• Journal of Internet Computing and Services
• /
• v.10 no.6
• /
• pp.51-79
• /
• 2009

Today the service industry is growing, and differentiated services for marketing and service quality is emerging as a serious problem. Until now, the WebCam is used for observation, and the negative aspects, such as from a human rights issue has become. Discipline and Punish is not to use a webcam to customer satisfaction research is needed. Therefore, wireless monitoring in WebCam service quality of the service reconfiguration and service quality factors for the configuration of the customer's preference regarding how research was recognized. Configuration of the service quality factors WebCam service customer satisfaction and customer loyalty was to identify factors that affect. These services to study the correlation between the quality variables WebCam provides wireless monitoring services for the preschool and children, a survey of the house. Configuring a wireless monitoring service quality in order to research the factors WebCam video quality and transmission speed, mobility and portability, convenience, visibility, reliability, and the interaction of the castle set. Severely and video quality and transmission speed, visibility, reliability, customer satisfaction, the interaction factors are said. Inclination to participate in social issues, innovation, digital devices that use a skilled, depending on the difference in the service quality has been confirmed. However, the age and quality of service awareness and job types showed a low correlation, and the marketing of these results will be discussed and how that can be used.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.271-273
• /
• 2006

In this paper, we describe the MI2U ORB function which is a part of the flight software executed on SCU and controls MI2U/MI which is one of three payloads on COMS. The MI2U ORB function manages MI2U/MI redundancy and reconfiguration, monitors MI2U/MI equipment, performs FDIR, and provides the routing service of commands from Ground/IP (Interpreted Program) through the current used 1553 channel. The MI2U hardware achieves the interface between the SCU and the MI. The MI2U is connected to SCU through MIL-STD-1553B system bus. The MI2U has the internal redundancy but is used in cold redundancy. The MI2U ORB function considers that they are not expected to be simultaneously switched on. The connection combination between MI2U and MI is electrically cross-strapped. However the MI2U ORB function considers only two combinations (MI2U A + MI 1, MI2U B + MI 2). Other combinations can be manually achieved by ground in case of the emergency case.

• Electronics and Telecommunications Trends
• /
• v.35 no.2
• /
• pp.28-37
• /
• 2020

Recently, the focus of research interest in artificial intelligence technology has shifted from algorithm development to application domains. Industrial sectors such as smart manufacturing, transportation, and logistics venture beyond automation to pursue digitalization of sites for intelligence. For example, smart manufacturing is realized by connecting manufacturing sites, autonomous reconfiguration, and optimization of manufacturing systems according to customer requirements to respond promptly to market needs. Currently, KSB Convergence Research Department is developing BeeAI-an on-site end-to-end intelligence platform. BeeAI offers end-to-end service pipeline configuration and DevOps technologies that can produce and provide intelligence services needed on-site. We are hopeful that in future, the BeeAI technology will become the base technology at various sites that require automation and intelligence.

• The KIPS Transactions:PartA
• /
• v.8A no.1
• /
• pp.16-26
• /
• 2001

This paper proposes an extended scheduler model that is an extension of the existing model proposed already in [4, 5], which consists of upper layer task scheduler and lower layer scheduling framework. However, in order to support aperiodic task scheduling, the task scheduler has been divided into two parts, such as periodic task control component and aperiodic task control component. Thus, the proposed model can support various bandwidth-preserving servers that can service aperiodic tasks. The model distinctly separates a classic monolithic kernel scheduler into several kernel components according to their functionality. This enables system developers to implement a new scheduling algorithm or aperiodic task server independent of complex low kernel mechanism, and reconfigure the system at need. In Real-Time Linux [6], we implemented the proposed scheduling framework representative scheduling algorithms, and server bandwidth-preserving servers on purpose to test. Throughout these implementations, we confirmed that a new algorithm or server could be developed independently without updates of complex low kernel modules. In order to verify efficiency of the proposed model, we measured the performance of several aperiodic task servers. The results showed this the performance of model, which even consisted of two hierarchical components and several modules, didnt have such high run-time overhead, and could efficiently support reconfiguration and scheduler development.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1031-1041
• /
• 2009

A small microstrip monopole antenna for macro-micro frequency tuning over multiple bands is presented. The meander-shape antenna is fabricated on a conventional printed circuit board(FR-4, $\varepsilon_r=4.4$ and tan $\delta=0.02$). The antenna operates over WiBro(2.3~2.4 GHz) and WLAN a/b(2.4~2.5 GHz/5.15~5.35 GHz) service bands with an essentially constant antenna gain within each service band. Two diodes, a PIN diode and a varactor, are embedded into the antenna for frequency reconfiguration. The PIN diode is used for frequency switching(macro-tuning) between 2 GHz and 5 GHz bands while the varactor is used for frequency tuning(micro-tuning) within the service bands, 2.3~2.5 GHz and 5.15~5.35 GHz. Unwanted resonances between the two frequency bands(2 GHz and 5 GHz) are suppressed by filling up the gaps between the meander lines. The antenna gain is essentially constant and higher than 2 dBi within each service band. The measured performance of the proposed antenna system suggests the macro-micro frequency tuning techniques be useful in reconfigurable wireless communication systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.492-501
• /
• 2007

UMTS-WLAN interworking approach can make the best use of the advantages of both networks by eliminating the stand-alone defects of the two services. For the interworking mechanisms of WLANs and UMTS networks, two major solutions have been proposed, namely loose coupling and tight coupling. The loose coupling approach provides separate data paths for WLAN and UMTS. On the other hand, the tight coupling provides a full integration of the WLAN network and the UMTS core network. The loose coupling has been preferred due to the simplicity and less reconfiguration requirement. However, loose coupling is worse in seamless mobility, QoS provision, and network security. In order to lessen the problems involved in the UMTS-WLAN interworking approaches, we propose a new interworking network architecture and a fast vertical handover scheme by employing Mobility Anchor(MA) for interworking between the two different networks. MA can enable authentication and session initialization before L2 handover of the mobile terminal, so that the seamless and fast vertical handover become possible. Thru analysis and numerical experiments, we proved that the proposed scheme has been validated.

• Journal of the Korean housing association
• /
• v.27 no.6
• /
• pp.65-75
• /
• 2016

Activities in the dwelling are inseparable from housing design. Spatial features often result from patterns of activities that take place within the dwelling. Activities are further elaborated to affect house plans, furniture, arrangement, and equipment. However, discrepancies still exist between housing design and behavior, where housing design often fails to accommodate activities and behavioral dimensions within the family and the dwelling. This paper addresses the relationship between dwelling activities and housing design by means of a qualitative study that aims to understand the needs of the Indonesian dwelling through activity analysis. To do so, the research adopts a methodology that involves collecting data from measurements of the house, house plan analysis, and photographs, in addition to in-depth semi-structured interviews with families. Taking Bandung as a case study, 9 houses and families were selected as respondents that share similar family life-cycles, number of family members, and building size. The findings from the study suggest that spacious and open plans are preferred by the family, while maintaining family privacy. Guest areas are used to host formal guests and to restrict visitor access in the house. Service areas such as kitchens and laundry areas are the core areas for household activities for cooking, laundry, and drying. To meet social activities such as community gathering, open plan design is necessary to allow flexibility of furniture reconfiguration to accommodate extra guests.

• Journal of Information Technology and Architecture
• /
• v.11 no.4
• /
• pp.441-448
• /
• 2014

The application of spatial information has drawn significant attention from a wide range of industries. Railway spatial information facilitates the cooperation among related parties and improves the efficiency of asset management and operations. This study proposes the structure of Railway Object IDentifier(ROID) on railway spatial information. Current facility management and train operation are based on relative positioning system. Despite many advantages, relative positioning system causes serious problems such as the entire reconfiguration of positioning in the case of line change. Another major concern is the interface compatibility between individual facilities with different relative positioning. ROID based on absolute positioning addresses these issues, allowing the information exchange and convergence between independent parties. This study proposes ROID based on OID standard with object IDentifier and service object-oriented reference system. Our ROID employs the absolute positioning and the unique identifier, maintaining the compatibility with existing management system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.295-307
• /
• 2002

The IEEE 1394 protocol is a de facto standard in multimedia digital home network. It supports several advanced features such as hot plugging, dynamic network reconfiguration, isochronous transmission and so on. Since the IEEE 1394 was adapted in the field of multimedia service with QoS guarantee, back bone network protocol with reel-time digital instrumentation and control sub networks, and physical layer protocol for real-time middleware such as real-time CORBA, the additional real-time features has been required in device driver implementation because of the necessity of the predictability enhancement. To guarantee the real-time features, the device driver of the IEEE 1394 should support the priority based packet processing and also need a isochronous buffer management mechanism to deal with the periodic isochronous communication. In this paper, we proposed a new software architecture of the IEEE 1394 device driver for supporting the real-time characteristics such as priority based packet processing, priority based scheduling and so on.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8B
• /
• pp.777-785
• /
• 2009

In recent wireless sensor networks, stationary nodes and mobile nodes co-exist to provide a diverse service. However, because there are multiple mobile nodes located in the wireless sensor network, there is a potential for the instability due to the frequent network reconfiguration and the traffic caused by densely concentration of mobile nodes while mobile nodes are switching locations. In order to solve this problem, we propose the pumping node architecture to solve this traffic congestion problem due to the crowds of mobile nodes. The pumping node can be reduced heavy traffic by pumping through the backbone network caused by the densely concentration of the mobile nodes. As a result, the architecture reduces the traffic in the sensor network with high reliability.