• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.121-122
• /
• 2003

In this study a microchannel with various arrangement of blocks is newly proposed. This design comprises periodically arranged simple blocks. In this configuration, the stirring is greatly enhanced at a certain geometric parameter set. To characterize the flow field and the stirring effect both the numerical and experimental methods were employed. To obtain the velocity field, three-dimensional numerical computation to the Navier Stokes equations are performed by using a commercial code, FLUENT 6.0. The fluid-flow solutions are then cast into studying the characteristics of stirring with the aid of Lyapunov exponent. The numerical results show that the particles' trajectories in the microchannel heavily depend on the block arrangement. It was shown that the stirring is significantly enhanced at larger block-height and it reaches maximum when the height is 0.8 times the channel width. We also studied the effect of the block stagger angle, and it turns out that the stirring performance is the best at the block angel ${45^\circ}$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2446-2462
• /
• 2016

In this paper, a frequency domain Expectation-Maximization (EM)-based channel estimation algorithm for Space Time Block Coded-Orthogonal Frequency Division Multiplexing (STBC-OFDM) systems is investigated to support higher data rate applications in wireless communications. The computational complexity of the frequency domain EM-based channel estimation is increased when higher order constellations are used because of the ascending size of the search set space. Thus, a search set reduction algorithm is proposed to decrease the complexity without sacrificing the system performance. The performance results of the proposed algorithm is obtained in terms of Bit Error Rate (BER) and Mean Square Error (MSE) for 16QAM and 64QAM modulation schemes.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.421-422
• /
• 2006

Using the still image through the camera reports which the moving object tracking system. Moving object direction detected to compare the two difference images. And base block set at moving object. Matching area set current difference image. The edge image of prior frame and current frame implement the moving object tracking system to block matching.

• Transactions of Materials Processing
• /
• v.31 no.1
• /
• pp.5-10
• /
• 2022

In multi-stage cold forging process, to enhance the productivity and product quality, in-site process monitoring technique by implanting sensors such as piezo-sensor and acoustic emission sensor has been continuously studied. For accurate analysis of the process, the selection of appropriate sensors and implantation positions are very important. Until now, in a multi-state forging machine, wedge parts located at the end of punch-set are used but it is difficult to analyze minute changes in die block-set. In this study, we also implanted sensors to the die part (die spacer) and compared signals from both sensors and found that sensing signals from die part showed enhanced process monitoring results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.2
• /
• pp.478-493
• /
• 2024

In this paper, the Mixed Integer Linear Programming (MILP) model is improved for searching differential characteristics of block cipher Midori-64, and 4 search strategies of differential path are given. By using strategy IV, set 1 S-box on the top of the distinguisher to be active, and set 3 S-boxes at the bottom to be active and the difference to be the same, then we obtain a 5-round differential characteristics. Based on the distinguisher, we attack 12-round Midori-64 with data and time complexities of 2⁶³ and 2^103.83, respectively. To our best knowledge, these results are superior to current ones.

• Journal of the Korea Society for Simulation
• /
• v.15 no.4
• /
• pp.79-86
• /
• 2006

Data transmission in poor environment like underwater has considerably serious delay rate and ewer rate. Like this environment usually has heavy fluctuation of error rate and limited wireless communication state. Therefore, mechanism using in such environment has to be efficient and simple. This paper suggests a new block ack mechanism, called the Pervasive Block ACK (PBA), which transmits aggregated ACKs. This mechanism takes effect on reducing number of traffic, decreasing overhead and delay rate in poor environment networks like underwater. Additionally, we can expect energy consumption. We verify propriety and efficiency of PBA through describing numerical result based analytical formula in this paper.

• Restorative Dentistry and Endodontics
• /
• v.44 no.3
• /
• pp.23.1-23.9
• /
• 2019

Objectives: The aim of this study was to investigate the microshear bond strength (${\mu}SBS$) of different universal adhesive systems applied to hybrid computer-aided design/computer-aided manufacturing (CAD-CAM) restorative materials repaired with a composite resin. Materials and Methods: Four types of CAD-CAM hybrid block materials-Lava Ultimate (LA), Vita Enamic (VE), CeraSmart (CS), and Shofu Block HC (SH)-were used in this study, in combination with the following four adhesive protocols: 1) control: porcelain primer + total etch adhesive (CO), 2) Single Bond Universal (SB), 3) All Bond Universal (AB), and 4) Clearfil Universal Bond (CU). The ${\mu}SBS$ of the composite resin (Clearfil Majesty Esthetic) was measured and the data were analyzed using two-way analysis of variance and the Tukey test, with the level of significance set at p < 0.05. Results: The CAD-CAM block type and block-adhesive combination had significant effects on the bond strength values (p < 0.05). Significant differences were found between the following pairs of groups: VE/CO and VE/AB, CS/CO and CS/AB, VE/CU and CS/CU, and VE/AB and CS/AB (p < 0.05). Conclusions: The ${\mu}SBS$ values were affected by hybrid block type. All tested universal adhesive treatments can be used as an alternative to the control treatment for repair, except the AB system on VE blocks (the VE/AB group). The ${\mu}SBS$ values showed variation across different adhesive treatments on different hybrid CAD-CAM block types.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.643-646
• /
• 1987

A criterion is developed for the, selection of the best pairing of the control and manipulated variables and for the interaction analysis of decentralized multi-input multi-output control systems. This criterion is based on the difficulty caused by the interaction terms in finding the in-verse of the block steady gain matrix. A quantitative measure of the best pairing is obtained from the resemblance of a set of independent block multi-loop systems. Several examples show the validity of the pairing criterion.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.157-164
• /
• 2022

The proposed privacy preserving scheme has identified the drawbacks of existing schemes in Vehicular Networks. This prototype enhances the number of nodes by decreasing the cluster size. This algorithm is integrated with the whale optimization algorithm and Block Chain Technology. A set of results are done through the NS-2 simulator in the direction to check the effectiveness of proposed algorithm. The proposed method shows better results than with the existing techniques in terms of Delay, Drop, Delivery ratio, Overhead, throughout under the denial of attack.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.11
• /
• pp.63-71
• /
• 2010

FormFactors is one of the most critical design factors in early development of mobile phone, and proper selection of FormFactors is necessary for smoothness of product development and customer satisfaction. Especially, emergence of mobile convergence added so various functions besides its original call function that importance of selecting FormFactors has increased because multiform FormFactors are needed. However there is problem such as frequent change of decision making in existing process because established process picks out FormFactors sensibly and arbitrarily through idea pull and so forth. We proposed FormFactors selection process by Axiomatic Design, set approach method and block approach method for reasonable and systematical FormFactors selection. First of all, we set the purpose of mobile phone development, and it is examined by Axiomatic Design. FormFactors design matrix is deduced through this process, the numbers of axes and rails are proposed using set approach method, and then patterns of FormFactors are embodied by block approach method. Particularly process application was tried through case study of mobile phone development, and we ensured that new FormFactors can be presented to a designer by systematical verification if change of customer requirements occurs through our process.