• 대한조선학회논문집
• /
• 제60권6호
• /
• pp.416-423
• /
• 2023

Recently, the design point of the propeller is gradually changing due to the demand for energy saving and environmental protection. Until recently, self-propulsion model tests were conducted using stock propellers and geometry information was provided to propeller designers, but the range of existing stock propellers did not keep up with the changing design points, and the range of series propellers required in the initial design was also insufficient. Future propeller performance requires high performance and eco-friendliness, and the need for expansion of series propellers has increased. In order to respond to future needs and provide a wide range of advantages in propeller design, KRISO manufactures about 100 series propellers and builds series data through a model tests. In this paper, the approach method for deriving the representative optimal shape to be applied to the 4-blade series propeller in the initial stage of series propeller development was summarized.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1440-1448
• /
• 2019

In wireless power transfer systems, it is important to design resonant energy links in order to increase the power transfer efficiency and to obtain desired system performances. This paper proposes a method for designing and analyzing the resonant energy links in a series-series configured IPT (inductive power transfer) system using the FOM-rd plane. The proposed FOM-rd graphical design plane can analyze and design the voltage gain and the power efficiency of the energy links while considering changes in the misalignment between the coils and the termination load condition. In addition, the region of the bifurcation phenomena, where voltage gain peaks are split over the frequency, can also be distinctly identified on the graphical plane. An example of the design and analysis of a 100 W inductive power transfer system with the proposed method is illustrated. The proposed method is verified by measuring the voltage gain and power efficiency of implemented hardware.

• 전기의세계
• /
• 제23권2호
• /
• pp.46-54
• /
• 1974

The purposes of this paper are to deal with the design of m-input, m-output linear systems by the state variable feedback, and to extend the design capability of the state variable feedback design. The design requirements are decoupling and the exact realigation of desired transfer functions. Some methods are proposed to insert series compensators in the fixed plant in the cases when series compensators are needed to meet the input-output transfer matrix specification. The method for adding series compensators to the input channels of the fixed plant is shown by examples to lead both to the loss of the ability to decouple the augmented plant by the state variable feedback, and to the loss of desired zeroes. A method which avoids these two hazards is developed in which series compensators are put on the output channels of the fixed plant: it is proved that the augmented plant is F-invariant. By treating each subsystem individually, the designer can apply some of the previous developed knowledge of the state variable design of single-input, single-output systems.

• 한국농공학회지
• /
• 제28권3호
• /
• pp.69-78
• /
• 1986

This studies were established to find out the characteristics of frequency distributiom for the number of occurrence and magnitude, probable flood flows according to the return periods, design floods, and design frequency factors for the studying basins in relation to the risk levels which can be correlated with design return period and the life of structure in the non-annual exceedance series. Eight watersheds along Han, Geum, Nak Dong and Seom Jin river basin were selected as studying basins. The results were analyzed and summarized as follows. 1. Poisson distribution and Exponential distribution were tested as a good fitted distributions for the number of occurrence and magnitude for exceedance event, respectively,at selected watersheds along Han, Geum, Nak Dong and Seom Jin river basin. 2.Formulas for the probable flood flows and probable flood flows according to the return periods were derivated for the exponential distribution at the selected watersheds along Han, Geum, Nak Dong, and Seom Jin river basin. 3.Analysis for the risk of failure was connected return period with design life of structure in the non-annual exceedance series. 4.Empirical formulas for the design frequency factors were derivated from under the condition of the return periods identify with the life of structure in relation to the different risk levels in the non-annual exceedance series. 5.Design freguency factors were appeared to be increased in proportion to the return periods while those are in inverse proportion to the levels of the risk of failure. Numerical values for the design frequency factors for the non-annual exceedance series ware appeared generally higher than those of annual maximum series already published by the first report. 6. Design floods according to the different risk levels could be derivated by using of formulas of the design frequency factors for all studying watersheds in the nor-annual exceedance series.

• Advances in Computational Design
• /
• 제2권4호
• /
• pp.283-291
• /
• 2017

High frequency full bridge series resonant inverters have become increasingly popular among power supply designers. One of the most important parameter for a High Frequency Full Bridge Series Resonant Inverter is optimal coil design. The optimal coil designing procedure is not a easy task. This paper deals with the New Approach to Optimal Design Procedure for a Real-time High Frequency Full Bridge Series Resonant Inverter in Induction Heating Equipment devices. A new design to experimental modelling of the physical properties and a practical power input simulation process for the non-sinusoidal input waveform is accepted. The design sensitivity analysis with Levenberg-Marquardt technique is used for the optimal design process. The proposed technique is applied to an Induction Heating Equipment devices model and the result is verified by real-time experiment. The main advantages of this design technique is to achieve more accurate temperature control with a huge amount of power saving.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.288-295
• /
• 2003

A preliminary series design of compressors for a two-stage centrifugal chiller is suggested. Six groups of hydrodynamically similar compressors, ranging from 233RT to 1,200RT, are introduced. Flow rates, impeller diameters, and wheel speeds for each group are determined from hydrodynamic similarity to share impellers of adjacent groups. It is expected that these compressors can have the same performance and efficiency from the smallest model to the largest one.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1396-1403
• /
• 2011

It is not easy to analyze the strong nonlinear time series and effectively design a good prediction system especially due to the difficulties in handling the potential uncertainty included in data and prediction method. To solve this problem, a new design method for fuzzy prediction system is suggested in this paper. The proposed method contains the followings as major parts ; the first-order difference detection to extract the stable information from the nonlinear characteristics of time series, the fuzzy rule generation based on the hierarchically classifying clustering technique to reduce incorrectness of the system parameter identification, and the IT2TSK fuzzy logic system to reasonably handle the potential uncertainty of the series. In addition, the design of the multiple predictors is considered to reflect sufficiently the diverse characteristics concealed in the series. Finally, computer simulations are performed to verify the performance and the effectiveness of the proposed prediction system.

• 한국해양환경ㆍ에너지학회지
• /
• 제14권2호
• /
• pp.73-80
• /
• 2011

어선용 고효율 표준 프로펠러 개발에 대해 고찰해 보았다. 어선용 프로펠러의 경우 모형시험이나 이론해석을 통한 정도 높은 설계가 이루어지지 않고 시리즈 데이터(주로 MAU 시리즈)에 의존하여 초기설계 수준에 머무르고 있는 실정이다. 본 연구에서는 52톤 어선을 기준으로 개발되었으며 기존 MAU 형 프로펠러보다 성능이 우수한 프로펠러를 손쉽게 설계, 적용할 수 있는 NACA형 단면을 사용한 시리즈 프로펠러 자료를 제공하기위한 연구를 수행하였다. 또 한 기존의 복잡한 설계 방식 대신에, NACA형 프로펠러를 표준화하여 보다 편리하게 사용할 수 있도록 하였다. 향후 모형 시험을 통한 추진 성능 및 캐비테이션 성능 검증을 수행할 계획이다.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제19권4호
• /
• pp.247-265
• /
• 2015

Mathematics textbook plays a significant role in shaping students' learning of mathematics. Logic, rigor and abstraction as typical features of the formalization of mathematics, dominate mathematics textbooks around the world, which is regarded as one of the important origins of students' learning difficulties in mathematics. An innovative series of Chinese mathematic textbooks is presented in this paper. Supported by the supplementary materials excerpts from the textbooks, it gives a comprehensive theoretical analysis of the principles of design and implementation of this series of mathematics textbooks. The effectiveness of this series of textbooks is demonstrated by student achievement and secondary research data. It shows that series of Chinese mathematic textbooks has largely decreased students' learning difficulties in mathematics and enhance classroom teaching efficiency. It suggests that prioritizing the essence of mathematics and reducing abstraction is an important notion for mathematics textbook design and implementation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.418-422
• /
• 2005

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire has been investigated. Test pieces were fabricated using die series with different mean and final reduction ratio. Surface residual stresses in the axial direction were measured by X-ray diffraction, Broker's 2-dimensional GADDS system. Results were compared with stress profiles which were calculated by 3D and 2D finite element simulation, Hibbitt's ABAQUS 6.4 program in Finite Element Analysis. By means of FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.