• 한국정보통신학회논문지
• /
• 제8권6호
• /
• pp.1188-1193
• /
• 2004

비도 높은 암호용으로 연구된 유한체 곱셈 연산기는 크게 직렬 유한체 곱셈기, 배열 유한체 곱셈기, 하이브리드 유한체 곱셈기으로 분류되어 왔다. 직렬 유한체 곱셈기는 마스트로비토 (Mastrovito) (1)에 의하여 제안되어 유한체 곱셈기의 가장 기본적인 구조로 자리잡아 왔고, 이를 병렬로 처리하기 위해 m 배의 자원을 투자하여 m 배의 속도를 얻어낸 결과가 2차원 배열 유한체 곱셈기이며 (2), 이들 기존 방식의 장점만을 취하여 제안된 방식이 1999년 Paar에 의해 제안된 하이브리드 (hybrid) 곱셈기이다 (3). 반면 이 하이브리드 곱셈기는 사용 가능한 유한체로서 유한체의 차수를 합성수로 사용해야 한다는 제약이 따른다. 본 논문에서는 마스트로비토의 곱셈기의 구조를 기본으로 하고, 수식적으로 공통인수를 끌어내어 후처리하는 기법을 유도하여 적용한다. 제안한 방식으로 설계한 새로운 유한체 곱셈기는 HDL로 구현하여 소프트웨어 측면 뿐 아니라 하드웨어 측면에서도 그 기능과 성능을 검증하였다. 제안된 방식에서 직렬 다항 기준식 (polynomial)을 t (t는 1보다 큰 양의 정수) 부분으로 나누어 적용하였을 경우 곱셈기는 t 배의 속도 향상을 보일 수 있다.

• 대한임베디드공학회논문지
• /
• 제12권4호
• /
• pp.193-204
• /
• 2017

Various 3D-stacked DRAMs have been proposed to overcome the memory wall problem. Hybrid Memory Cube (HMC) is a true 3D-stacked DRAM with stacked DRAM layers on top of a logic layer. The logic die is mainly used to implement a memory controller for HMC, and it is connected through a high speed serial link called SerDes with a host that is either a processor or another HMC. In HMC, the serial link is crucial for both performance and power consumption. Therefore, it is important that the link is configured properly so that the required performance should be satisfied while the power consumption is minimized. In this paper, we propose a HMC system model included the high speed serial link to estimate performance accurately. Since the link modeling strictly follows the link flow control mechanism defined in the HMC spec, the actual HMC performance can be estimated accurately with respect to each link configuration. Various simulations are conducted in order to deduce the correlation between the HMC performance and the link configuration with regard to memory utilization. It is confirmed that there is a strong correlation between the achievable maximum performance of HMC and the link configuration in terms of both bandwidth and latency. Therefore, it is possible to find the best link configuration when the required HMC performance is known in advance, and finding the best configuration will lead to significant power saving while the performance requirement is satisfied.

• 전자공학회논문지A
• /
• 제28A권11호
• /
• pp.855-865
• /
• 1991

A simple method for analysis of serial search burst-format direct-sequence spread-spectrum (DS-SS) code acquisition system had been recently proposed, and therein, the effect of the code autocorrelation sidelobes on the performance of DS-SS code acquisition system has been assessed [4],[5]. In this paper, a new hybrid scheme which combines the serial search with maximum likelihood search is proposed to eliminate the deleterious effect of code autocorrelation sidelobes, and the performance is analyzed for the additive withe Gaussian noise (AWGN) channels. To analyze the performance of this system, we have generalized the method used in [4],[5] to arbitrary burst-format DS-SS acquisition schemes. The results show that a new hybrid scheme has good immunity against the effect of code autocorrelation sidelobes. Thevalidity of the presented approach has been confirmed form the results of simulation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.725-731
• /
• 2004

In this study, the three type hybrid interrupters according to the arrangement of the thermal expansion chamber and the puffer cylinder(they are called 'serial type', 'parallel/exchanged type', and 'parallel/separated type' respectively in this work) were designed and manufactured. This paper presents the tested results of the thermal recovery characteristics on the interrupters using a simplified synthetic test facility. The 'serial type' hybrid interrupter which is to obtain more easily the pressure rise for the thermal recovery compared with the others has the best capability in the thermal recovery characteristics. In order to investigate the stress on the operating mechanism, the distortion of the stroke wave in on-load test was examined to the stroke curve in no-load test. The biggest distortion was occurred in the 'parallel/exchanged type' hybrid interrupter. Finally, the small interruption capability on the three type interrupters was estimated by a theoretical form and the 'parallel/separated type' hybrid interrupter has the advantage of the others in the view of structure.

• 한국생산제조학회지
• /
• 제21권5호
• /
• pp.778-783
• /
• 2012

Due to the increase of oil price, the needs of the reduction of the fuel cost is rising. Therefore, necessity of hybrid vehicle that runs with engine and the electric motor is on the rise. In order to improve the performance of hybrid vehicle, many researches is carried out. Hybrid vehicles have been developed with the various layout such as serial type, parallel type, power split type, and multi-mode type. The multi-mode hybrid vehicles are designed to show the efficient driving characteristics at low speed and high speed. But the multi-mode system have the problem such as frequent clutch engagement. Frequent clutch engagement causes the shock of vehicles, and the shock inhibits the ride comfort. In this study, automation mechanism of clutch operation is proposed to mitigate the shock at engaging clutch. For this purpose, the dynamic characteristics of motor control is numerically analyzed by using Matlab/Simulink.

• 한국통신학회논문지
• /
• 제25권3A호
• /
• pp.406-411
• /
• 2000

무선 ATM 시스댐에서 효율적인 데이터 전송을 위해서는 우수한 오류 정정 부호가 필요하다. 본 논문에서는 오류 정정 부호로 RCPSCCC를 사용한 적응 하이브리드 ARQ 기법을 제안한다. 이 RCPSCCC의 부호율은 채널 환경과 데이터 종류에 따라 조절된다. 레일레이와 라이시안 페이딩 채널에서 BER(Bit Error Ratio)과 WER(Word Error Ratio)의 상한계(upper bound)를 outer 부호기 와 inner 부호기 의 유효 자유거리(effective free distances)만을 사용하여 유도한다. RCPSCCC를 적응 하이브리드 ARQ 프로토콜에 적용함으로서 효율적인 데이터 전송을 할 수 있다.

• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.1862-1867
• /
• 1999

무선 ATM 시스템에서 효율적인 데이터 전송을 위해서는 우수한 오류 정정 부호가 필요하다. 본 논문에서는 오류 정정 부호로 RCPSCCC를 사용한 적응 하이브리드 ARQ 기법을 제안한다. 이 RCPSCCC의 부호율은 채널 환경과 데이터 종류에 따라 조절된다. 레일레이와 라이시안 페이딩 채널에서 BER(Bit Error Ratio)과 WER(Word Error Ratio)의 상한계(upper bound)를 outer 부호기의 inner 부호기의 유효 자유거리(effective free distances)만을 사용하여 유도한다. RCPSCCC를 적응 하이브리드 ARQ 프로토콜에 적용함으로서 효율적인 데이터 전송을 할 수 있다.

• 복식
• /
• 제57권8호
• /
• pp.114-124
• /
• 2007

Contemporary fashion design has been represented as intermedia transcended value and spatiotemporal notion and also had a tendency to concentrate on serial process that materials are transfigured through time rather than existence. These forms related to interaction with time, space and performance as well as compositive genres, hybrid culture, compound gender define as 'serial expression' in this study. The serial expression ran be characterized that system, process, series, enumeration of sequences, depiction of performance, repetition of action in fashion collections and exhibitions of designers. The concept and circumstances made by author as a creator of fashion broaden perceptions of audiences and arouse spectators to participate in the situation as needing immediate attention. The forms of fashion and Conceptual Art in serial expression are analogous and even identical situations represent in fashion collection. Therefore analysis serial forms of art derives formative features: Narrative process, Imitation and Appropriation, Virtual reality and High technology, Hybridism and Convergence. This study suggest a framework to analyze conceptual fashion that give salience to megatrend in contemporary fashion culture on artistic point of view.

• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.67-75
• /
• 2013

In this paper, parallel input/serial output dual converter is designed appropriately for fuel cell hybrid power system. In case of proposed converter, zero voltage switching condition is designed without additional resonance device using leakage inductance of transformer and output capacitance of switch, and zero voltage switching method is used. Also, the system method is for increasing power by connecting half-bridge in parallel and increasing output voltage by connecting secondary output of transformer in serial. Through this method we can increase power and decrease volume of system. So in this paper, dual converter is designed. 1.5kW fuel cell hybrid power system was implemented, and system operation and stability was verified through experiment.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.115-126
• /
• 1999

A two-dimensional Navier-Stokes solver using hybrid meshes is parallelized with a domain decompostion method. The focus of this paper is placed on minimizing the amount of effort in parallelizing the serial version of the solver, and this is achieved by adding an additional layer of cells to each decomposed domain. Most subroutines of the serial solver are used without modification, and the information exchange between neighboring domains is achieved using MPI(Message Passing Interface) library. Load balancing among the processors and scheduling of the message passing are implemented to reduce the overhead of parallelization, and the speed-up achieved by parallelization is measured on the transonic invisicd and turbulent flow problems. The parallelization efficiencies of the explicit Runge-Kutta scheme and the implicit point-SGS scheme are compared and the effects of various factors on the results are also studied.