• 한국의류학회지
• /
• 제30권4호
• /
• pp.615-622
• /
• 2006

A tool to evaluate the subjective wearing comfort of caps from the objective measurement of pressure was developed. Comfortable Fittability Index(C.F.I) and Holding Power(HP) were defined to represent the subjective wearing comfort of caps. As a preliminary step to define the Comfortable Fittability Index(C.F.I), average pressure, pressure distribution, standard deviation of pressure were obtained and subjective sensation were evaluated by wearing caps. Also Holding Power(HP) was estimated from wind tunnel testing. Two sets of caps were evaluated, one set made of elastic fabric(F-caps) and the other set made of non-elastic fabric(S-caps). F-caps begin to be taken off by the higher wind velocity and thus exhibited higher values of Holding Power. On the other hand, F-caps exerted lower average pressure, narrower pressure distribution, smaller standard deviation.

• Nuclear Engineering and Technology
• /
• 제19권1호
• /
• pp.10-21
• /
• 1987

극한적인 열제거 기능 상실사고인 급수관 파열사고에 대한 불확실성 해석을 반응표면방법과 Monte Carlo모사를 이용해서 원자력 1호기에 대하여 수행하였다. 여러번의 RELAP4/MOD6를 이용한 급수관 파열사고 해석을 통해 불확실성 해석의 Data Base를 마련하였으며, 비교 목적으로 평가모형 계산도 수행하였다. 급수관 파열사고 이후의 원자로 냉각재계통 최대 압력에 미치는 영향을 조사비교하기 위해 2증류의 입력 Set에 대한 반응표면방법이 활용되었다. 첫 Set는 6개의 주요 발전소 운전변수로 구성되며, 둘째 Set는 5개 주요 모형변수로 구성된다 결과의 비교 분석을 통해 모형변수의 불확실성 이 최대 압력에 미치는 영 향이 운전변수 불확실성의 영향보다 매우 큰 것이 밝혀졌고, 최대 압력 증가의 약 9%에 해 당되는 여유도 개선도 확인되었다. 또한, 평가모델에서 인정되고 있는 초기 냉각재 노심입구 온도에 대한 가정은 잘못된 것으로 밝혀졌다.

• 멤브레인
• /
• 제7권2호
• /
• pp.95-109
• /
• 1997

Active layer의 형성법에 따른 첫번째 모듈 set와 두번째 모듈 set 사이의 성능변화가 축방향 속도와 용질 농도변화를 통하여 각 모듈 set별로 비교, 고찰되었다. 모든 실험들은 같은 transmembrane pressure와 막면적당 에너지 소모하에서 동시에 수행되었다. 첫번째 모듈 set에 대해서 Dean vortices가 존재하는 나선형 모듈과 Dean vortices가 없는 선형모듈로 수행된 모든 비교 실험에서 용질 flux와 투과계수는 vortex flow의 경우 훨씬 큰 값을 보였다. 두번째 모듈 set에 대해서 순수에 대한 두 모듈의 투과계수는 다른 값을 보이고 있으며 선형 모듈의 투과계수가 나선형 모듈에 비해 약 150% 높은 것으로 나타났다. 이는 두 모듈의 막이 완전히 달라졌음을 보여준다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.177-185
• /
• 2022

Hydrogen risk in the containment filtered venting system (CFVS) vessel was analyzed, considering operation pressure and modes with the effect of PAR and accident scenarios. The CFVS is to depressurize the containment by venting the containment atmosphere through the filtering system. The CFVS could be subject to hydrogen risk due to the change of atmospheric conditions while the containment atmosphere passes through the CFVS. It was found that hydrogen risk increased as the CFVS opening pressure was set higher because more combustible gases generated by Molten Core Concrete Interaction flowed into the CFVS. Hydrogen risk was independent of operation modes and found only at the early phase of venting both for continuous and cyclic operation modes. With PAR, hydrogen risk appeared only at the 0.9 MPa opening pressure for Station Black-Out accidents. Without PAR, however, hydrogen risk appeared even with the CFVS opening set-point of 0.5 MPa. In a slow accident like SBO, hydrogen risk was more threatening than a fast accident like Large Break Loss-of-Coolant Accident. Through this study, it is recommended to set the CFVS opening pressure lower than 0.9 MPa and to operate it in the cyclic mode to keep the CFVS available as long as possible.

• Journal of Biosystems Engineering
• /
• 제33권6호
• /
• pp.438-445
• /
• 2008

The purpose of this study was to develop a measurement model based on PLS (Partial least square) method for blood pressures. Measurement system for blood pressure signals consisted of pressure sensor, va interface and embedded module. A mercury sphygmomanometer was connected with the measurement system through 3-way stopcock and used as reference of blood pressures. The blood pressure signals of 20 subjects were measured and tests were repeated 5 times per each subject. Total of 100 data were divided into a calibration set and a prediction set. The PLS models were developed to determine the systolic and the diastolic blood pressures. The PLS models were evaluated by the standard methods of the British Hypertension Society (BHS) protocol and the American Association for the Advancement of Medical Instrumentation (AAMI). The results of the PLS models were compared with those of MAA (maximum amplitude algorithm). The measured blood pressures with PLS method were highly correlated to those with a mercury sphygmomanometer in the systolic ($R^2=0.85$) and the diastolic blood pressure ($R^2=0.84$). The results showed that the PLS models were the effective tools for blood pressure measurements with high accuracy, and satisfied the standards of the BHS protocol and the AAMI.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.17-29
• /
• 2004

Internal waves are computed using a ghost fluid method on an unstructured grid. Discontinuities in density and dynamic pressure are captured in one cell without smearing or oscillations along a multimaterial interface. A time-accurate incompressible Navier-Stokes/Euler solver is developed based on a three-point backward difference formula for the physical time marching. Artificial compressibility is introduced with respect to pseudotime and an implicit method is used for the pseudotime iteration. To track evolution of an interface, a level set function is coupled with the governing equations. Roe's flux difference splitting method is used to calculate numerical fluxes of the coupled equations. To get higher order accuracy, dependent variables are reconstructed based on gradients which are calculated using Gauss theorem. For each edge crossing an interface, dynamic pressure is assigned for a ghost node to enforce the continuity of total pressure along the interface. Solitary internal waves are computed and the results are compared with other computational and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.83-86
• /
• 2005

This paper proposed a hydraulic pump system which uses a variable SR drive and constant capacity pump. The base and maximum speed, torque are determined from displacement capacity of the pump and maximum pressure. The drive system is set to have a minimum power consumption having hydraulic preset pressure, which is operated within a maximum capacity and maximum preset pressure. This is achieved by controlling motor speed and power with feedback signal of pressure of the hydraulic pump. A 2.2kw, 12/8-pole SR motor and DSP based digital controller are designed and prototype drive system is manufactured. The proposed variable speed SR drive system is simulated and tested with experimental set-up. The test results show that the system has some good features such as high efficiency and high response characteristics.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.49-55
• /
• 2016

This paper analyzed a root cause of abnormality in the temperature and vibration at generator-side bearing of motor generator set (MG Set), which is a power supply system to control element drive mechanism (CEDM) of nuclear power plants (NPPs), and modified the design of roller-type and sealing method to improve the abnormalities. From the inspection of MG Set and analysis of temperature variation during service, it was found that the abnormal temperature transition was basically associated with original design of generator-side bearing, whose roller was axially restrained by inner race, and that the abnormal vibration level was caused by inserting small chips of cage and V-ring, which were generated due to the abnormal temperature transition at roller bearing. Type of bearing and sealing method were modified based on these analyses. The temperature and vibration level measured at roller bearing showed that the modifications clearly improved the operational stability of MG Set.

• Wind and Structures
• /
• 제29권2호
• /
• pp.111-127
• /
• 2019

The tapered and set-back type of unconventional designs have been used earlier in many buildings. These shapes are aerodynamically efficient and offer a significant amount of damping against wind-induced forces and excitations. Various studies have been conducted on these shapes earlier. The present study adopts a hybrid approach of turbulence modelling i.e., Detached-eddy Simulation (DES) to investigate the effect of height modified tapered and set-back buildings on aerodynamic forces and their sensitivity towards pressure. The modifications in the flow field around the building models are also investigated and discussed. Three tapering ratios (T.R.=(Bottom width- Top width)/Height) i.e., 5%, 10%, 15% are considered for tapered and set-back buildings. The results show that, mean and RMS along-wind and across-wind forces are reduced significantly for the aerodynamically modified buildings. The extent of reduction in the forces increases as the taper ratio is increased, however, the set-back modifications are more worthwhile than tapered showing greater reduction in the forces. The pressure distribution on the surfaces of the buildings are analyzed and in the last section, the influence of the flow field on the forces is discussed.

• 에너지공학
• /
• 제11권2호
• /
• pp.122-129
• /
• 2002

액체금속로의 소듐-물 반응사고에 따른 압력거동 분석을 위하여 한국원자력연구소 KALIMER 개발팀이 개발한 SPIKE코드의 해석 모형 및 알고리즘을 소개하였으며 검증 계산 결과를 제시하였다. KALIMER IHTS의 소듐-물 반응사고로 인한 계통내 압력 거동을 분석하였다. 소듐-물 반응사고의 초기는 압력파 전달과 질량 전달 영역으로 구성됨을 확인하였다. 압력파 전달 영역에서의 압력 거동은 계통의 설계 특성과 무관하나 질량 전달 영역에서는 Cover gas 체적과 파열판 파열 압력에 크게 의존함을 확인하였다. KALIMER IHTS의 초기 소듐-물반응사고 해석 결과는 적절한 Cover gas체적과 파열판 압력 설정을 통해 압력 진동이 설계 압력 범위로 조절할 수 있음을 확인하였다.