• 제목/요약/키워드: Sequence Diagram

검색결과 203건 처리시간 0.026초

강화도(江華島) 동남부(東南部)에 분포(分布)하는 소위(所謂) 강화섬장암질암(江華閃長岩質岩)에 대(對)하여 (Petrology and petrochemistry of the so called "Ganghwa syenitic rock" in southeastern part of Ganghwa Island)

  • 김용준;오민수
    • 자원환경지질
    • /
    • 제11권2호
    • /
    • pp.47-57
    • /
    • 1978
  • The study focused on the petrology and petrochemistry of the so called "Ganghwa syenitic rocks" which intruded into metasediment of basement in southeastern part of Ganghwa Island. The geologic sequence of the mapped area was shown in table 1, 10 model analyses and 7 chemical analyses on the rock samples taken from the Ganghwa syenitic rocks and Manisan granite have been used to discuss the nomenclature of the rocks and petrological relationship between rock types. The petrograpical and petrochemical features based on, the analyses are as follows: 1) Ganghwa syenitic rocks consist of Ganghwa alkali syenite and Ganghwa diorite porphyry which based on the classification of the subcommision on systematics of igneous of IGUS. Ganghwa diorite porphyry which occured as dike forms are intruded into Ganghwa alkali syenite. The rock forming minerals of Ganghwa alkali syenite are composed of perthite, plagioclase, quartz, hornblend and chlorite in major, and zircon, apatite, sericite and magnetite in minor. Ganghwa diorite porphyries consist of plagioclase, biotite, hornblend, orthoclase and chlorite, with, porphyritic texture. 2) In silica-oxides variation (Fig. 2) and AMF diagram (Fig_ 3), the Ganghwa alkali syenite is similar to the trend of Daly's average basalt-andesite-dacite-rhyolite than Skaergaard which shows the trend of the fractional crystallization of magma, and equivalent to the alkali rock series by Peacock. 3) The general trend of data points shift to plagioclase, and are superimposed on the alkali rich terminal part of the granodiorite province of SW Finland in normative Q-Kf-Pl(Fig. 4) and Or-Ab-An diagram respectively. The above-mentioned evidences suggested that the Ganghwa syenitic rocks are the differential products resulted by assimilation of intermediated magma and metasedment rock under relatively rapid cooling condition.

  • PDF

객체지향 분석의 유스케이스와 UML 모델을 이용한 동적 영향 분석 방법 (Dynamic Impact Analysis Method using Use-case and UML Models on Object-oriented Analysis)

  • 이찬;윤청
    • 정보과학회 논문지
    • /
    • 제43권10호
    • /
    • pp.1104-1114
    • /
    • 2016
  • 소프트웨어의 변경은 개발 기간 또는 개발 이후에도 지속적으로 요구된다. 변경 요청 시 영향의 범위를 직관적으로 정확히 파악하는 것은 어려운 일이며, 체계적인 방법을 통해 변경 영향의 범위를 보다 정확하게 파악하는 과정이 필요하다. 변경 영향 분석은 변경에 의해 야기되는 파급 효과를 인식하여 누락되는 부분이 없도록 하는 것을 그 목적으로 한다. 본 논문은 객체지향 개발 환경에서 유스케이스 시나리오와 UML 모델링 산출물들 간의 연관 관계를 이용하여 변경 요청으로 인한 영향의 범위를 쉽게 파악할 수 있는 방법을 제시한다. 이 방법은 유스케이스 시나리오의 변경으로 인해 다른 구성요소들(클래스 다이어그램, 시퀀스 다이어그램)이 받을 수 있는 영향의 범위를 순방향 추적을 통해 파악하고, 구성요소의 변경으로 인해 추가적으로 발생할 수 있는 변경 가능성에 대한 영향 분석은 역방향 추적 과정을 통해 순환적으로 이루어진다. 본 논문의 결과는 영향 분석 대상(산출물)이나 변경 유형에 제한을 받지 않아, 다양한 변경 요청으로 인한 영향 분석 시 기초적인 가이드라인으로 활용할 수 있다.

CBD 기반 소프트웨어에 대한 유스케이스 기반 테스트모델 (A USE CASE based Test Model for CBD Based Software)

  • 유지호;이남용
    • 한국전자거래학회지
    • /
    • 제8권4호
    • /
    • pp.239-252
    • /
    • 2003
  • 품질 좋은 소프트웨어란 성능이 뛰어나고 가격 이 저렴한 소프트웨어를 일컫는 말이다. 또한, 시장 요구에 부응하는 서비스를 지원하면서도 오류가 적고 유지보수하기 쉬운 구조를 가져야 한다. 이 모든 것을 충족하는 소프트웨어를 개발하기 위한 방법으로 최근 CBD (Component Based Development)가 각광 받고 있다. CBD (Component Based Development) 확산과 더불어 컴포넌트 구성, 기능, 호환성, 신뢰성을 위한 컴포넌트 테스트를 수행하고 있으나 이것만으로는 CBD (Component Based Development) 기반 소프트웨어 품질을 보장할 수 엄다. 높은 신뢰성, 유지보수성, 재활용 성을 가지는 단위 컴포넌트라도 조립, 통합 후에는 의도한 요구사항을 만족시키지 못하고 문제를 일으킬 수도 있으므로 이에 대한 통합 테스트 기법이 필요하다. 본 논문은 UML (Unified Modeling Language)기반 소프트웨어 개발에 컴포넌트 통합 테스트를 위한 것이고, 테스트 기법은 UML (Unified Modeling Language)의 순차다이어그램과 협력다이어그램을 참조하여 컴포넌트 사이 인터페이스에 존재하는 결점을 추출하는 테스트기법이다.

  • PDF

THE PHOTOGRAPIC PHOTOMETRY OF THE GLOBULAR CLUSTER NGC 6752

  • Lee, Kang-Hwan;Lee, See-Woo;Jeon, Young-Beom
    • 천문학회지
    • /
    • 제28권2호
    • /
    • pp.153-167
    • /
    • 1995
  • More than 22,300 stars in NGC 6752 were measured over the region of 5' < r < 23' in B and V AAT plates. The most of these are main sequence(MS) stars and about 130 blue horizontal branch(BHB) stars were detected. The C-M diagram of all measured stars shows gaps appearing at $V{\approx}15.^{m}2$ and $16.^{m}2$ along the red giant branch(RGB) and their appearance shown by Lee & Cannon(1980) is found to be independent of measured region. The bimodal distribution of BHB stars is confirmed again and a wide gap shown by Lee & Cannon(1980) at $V{\approx}16^m$ is clearly seen for stars in the outer part (8' < r < 13') in the cluster. It is noted, however, that this gap is occupied by about a dozen of BHB staIs located in the inner region (5' < r < 8'). The number ratio of bright BHB star (V < $15^m$) to faint BHB stars (V > $15^m$) decreases with increasing radial distance from the cluster center. Three faintest BHB stars were found, and two stars ($V{\approx}18.^{m}5$) of there are located in the inner region of $r{\approx}6'$ and the other faintest one ($V{\approx}19.^{m}3$) located in the outer part of $r{\approx}13'$. Also a bluest star of (B - V) $\approx$ -0.5 at $V{\approx}17.^{m}2$ is found but it is located at the outer part of $r{\approx}13'$ in NE region. Therefore, the membership of the faintest BHB star and bluest star is suspected. The luminosity function(LF) and mass function(MF) for NGC 6752 were derived for MS stars. The LF for stars of $M_v\;<\;6^m$ in the outer part of r > 8' shows a consistency with that derived by Penny & Dickens(1986).

  • PDF

통합 물정보 제공을 위한 웹 GIS 기반의 SWG 시뮬레이터 설계 (Design of Web-GIS based SWG Simulator for Disseminating Integrated Water Information)

  • 박용길;김계현;이성주;유재현
    • Spatial Information Research
    • /
    • 제23권1호
    • /
    • pp.19-31
    • /
    • 2015
  • 최근 전 세계적인 기온상승과 불규칙한 이상기후로 인하여 지역간 수자원 격차 및 물부족 현상이 나타나고 있으며 미래 물 수급의 안정성 확보를 위한 수자원 관리가 점차 중요해지고 있다. 이를 해결하기 위해 수자원의 안정적인 확보와 관리가 가능한 방안으로 대두되고 있는 Smart Water Grid (SWG) 연구가 진행되고 있다. 따라서 본 연구에서는 웹 환경에서 통합 물정보 제공을 위한 GIS 기반의 SWG 시뮬레이터를 설계하고자 하였다. 시스템 개발을 위해 사용자 요구분석을 기반으로 SWG 현황 조회, 미래 예측 및 정수장 현황 조회기능을 설계하였으며 사용자의 이해를 높이기 위해 GIS 및 HTML5 기술을 이용한 정보표출 기술을 적용하였다. 또한 비상 상황이 발생했을 때 SWG를 이용한 문제 해결 과정을 확인할 수 있도록 시나리오 재현 기능을 설계하였다. 시스템 개발을 위한 설계도로 Use-case, Class, Sequence diagram을 작성하고 최종 개발 내용을 확인하기 위한 스토리보드를 작성하였다. 본 연구를 통해 설계된 SWG 시뮬레이터는 기후변화 대응을 위한 물관리를 지원하기 위한 정보의 획득을 도울 뿐 아니라 시나리오 재현을 통한 의사결정자의 결정을 도울 수 있을 것으로 판단된다. 주요 기능이 수자원 관리자 및 생산자 위주로 설계되었지만 향후 소비자를 위한 콘텐츠와 기능을 추가로 개발하여 단방향 정보 전달이 아닌 양방향 정보 교환이 가능하도록 해야 할 것이다.

울릉도(鬱陵島) 북부(北部) 알칼리 화산암류(火山岩類)에 대(對)한 암석학적(岩石學的) 연구(硏究) (Petrology of Alkali Volcanic Rocks in Northern part of Ulrung Island)

  • 김윤규;이대성
    • 자원환경지질
    • /
    • 제16권1호
    • /
    • pp.19-36
    • /
    • 1983
  • The study revealed that the sequence of volcanism in Ulrung island can be classified into 5 stages, and the volcanic history is summerized as follow: 1st stage: Eruption of basaltic agglomerates, tuffs and lavas, 2nd stage: Eruption of trachytic and trachyandesitic agglomerates and tuffs, 3rd stage: Eruption of trachyte lavas and their lapilli tuffs, 4th stage: Eruption of trachyte lavas and nepheline phonolites, 5th stage: Eruption of pumice, trachytic ash and lapilli, and plutonic ejecta (fragments of alkali gabbro, monzonite and alkali feldspar syenite) and a subsequent caldera formation. Finally, a small scale eruption of leucite bearing trachyandesite lava in the caldera. Several evidences show that there have been long erosional intervals between the 1st and 2nd stages and between the 4th and 5th stages. A K-Ar age for trachybasalt lava of the 1st stage was determined to be 1.8 Ma, and a $C^{14}$ age, 9300Y. (Machida, 1981) is available for these volcanic events. Therefore, it is considered that volcanic activity of the island above sea level began at least in early Pleistocene, and continued to until 9300 years ago exploding large amount of pumice, prior to pouring out of leucite bearing trachyandesite from the inner caldera. Using solidification index (SI) of Kuno, microscopic texture and mineral composition as criteria of the classification, the volcanic rocks are classified into alkali basalt, trachybasalt, trachyandesite, trachyte and phonolite. These are mostly prophyritic in texture. Main constituent minerals of alkali basalt and trachybasalt are plagioclase, olivine, Ti-augite and magnetite. Principal minerals of trachyandesite are plagioclase, anorthoclase, clinopyroxenes, kaersutite, biotite and magnetite. Trachyte and phonolite consist mainly of anorthoclase, clinopyroxene and magnetite, showing typical trachytic texture in groundmass. In solidification index, alkali basalt ranges from 39 to 27, trachybasalt 17 to 14, trachyandesite 12 to 9 and trachyte 8.15 to 0.72. A trend of compositional variation showing a typical alkali volcanic rock series is revealed on $SiO_2$-oxides and SI-oxides diagrams. In $SiO_2$-total alkali diagram, alkali lime index and An-Ab'-Or diagram, the samples fall into the fields of potassic series of the alkali volcanic rock series, whereas in A-F-M diagram show a trend toward the alkali enrichment with a curve approaching toward the iron apex. In particular, trachybasalt lavas in this island have higher total iron contents which is comparable to alkali rocks in other areas, e. g. as Gough and Tristan volcanic islands located near the Mid-Oceanic ridge in South Atlantic Ocean.

  • PDF

사물인터넷을 이용한 증착 공정의 개선된 순서제어의 부하 균등의 해석 (Deposition Process Load Balancing Analysis through Improved Sequence Control using the Internet of Things)

  • 조성의;김정호;양정모
    • 디지털융복합연구
    • /
    • 제15권12호
    • /
    • pp.323-331
    • /
    • 2017
  • 본 논문에서는 사물인터넷을 증착 순서 공정에 적용하여 증착 공정을 진행하는 과정의 제어에 온도제어기, 압력제어기, 가스제어기, 입출력 제어기 등 네 가지 종류를 대체하여 개선된 순서제어에 따른 부하균등을 해석하였다. 먼저 증착 설비에서 사물인터넷의 적용 전과 후의 시퀀스 절차를 통해 각각의 기능을 갖는 온도제어기, 압력제어기, 가스제어기, 입출력 제어기로 제어에 필요한 데이터를 전송받아서 개선된 시퀀스 순서대로 실행을 비교하여 순서과정을 제안하였다. 또한, 증착 공정에서 사물인터넷의 도입 전과 후를 비교하면서 증착 공정의 시퀀스 다이어그램을 작성하여 증착과정의 센싱 영역에 대한 부하 균등을 수행하였다. 이를 위해 각 센서입출력을 랜덤 프로세스와 버스트 프로세스 도착으로 모델링하고 CPU 부하와 메모리 부하를 수행한 결과를 도출하였다. 결과적으로 증착설비의 증착 공정에 장비제어기에서 수행하던 일부 기능을 사물인터넷에서 수행함으로써 장비제어기의 부하 균등 조절로 부하를 감소시키고 순서제어의 감소로 신뢰성은 높아지는 결과를 확인하였다. 본 논문을 통해 확인한 바와 같이, 사물인터넷을 증착 공정에 적용하면 설비의 확장 시에도 장비제어기의 부하를 최소화 함으로써 설비의 안정성을 향상시킬 수 있을 것을 것으로 기대된다.

공간일정계획에서의 부하조정을 위한 방법론 연구 (A Study on method of load attribute for Spatial Scheduling)

  • 백동식;윤덕영;곽현호
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2004년도 학술대회지
    • /
    • pp.96-100
    • /
    • 2004
  • In the ship building industry various problems of erection is counterfeited due to formation of bottle necks in the block erection flow pattern This kind of problems cause accumulated problems in real-time erection right on the floor, When such a problem is approached, a support data of the entire erection sequence should be available, Here planning is done by reasoning about the future events in order to verify the existence of a reasonable series of actions to accomplish a goal. This technique helps in achieving benefits like handling search complications, in resolving goal conflicts and anticipation of bottleneck formation well in advance to take necessary countermeasures and boosts the decision support system, The data is being evaluated and an anticipatory function is to be developed This function is quite relevant in day to day planning operation. The system updates database with rearrangement of off-critical blocks in the erection sequence diagram, As a result of such a system, planners can foresee months ahead and can effectively make decisions regarding the control of loads on the man, machine and work flow pattern, culminating to an efficient load management. Such a foreseeing concept helps us in eliminating backtracking related adjustment which is less efficient compared to the look-ahead concept. An attempt is made to develop a computer program to update the database of block arrangement pattern based on heuristic formulation.

  • PDF

ULTRAVIOLET COLOR - COLOR RELATION OF EARLY-TYPE GALAXIES AT 0.05

  • 이창희;정현진;오규석;정철;이준협;김상철;경재만
    • 천문학회보
    • /
    • 제37권1호
    • /
    • pp.48.1-48.1
    • /
    • 2012
  • We present the ultraviolet (UV) color-color relation of early-type galaxies (ETGs) in the nearby universe (0.05 < z < 0.12) to investigate the properties of hot stellar populations responsible for the UV excess (UVX). The initial sample of ETGs is selected by the spectroscopic redshift and the morphology parameter from the SDSS DR 7, and then cross-matched with the GALEX far-UV (FUV) and near-UV (NUV) GR6 data. The cross-matched ETG sample is further classified by their emission line characteristics in the optical spectra into quiescent, star-forming, and active galactic nucleus categories. Contaminations from early-type spiral galaxies, mergers, and morphologically disturbed galaxies are removed by visual inspection. By drawing the FUV-NUV (as a measure of UV spectral shape) versus FUV-r (as a measure of UVX strength) diagram for the final sample of -3700 quiescent ETGs, we find that the "old and dead" ETGs consist of a well-defined sequence in UV colors, the "UV red sequence," so that the stronger UVX galaxies should have a harder UV spectral shape systematically. However, the observed UV spectral slope is too steep to be reproduced by the canonical stellar population models in which the UV flux is mainly controlled by age or metallicity parameters. Moreover, 2 mag of color spreads both in FUV-NUV and FUV-r appear to be ubiquitous among any subsets in distance or luminosity. This implies that the UVX in ETGs could be driven by yet another parameter which might be even more influential than age or metallicity.

  • PDF

철도차량 대차 적용 유리섬유/에폭시 4-매 주자직 적층 복합재의 인장-압축 피로특성 평가 연구 (A Study on the Evaluation of Tension-Compression Fatigue Characteristics of Glass Fiber/Epoxy 4-Harness Satin Woven Laminate Composite for the Railway Bogie Application)

  • 전광우;신광복;김정석
    • Composites Research
    • /
    • 제23권5호
    • /
    • pp.22-29
    • /
    • 2010
  • 본 논문은 철도차량 경량화 재질로 적용된 유리섬유/에폭시 4-매 주자직 적층 복합재료의 인장-압축 피로특성을 평가하였다. 유리섬유/에폭시 4-매 주자직 적층 복합재료의 인장-압축 피로시험은 경사, 위사 그리고 ${\pm}45^{\circ}$ 방향으로 적층된 시험편에 대하여 수행하였다. 인장-압축 피로시험은 5Hz의 주파수를 갖으며, 응력비(R)는 -1로 수행하였다. 인장-압축 피로시험 수행 시 압축하중에 의한 시험편의 좌굴을 방지하기 위하여 좌굴방지지그를 설계하고 이를 시험에 적용하였다. 또한, Goodman 선도는 유리섬유/에폭시 4-매 주자직 적층 복합재의 피로특성과 수명을 평가하기 위해 사용하였다. 유리섬유/에폭시 4-매 주자직 적층 복합재료의 인장-압축 피로시험결과 경사방향 적층 복합재의 피로특성이 기존 금속재 대차에 적용되는 SM490에 비하여 우수한 것으로 나타났다.