• The KSFM Journal of Fluid Machinery
• /
• v.12 no.4
• /
• pp.44-53
• /
• 2009

Numerical design optimization of a fan-shaped hole for film-cooling has been carried out to improve film-cooling effectiveness by combining a three-dimensional Reynolds-averaged Navier-Stokes analysis with the radial basis neural network method, a well known surrogate modeling technique for optimization. The injection angle of hole, lateral expansion angle of hole and ratio of length-to-diameter of the hole are chosen as design variables and spatially averaged film-cooling effectiveness is considered as an objective function which is to be maximized. Twenty training points are obtained by Latin Hypercube sampling for three design variables. Sequential quadratic programming is used to search for the optimal point from the constructed surrogate. The film-cooling effectiveness has been successfully improved by the optimization with increased value of all design variables as compared to the reference geometry.

• Korean Journal of Veterinary Research
• /
• v.53 no.1
• /
• pp.29-35
• /
• 2013

To develop a live vaccine candidate using an attenuated strain of Salmonella Typhimurium (ST), biochemical properties, plasmid profile, PFGE patterns and pathogenic analysis of the ST isolate were carried out after sequential passage of the ST isolate in porcine neutrophils. By the passage, the ability of the neutrophil-adapted isolate to utilize d-xylose was lost, while the ability of the strain to ferment trehalose was delayed after 2 or more days of the culture. Also, changes including deletion of the gene fragments were observed in PFGE analysis of the neutrophil-adapted isolates. Two plasmids, 105kb and 50kb, were cured in the strain passaged over 15 times in porcine neutrophils. The 50% of lethal dose ($LD_{50}$) of the parent strain was changed from $1{\times}10^5\;LD_{50}$ to $6{\times}10^6\;LD_{50}$ by the passage in intraperitoneal injection of the strains into mice. These results suggested that bacterial genotypic and phenotypic responses might be globally altered depending on the inside environment of neutrophils.

• Geomechanics and Engineering
• /
• v.29 no.4
• /
• pp.391-405
• /
• 2022

A newly proposed grouting simulation method, the sequential diffusion solidification method was introduced into the numerical simulation of combined bi-borehole grouting. The traditional, critical and difficult numerical problem for the temporal and spatial variation simulation of the slurry is solved. Thus, numerical simulation of grouting and blocking of flowing water in karst conduits is realized and the mechanism understanding of the combined bi-borehole technology is promoted. The sensitivity analysis of the influence factors of combined bi-borehole grouting was investigated. Through orthogonal experiment, the influences of proximal and distal slurry properties, the initial flow velocity of the conduit and the proximal and distal slurry injection rate on the blocking efficiency are compared. The velocity variation, pressure variation and slurry deposition phenomenon were monitored, and the flow field characteristics and slurry outflow behavior were analyzed. The interaction mechanism between the proximal and distal slurries in the combined bi-borehole grouting is revealed. The results show that, under the orthogonal experiment conditions, the slurry injection rate has the greatest impact on blocking. With a constant slurry injection rate, the blocking efficiency can be increased by more than 30% when using slurry with weak time-dependent viscosity behavior in the distal borehole and slurry with strong time-dependent viscosity behavior in the proximal borehole respectively. According to the results of numerical simulation, the grouting scheme of "intercept the flow from the proximal borehole by quick-setting slurry, and grout cement slurry from the distal borehole" is put forward and successfully applied to the water inflow treatment project of China Resources Cement (Pingnan) Limestone Mine.

• The Journal of Korean Physical Therapy
• /
• v.9 no.1
• /
• pp.59-70
• /
• 1997

The ability of neurotropic alpha herpesviruses to replicate within synaptically linked neurons has made these pathogens valuable tools for transneuronal analysis. Recent studies suggest that unique gene products expressed by genetically engineered strains of virus may permit the use of multiple strains in complex tracing paradigms. In the present study we have examined the invasiveness of two genetically engineered strains of the swine pathogen known as pseudorabies virus(PRV). The two strains were isogenic with the attenuated Bartha strain of PRV; in one strain a lacZ reporter gene was inserted into the gC locus (PRV-BaBlu; $4.75\times10^8pfu/ml$) contrained a PRV envelope glycoprotein gene that was absent in PRV-BaBlu. Simultaneous or temporally separated sequential injection of $4\mu\ell$ of each strain into the ventral wall of the stomach produced a predictale course of retrograde synaptic infection. The results were as follows: 1. PRV-BaBlu and PRV-D infected the dorsal motor nucleus of vagus nerve(DMV) and paraventricular nucleus(PVN). 2. Invasion and replication of PRV-D occured at a faster rate than the parental strain or PRV-BaBlu. 3. PRV-D was much more virulent than PRV-BaBlu or the parental strain. 4. Co-injection of PRV-D and PRV-BaBlu produced an infection that was more virulent than that produced by the parental strain (PRV-Bartha), 5. Neurons in DMV were permissive to co-infection with PRV-D and PRV-BaBlu when they were injected simultaneously into the same site. 6. Replication of PRV-BaBlu was compromised by prior infection of the same circuit with PRV-D. 7. Prior infection of neurons with PRV-D maked them resistant to infection with PRV-BaBlu.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.348-348
• /
• 2016

Low dark current (off-current) and high photo current are both essential for a solution processed organic photodetector (OPD) to achieve high photo-responsivity. Currently, most OPDs utilize a bulk heterojunction (BHJ) photo-active layer that is prepared by the one-step deposition of a polymer:fullerene blend solution. However, the BHJ structure is the main cause of the high dark current in solution processed OPDs. It is revealed that the detectivity and spectral responsivity of the OPD can be improved by utilizing a photo-active layer consisting of an interdiffused polymer/fullerene bilayer (ID-BL). This ID-BL is prepared by the sequential solution deposition (SqD) of poly(3-hexylthiophene) (P3HT) and [6,6] phenyl C61 butyric acid methyl ester (PCBM) solutions. The ID-BL OPD is found to prevent undesirable electron injection from the hole collecting electrode to the ID-BL photo-active layer resulting in a reduced dark current in the ID-BL OPD. Based on dark current and external quantum efficiency (EQE) analysis, the detectivity of the ID-BL OPD is determined to be $7.60{\times}1011$ Jones at 620 nm. This value is 3.4 times higher than that of BHJ OPDs. Furthermore, compared to BHJ OPDs, the ID-BL OPD exhibited a more consistent spectral response in the range of 400 - 660 nm.

• Radiation Oncology Journal
• /
• v.13 no.3
• /
• pp.233-241
• /
• 1995

Purpose : To analyse clinical outcome and prognostic factors according to treatment modality, this paper report our experience of retrospective study of patients with esophageal cancer Materials and Methods : One hundred and ten patients with primary esophageal cancer who were treated in Presbyterian Medical Center from May 1985 to December 1992. We analysed these patients retrospectively with median follow up time of 28 months, one hundred and four patients($95{\%}$) were followed up from 15 to 69 months. In methods, twenty-eight patients were treated with median radiation dose irradiated 54.3Gy only. Fifty-six patients were treated with combined chemoradiotherapy. Sixteen cases of these patients were treated with concurrent chemoradiation and the other patients(forty cases) were treated sequential chemoradiotherapy. In concurrent chemoradiotherapy group, patients received 5-FU continuous IV infusion for 4 days. Cisplatin IV bolus. and concurrent esophageal irradiation to 30 Gy. After that patients received 5-FU continuous IV, Cisplatin bolus injection and Mitomycin-C bolus IV, Bleomycin continuous IV, and irradiation to 20 Gy. In sequential chemoradiotherapy group, the chemotherapy consisted of 5-FU 1,000mg/$m^2$ administered as a continuous 24 hour intravenous infusion during five days and Cisplatin 80-100mg/$m^2$ bolus injected, or Bleomycin, Vinblastine, Cisplatin, Methotrexate were used of 1 or 2 cycles. After preoperative concurrentm chemoradiation twenty-six patients underwent radical esophagectomy. Results : Ninety-three patients could be examined for response assessment, By treatment modality, response rates were $85.1{\%}$ for radiation alone group and $86.3{\%}$ for combined chemoradiation group. But in operation group, after one cycle of concurrent chemoradiation treatment, response rate was $61.9{\%}$. The pathologic complete response were $15.4{\%}$ in operation group. Overall median survival was II months and actuarial 5-year survival rate was $8{\%}$. The median survival interval was 6 months for radiation alone group, 11 months for combined chemoradiation group and 19 months for operation group. And also median survival was 19 months for complete responder group that 8 months for noncomplete responder group. In univariative analysis, statistically significant prognostic factors were tumor size, clinical stage, tumor response, and operation. In multivariative analysis, significantly better survival was associated with clinical stage, tumor response, radiation dose, and operation. Conclusion : Compared with radiotherapy alone, combined multimodality may improve the median survival in patients with localized carcinoma of the esophagus and toxicity is acceptable.

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.687-700
• /
• 2000

Antigen-specific T cell clones were obtained from mice immunized with Fusobacterium nucleatum ATCC 10953(F .nucleatum) and/or Porphyromonas gingi valis 381(P. gingivalis). 10 Balb/c mice per group were immunized with F. nucleatum followed by P. gingivalis, or with P. gingivalis alone by intraperitoneal injection of viable microorganisms. Spleen T cells were isolated and stimulated in vitro with viable P. gingivalis cells to establish P. gingivalisspecific T cell clones. T cell phenotypes and cytokine profiles were determined along with T cell responsiveness to F .nucleatum or P. gingivalis. Serum IgG antibody titers to F. nucleatum or P. gingivalis were also determined by ELISA. All the T cell clones derived from mice immunized with F. nucleatum followed by P. gingivalis demonstrated Th2 subsets, while those from mice immunized with P. gingivalis alone demonstrated Th1 subsets based on the flow cytometric analysis and cytokine profiles, All T cells clones from both groups were cross-reactive to both P. gingivalis and F. nucleatum antigens. Phenotypes of T cell clones were all positive for CD4. Mean post-immune serum IgG antibody levels to F. nucleatum or P . gingivalis were significantly higher than the pre-immune levels(p <0.01, respectively). There were no significant differences in the antibody titers between the two groups. It was concluded that P. gingivalis-specific T cells initially primed by cross-reactive F. nucleatum antigens were polarized to Th2 subsets, while T cells stimulated with P. gingivalis alone maintained the profile of Th1 subset.

• BMB Reports
• /
• v.34 no.1
• /
• pp.15-20
• /
• 2001

One of the innate immune reactions in invertebrates is the pro-phenoloxidase (pro-PO) activation system that is involved in the generation of superoxide, melanin synthesis, and the subsequent sequestration of foreign matter entering the hemocoel of the invertebrates. However, the molecular mechanism of this biological reaction is still obscure. To expand our understanding of the biological roles of the pro-PO activation system in invertebrates, we performed a yeast two-hybrid screening by using three regions of pro-PO as bait and a yeast two-hybrid cDNA library from Tenebrio molitor larvae as prey We isolated a novel partial cDNA clone that encodes a glycine-rich protein that interacted with the active phenoloxidase (termed phenoloxidase interacting protein, POIP). POIP consists of two domains: One is an N-terminal unique domain and the other is a C-terminal glycine-rich domain. The C-terminal glycine-rich domain showed sequential homology with those of insect antifungal proteins. Also, the yeast two-hybrid screen in a reverse orientation (using POIP as bait) yielded PO, suggesting that the PO-POIP interaction is specific. By using a 315 bP PCR fragment of the N-terminal unique region of POIP, we cloned the full-length cDNA of POIP from the Tenebruo cDNA library constructed by using E. coli injected larvae. The interaction analysis between PO, and a truncated fragment lacking the N-terminal unique region of POIP, indicated that the N-terminal unique region is necessary for interaction between PO and POIP. The expression level of the POIP mRNA is increased by bacterial injection into T. molitor larvae. This suggests that POIP might be engaged in the humoral defense reaction.

• The Korean Journal of Nuclear Medicine
• /
• v.20 no.1
• /
• pp.25-31
• /
• 1986

This study was performed to establish normal hepatoscintiangiographic(HSA) pattern of hepatic blood flow and to investigate dynamic differential HSA findings of primary and metastatic carcinomas and abscess of the liver. HSA was carried out after intravenous bolus injection of 10 mCi of Tc-99m-phytate by obtaining sequential anterior images of 1-second exposure for 16 seconds. Observations included (1) baseline study of normal hepatic blood flow pattern by correlating with contrast angiogram, (2) time sequence phasing of normal HSA, and (3) analysis of altered patterns in primary and metastatic carcinomas and abscesses of the liver. Materials consisted of 20 normal subjects, 28 primary hepatocellular carcinomas, 16 metastatic carcinomas and 7 liver abscesses. Results were: (1) Normal HSA demonstrated 3 distinct phases of arterialization(AP), of arterial hepatogram(AHP), and of portal venous hepatogram(PVHP). The means of each phase were 5.3, 6.3 and 8.3 seconds, respectively. Portal vein could be seen in all but one of 20 normal subjects. (2) Pattern changes in diseases groups were early start of AP in carcinomas and very early start of AP in abscesses. AP became prolonged in all disease group. (3) Distinction between AHP was sharp in metastasis and abscesses but un sharp in primary hepatoma. Cold area or areas became vascularized in primary hepatoma but not in abscess. Cold areas of metastasis were inhomogeneously vascularized in late AP and throughout AHP and became relatively vascular as PVHP began. The cold area of abscess showed rim enhancement during AH and APH. These differences in HSA pattern were very useful in differential diagnosis of the diseases studied.

• Laser Solutions
• /
• v.6 no.3
• /
• pp.19-28
• /
• 2003

The manufacturing process for the microfluidic device can include sequential steps such as master fabrication, electroforming, and injection molding. The laser ablation, using masks, has been applied to the fabrication of channels in microfluidic devices. In this research, an excimer laser was used to engrave microscopic channels on the surface of PET (polyethylene terephthalate), which shows a high absorption ratio for an excimer laser beam with a wavelength of 248 m. When 50-${\mu}{\textrm}{m}$-wide rectangular microscopic channels are ablated with a 500 ${\times}$ 500 ${\mu}{\textrm}{m}$ square mask at a magnification ratio of 1/10, ditch-shaped defects were found in both corners. The measurement of laser beam intensity showed that a coherent image in the PET target caused such defects. Analysis based on the Fourier diffraction theory enabled the prediction of the coherent shape at the image surface as well as the diffraction beam shape between the mask and the image surface. It also showed that the diameter of the aperture had a dominant effect. The application of aperture with a diameter of less than 3 mm helped to eliminate such defects in the ablated rectangular microscopic channels on PET without such ditch-shaped defects.