• Structural Engineering and Mechanics
• /
• v.54 no.6
• /
• pp.1111-1133
• /
• 2015

Rebar corrosion in concrete is one of the main causes of reduction of service life of reinforced concrete buildings. This paper presents the influence of rebar corrosion on the structural behavior of reinforced concrete (RC) buildings subjected to strong earthquake ground motion. Different levels of rebar corrosion scenarios were applied on a typical four story RC frame. The deteriorated conditions as a result of these scenarios include loss in cross-sectional area and loss of mechanical properties of the reinforcement bars, loss in bond strength, and loss in concrete strength and its modulus of elasticity. Dynamic analyses of the frame with different corrosion scenarios are performed with selected strong earthquake ground motion records. The influences of degradation in both concrete and reinforcement on structural behavior are investigated by comparing the various parameters of the frame under different corrosion scenarios with respect to each other. The results show that the progressive deterioration of the frame due to rebar corrosion causes serious structural behavior changes such as change in failure mode. The intensity, propagation time, and extensity of rebar corrosion have very important effects on the level of degradation of steel and concrete, as well as on the earthquake behavior of the structure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.4
• /
• pp.551-559
• /
• 2008

Increase in power consumption can cause a serious stability problem of an electric power system without construction of new power plants or transmission lines. Also, it can generate large power loss of the system. In costly and environmentally effective manner to avoid constructing the new infrastructures such as power plants and transmission lines, etc, the distributed generation(DG) has paid great attentions so far as a solution for the above problem. Selection of optimal location and size of the DG is the necessary process to maintain the stability and reliability of existing system effectively. However, the systematic and cardinal rule for this issue is still open question. In this paper, the method to determine optimal location of the DG is proposed by considering power loss when the DG is connected to an electric power grid. Also, optimal size of not only the corresponding single DG but also the multi-DGs is determined with the proposed systematic approach. The IEEE benchmark 30-bus test system is analyzed to evaluate the feasibility and effectiveness of the proposed method.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.543-548
• /
• 2023

Korea has achieved great economic growth, but the high rate of accidents in the industry still threatens the safety of workers and causes a lot of property loss. In order to lower the accident rate, the Occupational Safety and Health Act was fully revised in April 2020 and safety management was strengthened, but the number of deaths rather increased. In response, the government and the National Assembly implemented the Serious Accident Punishment Act in January 2022, but the effect has not been confirmed. So, this study conducted a questionnaire survey on how the safety awareness of construction site workers and managers was affected after the Serious Accident Punishment Act. and suggested measures to improve safety management.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.81-86
• /
• 2000

This paper was carried out to investigate the characteristics of interlaminar fracture toughness of foam core sandwich structures under opening loading mode by using the double cantilever beam (DCB) specimens in Carbon/Epoxy and foam core composites. instead of using symmetric geometry of DCB specimen non-symmetric DCB specimen was used to calculate the interlaminar fracture toughness. Three approaches for calculating the energy release rate({{{{ {G }_{IC } }}}}) were compared. Fracture toughness of foam core sandwich structures by autoclave vacuum bagging and hotpress were compared and analyzed. Experiment nonlinear beam bending FEM method were performed. Suggested bonding surface compensation and equivalent area inertia moment was used to calculate the energy release rate in nonlinear analytical results. The conclusions among experimental nonlinear analytical and FEM results was observed. The vacuum bagging method was shown to be able to substitute method in stead of autoclave without serious loss of Mode I energy release rate({{{{ {G }_{IC }}}}}) to be able to substitute method in stead of autoclave without serious loss of Mode I energy release rate({{{{ {G }_{IC }}}}}).

• Korean Journal of Clinical Pharmacy
• /
• v.28 no.3
• /
• pp.243-249
• /
• 2018

Background: The new type of diabetes treatment, SGLT2 inhibitors, has been approved for monotherapy and combination therapy, but medical insurance is only allowed in combination therapy with metformin, which is the first choice for type 2 diabetes treatment. Methods: The SGLT2 inhibitors prescribed in Korea are dapagliflozin, empagliflozin and ipragliflozin. A review was conducted using Pubmed to evaluate efficacy and safety for these medications with metformin combination therapy. 10 studies were selected by searching for keywords and related references and were reviewed in full. The mechanism of action, pharmacokinetics, and the economics of treatment with SGLT2 inhibitors were examined. Results: SGLT2 inhibitors had moderate glycemic control when added to the treatment of patients with type 2 diabetes who were not being regulated by metformin monotherapy. They also showed positive effects such as weight loss, as well as the lowering of blood pressure. Hypotension and serious side effects were relatively low. However, the risk of genital infection was increased. Conclusion: The SGLT2 inhibitors are a new class of drugs that promote glucose excretion in the urine. They are a good choice for combination therapy with metformin for the treatment of type 2 diabetes, with weight loss and very low risk of serious side effects.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.4
• /
• pp.32-36
• /
• 2004

AC loss is one of the important parameters in HTS (High Temperature Superconducting) AC devices. Among the HTS AC power devices, the transformer is an essential part in electrical power system. But, AC loss is one of the most serious problems of the HTS transformer, especially with pancake windings, because high alternating magnetic field is applied perpendicularly to the surface of BSCCO wire in HTS windings of that, comparing with the other HTS AC power devices. For the reason above the calculation of AC loss generated in the HTS windings should be carried out in advance when designing the HTS transformer. In the paper we performed study for optimization of winding design to minimize the magnetization loss of HTS winding such as the spaces between pancake windings and operating temperature of HTS wire. The calculation of the AC loss was accomplished by 2-demensional Finite Element Method.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.9-14
• /
• 1993

Weathering of wood in a region of acid rain was performed by the test which thin veneers of Sitka spruce were exposed to outdoor weathering for a total of 18 weeks, with a daily soaking for 30 minutes in acidified water in the pH range 2~5.6. The weathering measured by weight loss and loss in maximum failure load in tension was accelerated by the increase in the acidity of acidified water and in the period of outdoor exposure. It was also shown that the weathering was accelerated even with low acidic conditions in the case of long exposure period, although the weathering was rapidly accelerated with high acidic conditions. When compared the degree of weight loss with that of loss in failure load by weathering, the latter was much greater. From the results of this research, it could be concluded that at pH 4.0 or below of precipitation, the acceleration of weathering of exterior wood would become serious problems, which would be caused deterioration in performance of exterior wood.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.47-54
• /
• 2001

Similar patterned fire incidents such as, Inchon Live-Hof Pub Restaurant as, Sea-land Children Resort have proven that serious loss of lives were caused by hazardous gas generated from a combustion of interior finish and decorative materials. Therefore, comparing Korean fire regulation with other countries fire code, e.g. UK, USA, France about limitation of interior finish and decorative materials in premises as assemblies, differences & problems have been int estimated and analyzed on hew serious they may affect on fire spread and smoke development based on analyze facts. It is suggested that Korean fire code would be revised in order to reduce hazardous interior finish materials from special occupancy and adapted new test methods to verify proper fire performance in premises as assembles which require a fire certificate. Finally, detailed code alternatives will be suggested in order to set up effective fire regulation, which could promote preventing serious loss of lives in future.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.2
• /
• pp.47-55
• /
• 1999

Recently, noise from personal cassette players (PCP) poses growing concerns together with occupational noise-induced hearing loss. Eighteen male and female volunteer subjects participated to determine preferred noise levels for PCP usage before, during, and after 2-hour subway riding according to sources (types) of PCP listening (language/news, soft music, and hard music). Audiometric tests were conducted before and after the 2-hour exposure of PCP noise under subway riding. Statistical analyses showed some significant hearing losses with the greatest loss of more than 6 dB at 4000 Hz for both ears, indicating that serious noise-induced hearing loss would potentially occurred due to prolonged use of PCPs. Practical safety countermeasures against PCP noise are further discussed.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2004.11a
• /
• pp.103-109
• /
• 2004

The obese population has been increasing over the world wide and obesity became a socioeconomic problems. It is become more serious by the accumulation of the knowledge that the obesity is related directly or indirectly with several diseases like, diabetes, hypertension, etc. With these reasons, many functional food or agents for the purpose of weight loss have been developed. However, most of these remedies are unproven and some have produced even dangerous side effects due to the ephedrine alkaloids contained in Ma-Hang. Because of these reasons, they banned using of these agents in US and regards the antiobesity functional agents as drugs in Europe. Several functional agents are known for weight loss activities like, HCA, L-canitine, CLA, chitosan, calcium supplements and capsaicin containing red pepper, kimchi and kochujang. We describe here about the function, efficacy and mechanism of these antiobesity functional agents. Furthermore, the trial of the mixture of weight loss related herbal ingredients for safe multifunctional antiobesity functional agents are discussed here, as well.