• 대한기계학회논문집B
• /
• 제37권3호
• /
• pp.213-219
• /
• 2013

본 논문의 목적은 스풀 랜드(spool land)와 슬리브(sleeve) 사이의 정특성 방정식으로부터 스풀 밸브의 압력 특성과 유동특성을 구하는 것이다. 이러한 목적을 달성하기 위하여, 스풀 랜드와 슬리브 사이의 유동을 환상간극 유동과 오리피스 유동, 그 중간의 천이 영역으로 나누고, 천이 영역의 유량계수를 길이에 따른 두 영역으로 나눈 선형 일차방정식으로 가정하였다. 스풀 밸브의 압력특성방정식을 구하기 위해 스풀의 중립지점에서부터의 변위에 따른 유동을 $q_a=q_b=0$의 조건으로부터 구하였으며, 스풀 밸브의 유량특성방정식을 구하기 위하여 스풀의 중립지점에서부터의 변위에 따른 유동을 $q_a=q_b$, $p_a=p_b$의 조건으로부터 구하였다. 구해진 수식의 타당성은 수치해석을 통해 실험식 및 기존논문과의 비교를 통해 확인하였다.

• 융합신호처리학회논문지
• /
• 제4권3호
• /
• pp.49-54
• /
• 2003

본 논문에서는 PID 제어기 응답을 보상하기위해 자기구성 신경망 보상기를 추가한 제어기를 제안한다. 기존의 PID 제어기는 제어기 설계가 간단하나 계수값을 설정하는데 많은 시행착오가 필요하다. 그리고, 신경망 제어 방식은 여러 파라미터들을 설계자의 임의에 따라 결정함으로써 최적의 구조를 갖지 못하는 단점이 있다. 본 논문에서는 이러한 문제를 해결하기위해 역전파 알고리즘을 기본으로 하여 은닉계층 노드의 활성화 함수로 가우시안 포텐셜함수를 사용하는 자기구성 신경망을 사용해, PID 제어기의 출력을 보상하도록 하였다. 자기구성 신경망은 학습을 진행함에 따라 가우시안 함수의 위치와 모양, 갯수가 자동으로 조정 되도록 하였다. 자기구성 신경망 보상기를 추가한 PID 제어기의 성능을 확인하기 위해서 2차 플랜트에 적용하여 모의 실험하였으며 DSP 프로세서를 사용하여 제어기를 구현한 후 유압 서보시스템의 속도 제어에 적용하여 실험결과를 관찰하였다.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.462-466
• /
• 2008

This paper proposes a stable gain scheduling method of linear time invariant controllers for tracking servo system. In order to read and write the data on the optical disc, the pick-up head should be moved to the exact track quickly and follow the track immediately. Two different controllers are used for each moving and track-following. In pull-in period, a transition period from moving to track-following, the head might slip and miss the target track. This brings on another searching process and increases the total time. One way to avoid slipping is to extend the bandwidth of the track-following controller. But, extending the bandwidth could degrade the following performance. More prevalent way is to use one more controller in this pull-in period and switch to the following controller. In general, however, switching or scheduling of stable controllers cannot guarantee the stability. This paper suggests an scheduling method guaranteeing the overall stability not only in a generalized form but also in special form for SISO system. The sufficient condition is derived from the fact that Q factor of a stable controller should be stay in $RH_{\infty}$ space. In the experiment, the proposed method shows better performance than the switching method such as shorter time and lower current consumption.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1755-1762
• /
• 2004

Friction phenomenon can be described as two parts, which are the pre-sliding and sliding regions. In the motion of the sliding region, the friction force depends on the velocity of the system and consists of the Coulomb, stick-slip, Streibeck effect and viscous frictions. The friction force in the pre-sliding region, which occurs before the breakaway, depends on the position of the system. In the case of the motion of the friction in the sliding region, the LuGre model describes well the friction phenomenon and is used widely to identify the friction model, but the motion of the friction in the pre-sliding such as hysteresis phenomenon cannot be expressed well. In this paper, a modified friction model for the motion of the friction in the pre-sliding region is suggested which can consider the hysteresis phenomenon as the Preisach model. In order to show the effectiveness of the proposed friction model, the sliding mode controller (SMC) with hysteresis friction compensator is synthesized for a ball-screw servo system.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.379-382
• /
• 2007

The MEMS (Micro Electro Mechanical Systems) process is used in a micro/nano pattern manufacturing method. This method is based on the lithography technology. But the MEMS process has some problems such as complicated process, long processing time and high production costs. Many researchers are doing research in substitute manufacturing method to work out a solution to these problems. In this paper, we apply a dieless incremental forming technology to a substitute method of MEMS process. This dieless forming technology is using in the commercial scale sheet forming such as a prototype of automobile sheet parts. 5-axes CNC (Computerized Numeric Control) method are applied in this system to get a micro-scale dieless forming results. These 5-axes system are composed of precision AC servo motor stages (4-axes) and PZT actuator (1-axis). A PZT actuator is used in a precision actuating axis because it can be operated in the nano scale stroke resolution. This micro dieless incremental forming system has the advantage of minimization in manipulating distance and working space. As equipment and tools become smaller in size, minute inertia force and high natural frequency can be obtained. Therefore, high precision forming performance can be obtained. This allows the factory to quickly provide the customer with goods because the manufacturing system and process are reduced. To construct this micro manufacturing system, many technologies are necessary such as high stiffness frame, high precision actuating part, structural analysis, high precision tools and system control. To achieve the optimal forming quality, the micro dieless forming system is designed and made with high stiffness characteristic.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.906-908
• /
• 2002

The technical improvement of servo system, it is required to study on robust control method in company. It needs to study on brake system that has constant torque-speed performance as load variation. In this paper, braking torque characteristics of eddy current braker between electromagnet stator and rotating disk are analyzed. The torque-speed characteristics and proper disk construction are presented. From the computer simulation results, it was found that eddy current braking torque is linear or approximately constant over the desired speed range depending on the rotor material, disk construction, pole number and pole displacement of stator. The relationship of these parameters are confirmed by experimental result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.124-126
• /
• 1996

In this paper, the driving systems of the Fiber Optic Gyrocompass absolutely required a constant speed and a precise position control with fine step angle, are presented. One of the proposed systems is a stepping motor system with microstep driver, another one is a DC servo motor. Experimental results indicate that a low cost and simple FOG driving system using a stepping motor is capable of a satisfactory operation.

• 한국정밀공학회지
• /
• 제7권3호
• /
• pp.83-93
• /
• 1990

The characteristics of servo systems are desired to be independent for any unpredicted operational condition. The relation between input current and output flowrate of the servovalve is dependent on the load pressure and the idea of compensation using the load pressure feedback is fundamental theory in this paper. With this idea, this paper researches the performance improvement of hydraulic position control system. Static characteristics of compensated system is analyzed by means of analog computer simulation, digital computer simulation and experiment for nonlinear model and linearized model, respectively.

• 조명전기설비학회논문지
• /
• 제26권11호
• /
• pp.97-103
• /
• 2012

The basic processing unit for instant ramen noodles includes mixing, rolling, boiling, frying, cooling, and packing processes. For uniform thickness of dough sheets in rolling process, the roll-gap in rolling process needs to keep uniform thickness of flour sheets in spite of different kinds of raw materials. In this paper, we have developed a roll gap adjustment system using a PLC (Programmable Logic Controller) with a touch panel and an AC servo-mechanism to make dough sheets with a good gluten starch-network structure and uniform thickness and to contribute to process standardization by transferring from tacit knowledge of skilled workers to explicit knowledge. The developed system can adjust the roll gap in units of 0.01mm and correspond to various product items which have different thickness specification by recalling the presetting values of the desired thickness from database.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.418-421
• /
• 2001

Press brake is used as bending and forming sheet metal in vehicle and many kind of industry. This paper deals with development of NC press brake based on high precision positioning device and software, which can be operated on personal computer. In this system, positioning device is used for controlling bending angle and operated by the developed software, which is database from material property, width and thickness of material. This study will make distribution in development of computer aided press brake.