• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.1-10
• /
• 2023

This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.

• Journal of Internet Computing and Services
• /
• v.24 no.5
• /
• pp.37-50
• /
• 2023

In general, PLL or DDS are mainly used as precise and stable frequency synthesis methods. For stable operation, a PWM frequency generation algorithm was designed and implemented using FPGA. This is an algorithm that creates a frequency 8,192 times the target frequency and then performs the D flip-flop 13 times to generate multiple frequencies with a precision of 1 Hz. Using the designed algorithm, it is applied to the Berthing system for stopping trains in station. The applied product was developed and tested against the existing operating system to confirm its superior performance in terms of frequency generation accuracy.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.10-17
• /
• 2010

Safety-critical systems related to the railway communications are currently undergoing changes. Mechanical and electro-mechanical devices are being replaced by programmable electronics that are often controlled remotely via communication networks. Therefore designers and operators now not only have to contend with component failures and user errors, but also with the possibility that malicious entities are seeking to disrupt the services provided by theirs systems. Recognizing the safety-critical nature of the types of communications required in train control operations, the communications infrastructure will be required to meet a number of safety requirements such as system faults, user errors and the robustness in the presence of malicious attackers who are willing to take determined action to interfere in the correct operation of a system. In this paper, we proposed the safety strategies employed in the railway communications and a security mechanism for Korean railway communication system. Also, we presented the developed means for validation and determination of communication safety based on the proposed security mechanism in the railway system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.516-521
• /
• 2016

In this study, we investigated the operation of railroad fire fighting vehicles against fires on trains in a long railway tunnel. In recent years, long railway tunnels (more than 10 km in length) have been built and the number of such tunnels, such as the Geumjeong tunnel (20.3 km in length) on the Gyeongbu high speed line, Solan tunnel (16.7 km in length) on the Yeongdong line and Yulhyeon tunnel (50.3 km in length) on the Suseo high speed line which is scheduled to be opened in the second half of 2016, is increasing. Significant damage is to be expected, due to the increased evacuation time and limited accessibility of fire services when the train is stopped by an urgent fire in the tunnel. Special fire fighting vehicles capable of running on rails have been developed and operated in overseas advanced countries. Therefore, a fire-response system using Unimog vehicles, which can run on road and rail, instead of road vehicles, is necessary. The characteristics of the railway tunnel and thermal environmental change caused by a train fire in a tunnel were analyzed in this study. Also, the operational requirements of the railroad fire fighting vehicles were evaluated by taking into account the specifications of the railroad fire fighting vehicles under development.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.49-53
• /
• 2017

In this paper we present the combination of location based mobile advertisement services and dynamic digital signage markets has been developing recent days to provide consumer admired visual mobile advertisement on all kind transportation vehicles. In spite of that, the digital signage advertisement content management is still not that easy to manage the content dynamically as well operation is most time consuming to handle the contents dynamically in digital signage business. As location based services is most impactful service in shopping, the location responsive advertisement on vehicle signage will be most desirable mobile advertisement to help people migrate from one place to another place for travel or stay. This paper propose a mobile location responsive digital signage system for vehicles using the GPS and wireless infrastructure integrated with digital signage system. This proposed research use the centralized digital signage system architecture for the mobile advertisement application and this system can be expanded to different vehicles for digital advertisement including buses, trucks, train, air vehicle and any other form of mobile advertising vehicles. Also, this present an effective advertisement recommendation algorithm, by which the advertisement can be selected broadcasted for the right advertisement ventures more effectively as the service requested from advertiser. This paper present the emulated experimental result to evidence the proposed dynamic vehicle signage system performed better than compared with traditional signage random advertising. The emulated result proves that the advertisement recommendation algorithm can effectively works out the targeted key audiences in location responsive region the algorithm evaluated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.367-374
• /
• 2006

This research revealed the operation problems of the current crossing control systems through inspecting and testing the obstacle detection systems and gate control systems for the crossings. To resolve the problems of the crossing control systems, this research developed new algorithms of four-quadrant gate system and obstacle detection systems combing the functions of rasar sensors and magnetic sensors and tested the reliability of the systems. Currently, the obstacle detection systems and gate control systems controls approaching and departing traffic by simply detecting vehicles and obstacles but do not consider traffic movements at the crossings. In addition, they do not make signal cooperation for gate controls. As a result, such inefficient crossing controls result in unsafe gate controls for drivers. Therefore, the newly developed crossing control systems through this study will provide more effective crossing control services with more strengthen information cooperation within control systems. Besides they will help to reduce train crashes at the crossings by gate control systems considering various driving behaviors.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.3-16
• /
• 1998

The goal of the transportation policy of Seoul is to increase the ridership of the subway system by constructing the public transportation network, the subway system. To accomplish this goal, the city of Seoul has been constructing the Metropolitan Subway System. Currently, seven subway lines which connect major areas in Seoul are operating. However, the ridership of subway system was not increased as much as we expected, even though more subway lines have been implemented. It seems that although the length of the subway line was extended, the current way of the subway operation that trains stop at every station cannot satisfy the passenger's need. Thus, we should try to increase the demand by providing quicker services and diversifying the subway operations; changing the point of view is required. This paper introduces the distinctive features of the express subway system and the model for analysing the effects of that system. This paper also presents the results for the feasibility study of the express subway system on the 5th Subway Line and Kyong-Eue Railway Line. Based on the results of the case studies, We can conclude as : First, the express system reduces a total travel time by about $13\%$; in particular, the Kyong-Eue Line is more effective than the subway Line ${\sharp}5$. Second, the shorter headway of express trains increases the time saving effects on subway system although it requests more waiting time to low-speed train passengers. When the service frequency is increased from 5 to 7.5 times/hour, total saved time ratio is about $10\%$ in the Subway Line ${\sharp}5$ and about $18\%$ in the Kyong-Eue Line.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.51-58
• /
• 2019

The LTE system decided to build an integrated disaster safety communication network in order to cope with disasters quickly after the April 16, 2014 disaster, and 333 agencies in 8 areas will build a unified disaster safety communication network. It plans to integrate LTE-R, a railway integrated wireless network, and LTE-M, a land-based communication network, in the 700MHz band. LTE-R, a wireless integrated network, and the Ministry of Land, Transport and Maritime Affairs, are currently using VHF and TRS, which are voice communication-oriented communication systems, in order to cope with demand for high-speed railway service, With this possible LTE-R, it is possible to provide advanced services such as radio-based train control and improve railway safety. The company plans to invest KRW 1.1 trillion in new routes to be launched in 2018 and the existing route to be improved in the future, and to build up all routes of general and high-speed railways to LTE-R by 2027.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.75-82
• /
• 2005

To relieve congestion in the current system of intercity transportation, the Korea decided in 1990 to construct a high-speed railroad between Seoul and Busan and it is now in operation. This new mode of transportation significantly cut travel time between major cities and a trip from Seoul to the southeastern port of Busan. Since the KTX opening, average daily passenger numbers on both the Gyeongbu and Honam lines have increased about 1.3 fold over 2003 levels. As of December 2004, the KTX trains are carrying about 81,000 people a day. On KTX routes, the daily number of airline passengers dropped. Express long-distance bus traffic also dropped by 20% to 30%, while that on short-distance routes (100km or less) increased by about 20%. These figures clearly indicate that the Korean transportation network is becoming railroad-centric. However, the number of KTX passengers is fewer than anticipated possibly due to the Korean economic downturn and the operation of the KTX will leave many existing Saemaul and Mugunghwa train sets idle, which will be put into operation for areas, not covered by the KTX. When all the existing major lines have been electrified, more high-speed rail services will be phased in using direct connections to maximize operational efficiency. And also, the dual management by KTX and conventional rail will be regarded as the promotion of the benefit of the public.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.9
• /
• pp.721-736
• /
• 2019

In this paper, the behavior of the fire smoke due to the operation of the ventilation systems when the fire occurred in the underground station (6 basement floors) and the tunnel at the great depth was measured. Fire smoke was generated by using a smoke generator which realized heat buoyancy effect by using hot air blower. The two locations of the fire were selected on the platform and on the platform of the tunnel located outside the screen door. A ventilation mode is generally used in which smoke is exhausted through a vent hole provided in a platform when a platform fire occurs. The tests were performed by operating the exhaust through the ventilation holes of the tunnel part located at both ends of the platform. The smoke density and the wind speed/velocity were measured at various positions, and the videos were taken to analyze the movement and smoke of the smoke. In both cases for fire inside the platform and in the railway tunnel, due to the ventilation mode operation of the fan for the platform and the exhaust of the fans in the tunnel smoke were well exhausted and the smoke propagation to the area near the smoke zone was suppressed. The smoke-control mode, which is applied to both fans for the platform and fans for in the tunnel at both ends of the platform, can provide a safer evacuation environment to the passengers from the fire smoke when the platform fire or fire train stops.