• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.115-117
• /
• 2011

포항가속기연구소에서 성능향상사업으로 2.5 GeV에서 3.0 GeV로 에너지를 증강하는 사업을 추진중에 있다. 선형가속기의 전자를 가속하기 위하여 필요한 에너지 공급 장치로서 RF 증복기인 80 MW 클라이스트론과 200 MW 펄스 전원공급장치가 필요하다. 성능향상사업으로 전자를 가속하기 위하여 기존의 12set중 4set는 개조하고 4set는 추가하는 방안으로 16set의 200 MW 펄스 전원공급장치를 설치하여 운전 중에 있다. 그중 8set는 3상 AC/AC 위상제어 방식을 사용한 SCR 제어기의 출력을 승압트랜스퍼머 및 정류회로를 이용하여 고전압의 직류를 피드백 받아 일정한 펄스 전원을 공급하기 위해 설치후 시험중에 있다. 펄스를 부하로 전달시 발생하는 노이즈한 환경에서 SCR Controller의 제어방식과 설치하여 시험한 결과를 검토하고자 한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.159-166
• /
• 2013

This paper proposes an efficient loop accelerator for a motion estimation specific instruction-set processor. ME algorithms in nature contain complex and multiple loop operations. To support efficient hardware (HW) loop operations, this paper introduces four loop instructions and their specific HW architecture. The simulation results show that the proposed loop accelerator can reduce about 29% average instruction cycles for ME early-termination schemes compared with typical implementation having a combination of compare and conditional jump instructions. The proposed loop accelerator of the motion estimation specific instruction-set processor can significantly reduce the number of program memory accesses and greatly save power consumption. Hence, it can be quite suitable for low power and flexible ME implementation.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.132-134
• /
• 2013

포항가속기 연구소에서 4세대 전자를 가속시키기 위하여 RF 공급원으로 사용하는 펄스 모듈레이터의 고전압 안정도는 100ppm 이하의 고전압이 요구된다. 따라서 본 연구소에서 산업체와 연계하여 인버터를 적용한 고정밀 고전압 CCPS를 개발하였다. 개발된 고정밀 고전압 CCPS의 사양은 50 kV, 5 kJ/sec, 100 ppm 이하 1set와 50 kV, 30 kJ/sec, 1000 ppm 4set이다. 고정밀 고전압 CCPS를 시험하기 위하여 4세대용 200 MW 모듈레이터를 설치하여 시험하였다. 본 논문에서는 고정밀 고전압 CCPS의 개발하고 제작하여 모듈레이터에 적용하여 시험한 내용을 보이고자 한다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2169-2171
• /
• 2001

The vacuum gauge control system has been designed and implemented using multi-serial communication controllers (MSCC) for the 2.5 Gev storage ring at the Pohang Accelerator Laboratory (PAL). There are 20 Balzers vacuum gauges and 17 Granville-Phillips vacuum gauges at the storage ring. A MSCC have two RS485 (max speed 460.8Kbps) field network port, 8 channel serial communication ports (max speed 460.8Kbps) connected to gauge controller for serial communication control. 12 MSCCs are connected to a personal computer (PC) through the RS485 field network. The PC can automatically control the MSCCs by sending set of commands through the network. The commands specify the duration of the MODBUS protocol. Upon receiving a command from a PC running under Windows2000 through the network, the MSCC communicate through the serial output ports to gauge controller. In this paper, we describe control structure and scheme of the vacuum gauge control system.

• Elastomers and Composites
• /
• v.16 no.1
• /
• pp.3-13
• /
• 1981

The purpose of this dissertation is to study the physical properties of cellular rubber products for industrial use. Vulcanization characteristics were investigated by usingcure curve that had obtained by means of Rheometer. The results of physical properties, vulcanization characteristics and foaming states are as follows. 1. The test results for vulcanization characteristics of NR compounds indicated that in the recipe R-1. When accelerator D is used, the optimum conditions of vulcanizate are obtained, while formula R-2 and R-3 have shown higher torgue at curing time, $1{\sim}2$ minutes. Cellular rubber product test in terms of compression set and compression deflection has also met the requirements of SAE. 2. For SBR compounds, S-1 formula was the best in terns of vulcanization characteristics, and for the blowing structure of cellular rubber products, formula S-3 in which accelerator M is added was fair. All other test results, such as compression set and compression deflection properties met SAE requirements. 3. NBR compound (N-1) including accelerator TT was the best in terms of vulcanization characteristic and also blowing structure. All other properties listed above met requirements, particulary for oil resistance test. 4. In the test of EPDM compounds, when mixed accelerator, M and TT, is used(formula E-1) the best results were obtained. Since EPDM is hydrocarbon elastomer, oil resistance test failed. All other properties met the requirement specified in SAE.

• International Journal of Concrete Structures and Materials
• /
• v.10 no.1
• /
• pp.113-124
• /
• 2016

This paper presents the effect of silica fume and nano silica, used individually and in combination with the set accelerator and/or hydrated lime, on the properties of class F high volume ultra fine fly ash (HV-UFFA) cement composites, replacing 80 % of cement (OPC). Compressive strength test along with thermogravimetric analysis, X-ray diffraction and scanning electron microscopy were undertaken to study the effect of various elements on the physico-chemical behaviour of the blended composites. The results show that silica fume when used in combination with the set accelerator and hydrated lime in HV-UFFA cement mortar, improves its 7 and 28 day strength by 273 and 413 %, respectively, compared to the binary blended cement fly ash mortar. On the contrary, when nano silica is used in combination with set accelerator and hydrated lime in HV-UFFA cement mortar, the disjoining pressure in conjunction with the self-desiccation effect induces high early age micro cracking, resulting in hindering the development of compressive strength. However, when nano silica is used without the additives, it improves the 7 and 28 day strengths of HV-UFFA cement mortar by 918 and 567 %, respectively and the compressive strengths are comparable to that of OPC.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1208-1209
• /
• 2015

포항가속기 연구소에서 4세대 10 GeV 전자를 가속시키기 위하여 대전력 펄스 RF 51sets가 요구된다. 대전력 RF 펄스 공급원으로 200MW 펄스 모듈레이터를 사용하고 있으며 모듈레이터에 공급하는 고전압 전원을 인버터 전원공급장치를 사용한다. 인버터 전원공급장치의 입력 전원은 3상 480 Vac을 사용하고 있으며 운전시 고전압 전원공급장치에서 많은 고조파가 발생한다. 따라서 본 논문에서는 고조파 성분을 측정 분석하고 고조파 성분을 저감하기 위한 대책 방안을 강구하고자 한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.195-200
• /
• 2011

KS F 2782 (for shotcrete accelerators) standard cross-section of tunnel construction or repair is a reinforcement used in the field of shotcrete accelerators as a criterion in assessing shotcrete performance. Thus, KS F 2782 by standard accelerator will determine the nature of the product of concrete accelerators that will be used to record variations in the product roles, through determination of the quality of the experimental method to identify only the quality of the many variables that exist. This evaluation standard has so far distinguished accelerator products in indoor experiments that do not meet quality standards but were mostly for an on-site accelerator mixed with the shotcrete after being quite satisfied with the level of quality in a certain number of products. This observation is derived from the results of an indoor experiment considered to verify whether the site is suitable for indoor experiments, and whether its actual location in the city is relevant to the accelerator quality, to find a way to test if it fits. This study centers on the material conditions of the shotcrete accelerator and a variety of experimental results, and used the Gilmore needle to compare the compressive strength and KS F 2782 specification of the accelerator as a means to ensure product quality conformity analysis and for further research experiments. In conclusion, a portion of KS F 2782 standard that fixes the problems that can be resolved from the ground up as a whole is not a review for the domestic reality. As an indoor experiment to ensure uniformity in the field when applied in a sufficient correlation, complement must be in place.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.66-66
• /
• 2002

Under Atomic Energy Society of Japan (AESJ) and Japan Atomic Energy Research Institute (JAERO, a Working Party on Reactor Physics of Accelerator-Driven System (ADS-WP) has been set since March 1999 to review and investigate special subjects related to reactor physics research of Accelerator-Driven System (ADS). In the ADSWP, the extensive and aggressive activity is being made by 25 professional members in the field of reactor physics in Japan. The ADS is now studying three subjects related to subcriticality of ADS; (1) calculation accuracy of sub criticality on ADS, (2) critical safety issues of ADS, and (3) theoretical review of subcriticality and its measurement methods. This paper describes two topics related to the subjects (1) and (2); one is an analysis of maximum reactivity potentially inserted to a subcritical core and the other is a benchmark proposal for checking calculation accuracy of sub criticality on ADS. The full specification of the calculation benchmark will be supplied by June 2002. Researchers from overseas, especially from Korea, are welcome to join this benchmark

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.141-144
• /
• 2020

Convolutional neural networks (CNNs) show high performance in computer vision tasks including object detection, but a lot of weight storage and computation is required. In this paper, a pruning scheme is applied to CNNs for object detection, which can remove much amount of weights with a negligible performance degradation. Contrary to the previous ones, the pruning scheme applied in this paper considers the base accelerator architecture. With the consideration, the pruned CNNs can be efficiently performed on an ASIC or FPGA accelerator. Even with the constrained pruning, the resulting CNN shows a negligible degradation of detection performance, less-than-1% point degradation of mAP on VOD0712 test set. With the proposed scheme, CNNs can be applied to objection dtection efficiently.