therapeutic intervention will be effectivelyapply to the stroke survivors in the clinical setting.

컴퓨터 비젼을 이용한 정밀 측정 장비의 줌 렌즈 캘리브레이션 (Zoom Lens Calibration for a Video Measuring System)

  • 한광수;최준수;최기원
    • 인터넷정보학회논문지
    • /
    • 제6권5호
    • /
    • pp.57-71
    • /
    • 2005
  • 본 논문에서는 컴퓨터 비전을 이용하는 정밀 측정 장비인 VMS(video measuring system)에서 줌을 서보 모터(servo motor)로 제어하는 자동화된 줌 렌즈를 보정하기 위한 효율적인 방법을 소개한다. VMS에서 사용하는 줌 렌즈는 초점과 조리개가 고정되어 있기 때문에 줌의 변화에 영향을 받는 이미지의 중심과 픽셀의 가로, 세로 크기에 대하여 보정한다. 줌 렌즈의 모든 줌제어 단계에 대하여, 모든 카메라 변수 값들을 계산하기 위해서는 많은 계산량과 저장공간이 필요하다. 이런 문제점들을 해결하기 위하여, 효율적인 계산과 저장공간을 위하여 최소 단계의 줌 단계에 대한 보정으로도 모든 영역의 줌 단계에 대한 보정 값들을 계산할 수 있는 방법을 사용해서 VHS에서 효율적이고 간단한 줌 렌즈 캘리브레이션 방법을 제안한다.

  • PDF

압전방식 초음파 치석제거기의 작업조건에 따른 치과주조용 합금의 삭제에 관한 연구 (The effect of working parameters on removal of casting gold alloy using a piezoelectric ultrasonic scaler with scaler tip in vitro)

  • 차국봉;김원경;이영규;김영성
    • Journal of Periodontal and Implant Science
    • /
    • 제39권2호
    • /
    • pp.139-148
    • /
    • 2009
  • Purpose: Ultrasonic scalers have been widely used for removing biofilm which is considered as major etiologic factor of periodontal disease. The purpose of this study was to evaluate the effect of working parameters of piezoeletric ultrasonic scaler with scaler tip (No. 1 tip) on casting gold alloy removal. Methods: Type III dental casting gold alloy (Firmilay$^{circledR}$, Jelenko Inc, CA, USA) was used as substitute for tooth substance. Piezoeletric ultrasonic scaler and No.1 scaler tip (P-Max$^{circledR}$, Satelec, France) were selected. The selected working parameters were mode (P mode, S mode), power setting (2, 4, 8) and lateral force (0.5 N, 1.0 N, 2.0 N). The effect of working parameters was evaluated in terms of ablation depth, ablation width and ablation area. Results: Mode influenced ablation depth and ablation area. Power also influenced ablation depth and ablation area. Especially, Power 2 and power 8 showed statistically significant difference. Lateral force had influence on ablation width, and 0.5 N resulted significant increase compared with 1.0 N and 2.0 N. Ablation depth was influenced by mode, power and lateral force and defect width was influenced by lateral force. Ablation area was influenced by mode and power. Conclusions: It can be concluded that the use of piezoelectric ultrasonic scaler with No. 1 scaler tip in S mode and high power may result in significant loss of tooth substance.

Field test and numerical study of the effect of shield tail-grouting parameters on surface settlement

  • Shao, Xiaokang;Yang, Zhiyong;Jiang, Yusheng;Yang, Xing;Qi, Weiqiang
    • Geomechanics and Engineering
    • /
    • 제29권5호
    • /
    • pp.509-522
    • /
    • 2022
  • Tail-grouting is an effective measure in shield engineering for filling the gap at the shield tail to reduce ground deformation. However, the gap-filling ratio affects the value of the gap parameters, leading to different surface settlements. It is impossible to adjust the fill ratio indiscriminately to study its effect, because the allowable adjustment range of the grouting quantity is limited to ensure construction site safety. In this study, taking the shield tunnel section between Chaoyanggang Station and Shilihe Station of Beijing Metro Line 17 as an example, the correlation between the tail-grouting parameter and the surface settlement is investigated and the optimal grouting quantity is evaluated. This site is suitable for conducting field tests to reduce the tail-grouting quantity of shield tunneling over a large range. In addition, the shield tunneling under different grouting parameters was simulated. Furthermore, we analyzed the evolution law of the surface settlement under different grouting parameters and obtained the difference in the settlement parameters for each construction stage. The results obtained indicate that the characteristics of the grout affect the development of the surface settlement. Therefore, reducing the setting time or increasing the initial strength of the grout could effectively suppress the development of surface subsidence. As the fill ratio decreases, the loose zone of the soil above the tunnel expands, and the soil deformation is easily transmitted to the surface. Meanwhile, owing to insufficient grout support, the lateral pressure on the tunnel segments is significantly reduced, and the segment moves considerably after being removed from the shield tail.

Use of "Diagnostic Yield" in Imaging Research Reports: Results from Articles Published in Two General Radiology Journals

  • Ho Young Park;Chong Hyun Suh;Seon-Ok Kim
    • Korean Journal of Radiology
    • /
    • 제23권12호
    • /
    • pp.1290-1300
    • /
    • 2022
  • Objective: "Diagnostic yield," also referred to as the detection rate, is a parameter positioned between diagnostic accuracy and diagnosis-related patient outcomes in research studies that assess diagnostic tests. Unfamiliarity with the term may lead to incorrect usage and delivery of information. Herein, we evaluate the level of proper use of the term "diagnostic yield" and its related parameters in articles published in Radiology and Korean Journal of Radiology (KJR). Materials and Methods: Potentially relevant articles published since 2012 in these journals were identified using MEDLINE and PubMed Central databases. The initial search yielded 239 articles. We evaluated whether the correct definition and study setting of "diagnostic yield" or "detection rate" were used and whether the articles also reported companion parameters for false-positive results. We calculated the proportion of articles that correctly used these parameters and evaluated whether the proportion increased with time (2012-2016 vs. 2017-2022). Results: Among 39 eligible articles (19 from Radiology and 20 from KJR), 17 (43.6%; 11 from Radiology and 6 from KJR) correctly defined "diagnostic yield" or "detection rate." The remaining 22 articles used "diagnostic yield" or "detection rate" with incorrect meanings such as "diagnostic performance" or "sensitivity." The proportion of correctly used diagnostic terms was higher in the studies published in Radiology than in those published in KJR (57.9% vs. 30.0%). The proportion improved with time in Radiology (33.3% vs. 80.0%), whereas no improvement was observed in KJR over time (33.3% vs. 27.3%). The proportion of studies reporting companion parameters was similar between journals (72.7% vs. 66.7%), and no considerable improvement was observed over time. Conclusion: Overall, a minority of articles accurately used "diagnostic yield" or "detection rate." Incorrect usage of the terms was more frequent without improvement over time in KJR than in Radiology. Therefore, improvements are required in the use and reporting of these parameters.

용액에 따른 자동분주기의 분주능력 평가와 분주력 향상 실험 (Pipetting Stability and Improvement Test of the Robotic Liquid Handling System Depending on Types of Liquid)

  • 백향미;김영산;윤선희;허의성;김호신;류형기;이귀원
    • 핵의학기술
    • /
    • 제20권2호
    • /
    • pp.62-68
    • /
    • 2016
  • 1. 목적 자동분주기를 이용하여 검사한 Cyclosporine검사에서 표준액들이 curve를 벗어나고, 결과값의 재현성이 크게 떨어지는 것이 발견되었다. Cyclosporine검사는 다른 검사와 차이점이 methanol과 전혈을 혼합 후 원심분리 하여 methanol 추출액을 사용하여 검사를 한다는 것이다. 검사 결과 이상의 원인이 methanol 사용에 의한 것으로 파악되어 본 실험을 시작하였다. 본원에서 사용하는 분주기는 Perkin Elmer 사의 Multiprobe II plus 로, 분주하는 액체의 점도, 샘플링 tip의 size, 사용하는 모터의 속도에 따라 여러 설정값을 조정하라고 안내되어 있을 뿐 정확한 지침은 없었다. 이에 사용하는 액체별 분주성능을 측정하고 최적의 분주성능을 위한 설정값을 찾기 위해 연구하였다. 2. 대상 및 방법 분주력 측정을 위해 4가지 용액(water, serum, methanol, PEG 6000(25%))와 $TSH^{125}I$ tracer (515 kBq)을 사용 하였고, 실제 결과 값을 비교하기 위해 2016년 1월에 본원에 검사 의뢰된 Cyclosporine검체 29개를 측정하였다. 4가지의 용액을 multi pipette을 이용하여 각각 $400{\mu}l$ 분주하고 tracer $100{\mu}l$씩을 섞어 용액별로 8개의 검체를 준비하였다. 준비된 sample을 분주기로 $100{\mu}l$씩 분주하여 CPM을 측정하고, 용액별로 CV(%)를 계산하였다. 그리고 분주기의 air gap, 분주속도와 지연시간을 변경한 후 다시 분주하여 측정한 CPM을 CV(%)로 계산하여 설정 값 변경에 따른 CV(%)값의 변화를 측정하여 최적의 설정 값을 찾는다. Cyclosporine검체 29개를 (1)manual검사 (2)기존 설정 값으로 검사 (3)수정한 설정값으로 검사 했을 때의 결과를 비교하였다. 용액별 분주력 평가는 CV(%)를 이용하여 계산하였고, 실제 검사 결과 값의 비교는 manual검사 결과를 기준으로 기존 설정 값으로 검사 했을 때, 수정한 설정 값으로 검사 했을 때의 결과 값을 Difference(%)와 상대오차(%Relative error : %RE)로 비교해 보았다. 3. 결과 4가지 용액과 tracer를 섞어 분주한 CPM의 CV(%)는 water 0.88, serum 0.95, methanol 10.22, PEG는 0.68로 methanol을 제외한 용액들은 1% 이내였으나, methanol은 CPM 차이가 두드러졌다. methanol 분주를 기존 설정 값인 Transport air gap 0에서 2와 5로 변경하여 검사 시 CV(%)는 각각 20.16, 12.54, System air gap 0에서 2와 5로 변경 시 8.94, 1.36으로 나타났다. System air gap 2, Transport air gap 2로 변경 시 CV(%)는 12.96, System air gap 5, Transport air gap 5로 변경 시 1.33 이었고, Dispense speed를 300에서 100으로 변경 시 CV(%)는 13.32, Dispense delay를 200에서 100으로 변경 시는 13.55인 것으로 나타났다. 분주기를 이용하여 기존설정 값으로 검사 시에는 manual검사 결과 값에 비해 평균 99.44%증가 하였고, 상대오차는 93.59%로 나타났다. 수정된 설정 값(System air gap 0에서 5로 변경, 다른 설정은 기존과 동일)으로 검사 했을 때는 manual검사 결과 값에 비해 결과가 평균 6.75% 증가 하였고, 상대오차는 5.10%로 상대오차의 허용기준치 10%에 비하여 양호한 결과가 나왔다. 4. 결론 Transport air gap, Dispense speed, Delay time을 조정하였을 때는 CV(%)가 증가하였고, System air gap을 조정 하였을 때 CV(%)가 현저하게 감소하였다. 실제 검사결과에서도 이를 확인 할 수 있었다. methanol을 이용한 Cyclosporine검사 kit는 올해 2월에 단종이 되었지만, 분주기를 사용함에 있어 용액에 따른 분주성능에 차이가 있을 수 있음을 염두해 두어야 하고 새로운 용액을 분주해야 할때는 미량저울로 분주량을 측정하거나 CPM으로 분주성능을 측정하여 해당 용액이 분주기를 사용함에 적절한지 검증 후 사용하여야 할 것으로 사료되어 본 실험결과를 보고하고자 한다.

  • PDF

노인에서 Berg 균형 척도, 보행 변수, 그리고 넘어짐과의 관계 (Correlations Among the Berg Balance Scale, Gait Parameters, and Falling in the Elderly)

  • 이현주;이충휘;유은영
    • 한국전문물리치료학회지
    • /
    • 제9권3호
    • /
    • pp.47-65
    • /
    • 2002
  • This study examined the correlations among the Berg Balance Scale, which is a clinical tool used to evaluate balance ability, spatiotemporal parameters of gait, and falling; determined the parameters most closely related to falling; and identified a discriminatory parameter and its predictability. Thirty-four subjects aged 72 to 92 years participated in this study. Following a questionnaire survey about falling, the Berg Balance Scale and spatiotemporal parameters of gait were measured. The results revealed that the incidence of falls increased with aging and an accompanying reduction in the flexion range of motion of the hip joint. The gait characteristics of elderly people who fell easily included a slower walking speed, shorter stride, and longer stance time than other elderly. When the cutoff score was set at 45, the Berg Balance Scale was able to identify correctly those individuals who truly have experience of falling than when the cutoff score was set at 39. But when the cutoff score was set at 39, the scale's specificity identifying correctly those individuals who truly have not experience of falling was higher than at the cutoff score of 45. Therefore, the Berg Balance Scale is an appropriate screening method in a clinical setting for the early detection of elderly people at risk of falling. In conclusion, elderly people with a Berg Balance Scale score. below 45 are the most likely to fall owing to their decreased balance ability.

  • PDF

마코프체인 몬테카를로 방법을 이용한 에너지 저장 장치용 배터리의 잔존 수명 추정 (Remaining Useful Life Estimation of Li-ion Battery for Energy Storage System Using Markov Chain Monte Carlo Method)

  • 김동진;김석구;최주호;송화섭;박상희;이재욱
    • 대한기계학회논문집A
    • /
    • 제40권10호
    • /
    • pp.895-900
    • /
    • 2016
  • 리튬 이온 배터리의 잔존수명 추정은 품질보증, 운전계획, 교체주기 파악 등을 위해 활용된다는 점에서 그 필요성이 점점 커지고 있다. 본 논문에서는 에너지 저장 장치용 배터리의 잔존 수명을 단일지수 용량열화 모델과 마코프체인 몬테카를로(MCMC) 방법을 이용하여 추정한 결과를 제시한다. MCMC방법은 사전 정보가 제대로 주어지지 않았을 때, 추정결과가 모델 초기값과 입력 설정값에 따라 크게 변하게 되는 단점이 있어, 실제 현장에서 배터리 모델과 추정법에 익숙하지 않은 사용자가 활용하는데 어려움이 있다. 이러한 어려움을 극복하기 위해, 본 논문에서는 베이지안 추론법의 이론식을 전역 탐색하여 구한 이론값과 MCMC 추정값을 비교해서, 초기값과 설정값을 결정하는 과정을 제안한다.

Characteristics of Static Balance in Patients With Adolescent Idiopathic Scoliosis

  • Shin, Seung-Sub;Woo, Young-Keun
    • 한국전문물리치료학회지
    • /
    • 제13권4호
    • /
    • pp.47-55
    • /
    • 2006
  • The purpose of this study was to compare the static balance of standing position between adolescent idiopathic scoliosis (AIS) and a normal group that were aged-matched. There were forty subjects included in this study. Twenty-seven healthy subjects (age, $13.9{\pm}1.2$ yrs; height, $161.9{\pm}7.5$ cm; weight, $52.2{\pm}7.7$ kg) and thirteen AIS subjects (age, $14.2{\pm}2.2$ yrs; height, $161.5{\pm}8.7$ cm; weight, $48.1{\pm}8.1$ kg) were participated in the study. The thirteen subjects in the AIS group had a major Cobb angle between $20.1^{\circ}$ and $49^{\circ}$. Each group was tested with the Balance Performance Monitor (BPM). The parameters for static balance were sway area, sway path, max velocity, mean balance, anterior-posterior angle, and left-right angle of each group with their eyes opened and again with their eyes closed. Both sides of the forward reach test and the lateral reach test were also performed on each group. Results from the BPM tested showed significantly increases in all parameters of static balance with those patients with AIS under the conditions where eyes were opened and closed. In the right and left forward reach test, there was no significant difference between normal and AIS groups. However, in the lateral reach test with right and left direction, there were significant differences between normal and AIS groups. For the normal subjects, there were significant differences in the parameters with sway path and anterior-posterior sway angle between the eyes opened and closed. However, there were no significant differences in the all parameters between eyes opened and closed for the AIS subjects. These results suggest that, balance programs could be used in the rehabilitation setting for intervention of AIS and evaluation of AIS. Further study is needed to measure many patients with AIS and other functional balance scales for clinical application.

  • PDF