• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.2
• /
• pp.35-46
• /
• 2023

The transplanting period limit considering the rice yield in the Dague region, the inland plains of Gyeongsangbuk-do, was estimated to be July 15^th for early and mid-maturing rice and July 5^th for mid-late maturing rice. However, as the transplanting time was delayed, the characteristics of rice starch changed significantly. In the case of early and mid-maturing rice varieties, the starch granule size increased as the transplanting time was delayed; the opposite tendency was observed for mid-late maturing varieties. In all mature rice types, the late transplanting resulted in a longer pasting time and a higher pasting temperature. In addition, the peak viscosity, breakdown, and gelatinization temperature were significantly lowered, the relative crystallinity degree decreased, and the setback was significantly increased. In the case of Ilpum, a mid-late maturing rice variety, the distribution of amylopectin short chains tended to increase when rice was transplanted on June 30^th.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.393-397
• /
• 2004

Rice was steeped at elevated temperatures of $40,\;50,\;or\;60^{\circ}C$ for 2 hr, and physicochemical properties of starches isolated from wet-milled rice flour were investigated. Steeping at elevated temperatures slightly decreased lightness of rice starch, while increased yellowness and redness. Average granule size of rice starch was decreased by steeping treatment. Swelling power and solubility increased as temperature increased. Starch from rice steeped at $40^{\circ}C$ displayed highest swelling power and solubility. Differential scanning calorimetry data of starch obtained from steeped rice at $60^{\circ}C$ showed increased onset and peak temperatures, with narrower gelatinization temperature range, suggesting partial annealing effect. Pasting properties of starch measured by Rapid Visco-Analyzer indicated increased peak viscosity due to rice steeping at $40^{\circ}C$. Peak and breakdown viscosities decreased at $50\;and\;60^{\circ}C$, whereas setback and final viscosities increased.

• The Korean Journal of Food And Nutrition
• /
• v.16 no.4
• /
• pp.417-422
• /
• 2003

Addition of whole soy flour(WSF) to wheat flour(WF) was studies for its effects on dough and noodle characteristics. The WF used was medium grade of strength and WSF was a fine flour of 350 mesh. The addition ratio of WSF to. n was up to 20%. The dough properties and textural properties of wet and cooked noodles were measured with using Farinograph, Amylograph and Rheometer. Farinogram data showed the minimum dough development time and stability at 6% addition of WSF. Amylograph data of initial pasting temperature and time were increased while the maximum and final viscosity and setback were decreased as the WSF added more to W The initial pasting temperature of 2.0∼6.0% WSF added flour were comparable to 100% WF eventhough viscosity was almost half of WF. The water absorption capacity was increased from 81.6% to 92.3% at 6.0% WSF and then decreased as the addition ratio of WSF increased. The extensibility of dough showed a maximal value at 8.0% WSF addition. Strengthness and hardness of wet and cooked noodle were increased to the heighest measurement as the WSF added up to 6.0% followed by a steady decrease thereafter. It was also found that WSF addition resulted an increase in adhesiveness of wet noodle and decrease in hardness and strengthness of cooked noodle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1819-1825
• /
• 2015

This study was carried out to investigate the effect of hydrocolloids [hydroxypropylmethyl cellulose (HPMC), xanthan gum (XG), guar gum (GG), and glucomannan (GM)] on the physicochemical properties of bread flour dough containing rice flour. In amylograph analysis, the significantly lowest gelatinization temperature was obtained in dough with XG (P<0.05). XG revealed the highest maximum viscosity while GM revealed the lowest. In viscograph test, the lowest gelatinization temperature and maximum viscosity showed the same result as in the amylograph. Breakdown value was also highest in dough containing XG, but lowest in the control and dough containing HPMC. Setback value was highest in dough containing HPMC, but lowest in dough containing XG. In farinograph analysis, consistency was greatest in dough with HPMC and XG. Hydrocolloids affected water absorption, which was highest in dough containing GM. Development times of dough containing HPMC and XG were low. Stability was lowest in dough with XG. Degree of softening was reduced in dough containing HPMC and GG compared to the control but increased in dough containing XG and GM. Dough containing HPMC and GG showed the largest volume at 3 h of fermentation. Dough with HPMC showed the lowest pH value. Hydrocolloids in this study affected physicochemical properties of dough.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.580-586
• /
• 1996

Gelatinization behavior and morphology of epichlorohydrin-crosslinked potato starches (XPs) were investigated. Native potato starch showed a very steep single stage swlling pattern, but crosslinked starches showed various patterns with the degree of crosslinking. Swelling power, solubility and light transmittance were reduced drastically as the degree of crosslinking increased. Brabender initial pasting temperature and peak temperature of crosslinked starches increased because the crosslinking reinforces the intermolecular net work of the starches. Although the swelling of the potato starch granule was inhibited by crosslinking as compared to that of the native one, Brabender peak viscosities (6.5% w/v, db) were on the order of 2,500 units for the native potato starch, 3,700 for the XP with 2.300 anhydroglucose units per crosslinking (AGU/CL) and 3,400 for the XP with 2,100 AGU/CL, due to the decreased breakdown of the swollen granule resulting from the resistance to heat and shear. The XP with 1,900 AGU/CL, however, did not show the peak viscosity and the viscosity was on the order of 500 units because of the excessive unhibition of the swelling. Unlike the native potato starch, 6.5%(m/v, db) pastes of the crosslinked potato starches could form gels, which could be predicted from the Brabender setback and consistency index. When the degree of crosslinking is low, random contraction and radial swelling of the granule was possible. As the degree of crosslinking increased, morphological change became similar to the single dimensional tangential swelling observed from the lenticular wheat starch. These morphological change during heating in excess water explained the gelatinization behaviors of crosslinked starches tested.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.361-367
• /
• 2012

The purpose of this study was to investigate the rheological properties of pound cake cotaining ginger powder. Ginger powder was added to pound cake bases at 1, 3 and 5%. concentrations. The physical properties of the pound cake with ginger powder were tested by rapid viscoanalyzer (RVA), a farinogram, and an alveogram. The falling numbers were increased with the increment of ratio of ginger powder, but they did not show a significant difference. The higher quantity of ginger powder with cake flour made MTI value the higher and these results showed typical cake flour. The farinogram quality number did not show a significant difference between the control and the other samples. The highest initial gelatinization temperature was that of the control, and the increment of ginger powder on the cake flour made initial gelatinization temperature lower. The peak and final viscosities, however, were higher with the quantity increment of ginger powder. The holding strength did not show a significant difference. As the 5% - ginger-powder pound cake showed the highest setback, it was predicted that the addition of ginger powder to the flour would not play the role of anti-retrogradation. The Pmax and L value of the alveogram decreased with the ginger powder increments.

• Korean Journal of Food Science and Technology
• /
• v.46 no.3
• /
• pp.341-346
• /
• 2014

This study was conducted to evaluate the effect of trehalose on the rheological properties of bread flour dough. Farinographic and viscographic properties, pH, total titratable acidity (TTA), and fermentation power were analyzed for flour dough rheology. Flour dough containing trehalose showed greater water absorption capacity and longer development time. However the stability, degree of softening, and farinograph quality number (FQN) were lower for the trehalose-containing flour dough, however, these factors decreased with increasing amounts of trehalose. Trehalose did not affect the beginning of gelatinization temperature and maximum viscosity temperature of flour. The maximum viscosity was the lowest with 6% trehalose, the end of final holding period, breakdown and setback values decreased with increasing amounts of trehalose. Flour dough with 4% trehalose had the lowest pH value for 120 min fermentation at $30^{\circ}C$, and the highest TTA value. Addition of 4% and 6% trehalose showed larger fermentation volume of dough than the control. The results suggested that trehalose positively affected the rheological properties of flour dough such as bread volume, softness, and staling delay.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.382-387
• /
• 2011

Physicohemical properties of dual-modified rice starches, cross-linked (with $POCl_{3}$) and hydroxypropylated (with propylene oxide) rice starches, were studied. Rice starch was cross-linked using $POCl_{3}$ (0.005%, 0.02% (v/w)) at 45$^{\circ}C$ for 2 hr and then hydroxypropylated using propylene oxide (2%, 6%, 12% (v/w)) at 45$^{\circ}C$ for 24 hr, respectively. Swelling power, solubility, thermal properties (DSC) and pasting properties (RVA) of cross-linked and hydroxypropylated (CLHP) rice starches were determined. Swelling power of CLHP rice starch increased at relatively lower temperature than native rice starch. Solubility of CLHP rice starch was lower than that of native rice starch. Peak viscosity of CLHP rice starch was lower than that of native starch while holding strength and final viscosity were increased with modification. Breakdown value was lower and setback value was higher than native rice starch. DSC thermal transitions of CLHP rice starch shifted toward lower temperature. Amylopectin-melting enthalpy of CLHP rice starch decreased, whereas it was not affected by the amount of $POCl_{3}$.

• Korean journal of food and cookery science
• /
• v.17 no.4
• /
• pp.309-315
• /
• 2001

The effects of soaking time of nonwaxy rice and particle size of rice flour on the properties of nonwaxy rice flour after steeping at room temperature were investigated. Nonwaxy rice was soaked at 20$^{\circ}C$ for 0, 1, 12, or 24hr, dried at room temperature and milled. Nonwaxy rice flours were passed through 45 mesh or 100 mesh sieve, and were compared for the properties depending on the particle size and soaking time. The particles of rice flour were separated into 10$\mu\textrm{m}$∼30$\mu\textrm{m}$ and 40$\mu\textrm{m}$∼80$\mu\textrm{m}$ groups, and the amount of large particle size(40$\mu\textrm{m}$∼80$\mu\textrm{m}$) was greater in the flour sieved through 45 mesh than 100 mesh sieve. The protein and ash contents decreased and amylose contents increased as the soaking time increased. The water-binding capacity increased rapidly up to 1 hr of soaking and increased slowly thereafter. The swelling power and the solubility increased with temperature rising in the range of 65$^{\circ}C$∼95$^{\circ}C$, and these two properties increased rapidly up to 12 hr of soaking. Peak viscosity and breakdown of the pastes prepared with 12 hr-soaked nonwaxy rice flour were higher than those with 1 hr-soaked ones, while the setback and viscosity at 95$^{\circ}C$ of 12 hr-soaked ones were lower than 1hr-soaked ones.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.27-37
• /
• 1994

To catch the relative importance of varietal and environmental variation in various grain quality components associated with palatability of cooked rice, grain appearance, milling recovery, several physicochemical properties of milled rice and texture or eating quality of cooked rice for rice materials of five japonica cultivars, produced at four locations of the mid-mountainous and alpine area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal and locational variations were detected in 1000-grain weight, amylose content, K/Mg ratio, gelatinization temperature, peak viscosity, breakdown and setback viscosities as compared with variety x location interaction variation. Also, marked locational variations were recongnized in milling recovery from rough to brwon rice, alkali digestibility and protein content, and significant varietal variation was caught in stickiness /hardness ratio of cooked rice. The variety x location interaction variation was especially large in quality components of grain appearance and ripening, palatability of cooked rice and consistency viscosity. One thousand kernel weight was heaviest in Jinbuolbyeo and Odaebyeo, and the unfilled grain ratio was lowest in Jinbuolbyeo. Odaebyeo showed slightly' lower ratio of intact and clear milled rice because of more chalky rice kernels compared with other cultivars. Amylose content of Jinbuolbyeo and Sobaegbyeo was about 1% lower than that of others and K/Mg ratio of Odaebyeo was the lowest one among rice materials. Odaebyeo, Sobaegbyeo and Jinbuolbyeo revealed significantly low gelatinization temperature and setback viscosity while high peak and breakdown viscosities. Cholwon rice showed the greatest kernel weight, good grain filling but lowest ratio of intact and clear milled rice while Jinbu rices exhibited the highest milling recovery from rough to brown rice and ratio of sound milled rice. Amylose content of milled rice in Jinbu rices was about 2-3% lower than those in other locations. Protein content of polished rice was about 1% lower in rice materials of middle zone than those of southern part of Korea. K/Mg ratio of milled rice was highest in Jinbu rice and potassium content was slightly higher in the rice materials of middle region than in those of southern region. Alkali digestion value and gelatinization temperature of polished rice was markedly high in Jinbu rices as compared with other locations. Breakdown viscosity was hightest in Chlown rices and next higher with the order of Hwaso>Unbong>Jinbu rices, and setback viscosity was the quite contrary tendency with breakdown. The stickiness /hardness ratio of cooked rice was relatively higher value in Cholwon rices than in the others and the palatability of cooked rice was a little better in Unbong and Cholwon rices than in Jinbu and Hwaso rices, although variety x location interaction variation was large. The rice materials can be classified largely into two groups of Jinbu and the others by the distribution on the plane of 1st and 2nd principal components (about 60% of total informations) contracted from twelve grain quality properties closely associated with eating quality of cooked rice. Also, Jinbu and the other rices were divided into two and three rice groups respectively. Varietal variation of overall rice quality was smallest in Hwaso. The most superior rice group in overall quality evaluation included Odaebyeo produced at Cholwon, Unbong and Hwaso, and Sobaegbyeo grown at Unbong