• 제목/요약/키워드: Sepiolite

검색결과 31건 처리시간 0.018초

Respiratory Toxicity Study on Sepiolite

  • Chung, Yong-Hyun;Han, Jeong-Hee;Sung, Jae-Hyuck;Yu, Il-Je
    • 한국독성학회:학술대회논문집
    • /
    • 한국독성학회 2005년도 춘계 국제심포지엄 및 학술대회
    • /
    • pp.115-115
    • /
    • 2005
  • PDF

포항시 남부 현무암체의 단층점토에서 산출되는 Fe-세피올라이트 (Fe-rich Sepiolite from the Basalt Fault Gouge in the South of Pohang, Korea)

  • 손병서;황진연;이진현;오지호;손문;김광희
    • 한국광물학회지
    • /
    • 제29권1호
    • /
    • pp.11-22
    • /
    • 2016
  • 경북 포항시 남구 동해면 금광리 일대의 전기 마이오세 현무암층 내에 단층파쇄대의 중심에 약 5-10 cm의 폭을 가진 흑색의 단층점토가 길게 연장되어 나타났다. 이 단층점토에 대해 XRD, FTIR, DTA/TGA, SEM, TEM, XRF, EPMA 등으로 자세히 분석한 결과, Fe 성분을 다량 함유하는 Fe-세피올라이트인 것으로 확인되었다. 이 외에 단층파쇄대의 변질광물은 주로 스멕타이트인 것으로 나타났으며, 신선한 모암인 현무암에도 스멕타이트가 상당량 포함되어 나타났다. 이러한 구성광물의 산상으로 보아, Fe-세피올라이트는 현무암의 고화 형성 후에 다소 깊은 곳에서 단층작용과 함께 열수변질작용이 관여하여 형성된 것으로 사료된다.

담배용 흡착제들의 동공 특성에 관한 연구 (Studies on Pore Characteristics of Several Adsorbents)

  • 임광수;정용순;이영택
    • 한국연초학회지
    • /
    • 제16권2호
    • /
    • pp.181-190
    • /
    • 1994
  • Various active carbons were made from plant sources of coconut shell, pine tree, oak tree and lignite coal. Pore characteristics of these adsorbents were investigated. 1, With increasing activation time, specific surface area and pore volume increased, but the development of micropores was limited at a certain level. The average pore diameter, by BET, of coconut active carbon was 15.5-21.8$\AA$ and that of lignite carbon was 15.6-31.3$\AA$. The pore diameters of silica-gel, sepiolite and zeolite was 30.9$\AA$, 58.6$\AA$ and 55.7$\AA$, respectively. 2. The Horvath - Kawazoe micropore diameter of coconut shell active carbon was under 10.5$\AA$ and that of the other active carbon was under 20.9$\AA$ but silica-gel 33$\AA$, sepiolite 103 $\AA$ and zeolite was unexpectedly large to be 175$\AA$. From the difference between BET micropore diameter and Howath - Kawazoe diameter, it could be said that silica - gel has comparatively uniform pore diameter but sepiolite and zeolite have very uneven diameter. 3. Total pore volume of coconut shell active carbon was 0.27-1.04 cm3/g but that of the other active carbon, 0.23-0.62 cm3/g, was much lower than that of coconut shell active carbon. Hydrophilic adsorbent silica - gel and sepiolite showed big difference in specific surface area, but pore volumes of these were 0.47 and 0.56 cm3/g showing similar value and micropore volumes of these were, respectively, 0.06 cm3/g and 0.04 cm3/g. Total pore volume of zeolite was 0.1 cm3/g and that of micropore was only 0.02 cm3/g.

  • PDF

BIOFILTRATION OF GASEOUS TOLUENE USING ADSORBENT CONTAINING POLYURETHANE FOAM MEDIA

  • Amarsanaa, Altangerel;Shin, Won-Sik;Choi, Jeong-Hak;Choi, Sang-June
    • Environmental Engineering Research
    • /
    • 제11권1호
    • /
    • pp.1-13
    • /
    • 2006
  • In this study, conventional biofilters packed with flexible synthetic polyurethane (PU) foam carriers were operated to remove toluene from a contaminated air stream. PU foams containing various adsorbents (e.g., zeolite, sepiolite, dolomite and barite) were synthesized for the biofilter media and their adsorption characteristics of toluene were determined. Adsorption capacity of PU-adsorbent foam was in the order of PU-dolomite ${\approx}$ PU-zeolite > PU-sepiolite > PU-barite. During the biofiltration experiment, influent toluene concentration was in the range of 0-160 ppm and EBRT (i.e., empty bed residence time) was 45 seconds. Pressure drop of the biofilter bed was 4-5 mm $H_2O/m$ column height. The maximum removal capacity was in the order of PU-dolomite > PU-zeolite > PU-sepiolite > PU-barite, while the complete removal capacity was in the order of PU-dolomite > PU-sepiolite > PU-zeolite > PU-barite. The better biofiltration performance in PU-dolomite foam was because PU-dolomite foam had lower density and higher porosity than the others providing favorable conditions for microbial growth. The results of biodegradation kinetic analysis showed that PU-dolomite foam had higher maximum removal rate ($V_m\;=\;11.04\;g$ toluene/kg dry material/day) and saturation constant ($K_s\;=\;26.57\;ppm$) than the other PU foams. This supports that PU-dolomite foam was better than the others for biofilteration of toluene.

Sepiolite를 보강섬유로 사용한 단면보수 모르타르의 물리적 특성변화에 관한 연구 (A Study on the Physical Characteristics of Repair Mortar Using Sepiolite)

  • 이문환;송태협;이세현;박승호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
    • /
    • pp.337-340
    • /
    • 2006
  • Utilize several kinds of reinforcement fibers to control workability and surface crack in occasion of mortar used in dilapidated concrete section repair public law. Polypropylene or poly vinyl alcohol that is hydrophilic fiber etc. is used much usually with this reinforcement fiber. Reinforcement fiber does important action that control crack that enhances coherence between material and happens at dry contraction. In this study, wished to use Sepiorite that inorganic materials and affinity such as cement are excellent nature inorganic world fiber and improve repair mortar performance. In this study, as reinforcement fiber, wished to grasp physical characteristics that uses Sepioraiteu and happens this time and grasp application possibility of concrete's repair mortar.

  • PDF

울산 사문석광산에서 산출하는 세피오라이트의 광물학적 연구 (Mineralogy of Sepiolite from the Ulsan serpentine Mine)

  • 황진연
    • 한국광물학회지
    • /
    • 제4권2호
    • /
    • pp.108-118
    • /
    • 1991
  • 경남 울산군 농소면의 울산사문석광산에서 세피오라이트(sepiolite)가 발견되었다. 그래서 이 세피오라이트시료에 대해 X-선회절분석, 열분석, 적외선분광분석, 투과전자현미경관찰 및 화학분석을 행하여 그 결과를 기술하였다. 본 세피오라이트는 사문암과 염기성암체와의 접촉부에 발달된 열극충진상 세맥에서 산출된다. 이 세맥내에서 많은 암편들이 포함되어 있는데, 그 기질부분은 회백색을 띠며 연질이고 부드러운 가죽같은 느낌을 준다. 이 기질부분이 거의 순수한 세피오라이트로 구성되어 있다. X-선회절분석의 결과로부터 이 광물시료가 결정도가 높은 {{{{ alpha }}-세피오라이트에 해당된다는 것이 밝혀졌다. 이 세피오라이트의 화학성분은 Mg를 많이 함유하는 일반적인 세피오라이트와 유사하였다. 산상 및 광물학적 특성으로 볼 때 이 세피오라이트는 열수용액에서 직접 침전하여 형성된 것으로 사료된다.

  • PDF

화학세척제를 이용한 도자기의 철산화물 제거 특성 연구 (Chemical Cleaning of Iron Stains on Ceramics)

  • 박대우;장성윤;남병직;함철희;임성태
    • 보존과학회지
    • /
    • 제27권4호
    • /
    • pp.345-356
    • /
    • 2011
  • 금속산화물에 오염된 도자기 유물을 보존처리 하기 위해서는 경우에 따라 화학적 세척과정이 필요하다. 본 연구에서는 화학적 세척과정을 침적법과 습포법으로 구분하여, 침적법에서는 옥살산과 구연산의 농도에 따른 철산화물 제거특성을 확인하고자 하였다. 나아가 앞선 침적법의 결과를 토대로 spot 테스트를 거친 후, 태안 마도에서 출토된 도자기 유물에 습포법을 적용하여 철산화물을 제거하였다. 옥살산에 60시간 침적시 도자기 빙렬 내의 철산화물은 제거되었지만, 육안관찰에서 침적 3시간 이후부터 철산화물이 관찰되지 않기 때문에 보존처리현장에서는 유물의 안정성을 고려하여 0.25M 이하의 옥살산에 1~3시간동안 침적하는 것이 적당할 것으로 판단된다. 구연산에서는 60시간 침적시 철산화물은 제거되지 않았다. 이는 옥살산과의 분자량 차이 및 산도(acidity) 등에 의한 것으로, 빙렬 내에 침투한 철산화물을 제거할 때에는 구연산보다 옥살산이 좀 더 효과적이었다. 옥살산을 용제로 제작한 습포팩(벤토나이트, 세피올라이트, 활성탄소섬유, 셀라이트)을 오염된 백자태토에 10시간동안 도포 처리하여 철산화물은 제거되었지만, 유물적용성은 벤토나이트와 세피올라이트가 뛰어났다. 그래서 앞선 침적법의 결과를 토대로, 0.25M의 옥살산과 세피올라이트를 습포 팩으로 제조하여 태안 마도 출토 청자 및 백자에 적용하였다. 습포팩 1회 처리로 유물표면의 철산화물은 대부분 제거되었으나 오염물의 형태에 따라 적용횟수는 달라질 수 있을 것으로 판단되며, 세피올라이트에 의한 2차 오염을 방지하기 위한 세척도 함께 병행되어야 할 것이다.

천부지권 압력 하 해포석의 비등방적 압축 특성 및 상전이 연구 (Anisotropic Compression Behavior and Phase Transition of Sepiolite Under Moderate Pressure Conditions)

  • 윤서희;이용재
    • 광물과 암석
    • /
    • 제35권4호
    • /
    • pp.423-430
    • /
    • 2022
  • 자연산 해포석(Sepiolite, Mg8Si12O30(OH)4·12H2O)에 대해 물과 실리콘 오일을 압력매개체로 사용하여 압력 증가에 따른 구조적인 변화의 특성을 싱크로트론 X-선 회절 실험으로 연구하였다. 해포석은 실리콘 오일을 압력매개체로 사용한 환경에서는 약 3.6 GPa까지 압력의 증가에 따라 b-축이 비등방적으로 증가하는 음의 선형압축률(-0.0012 GPa-1)을 보이다가 7.7 GPa 에서는 감소하는 변화를 보였다. 물을 압력매개체로 사용한 실험에서는 b-축의 압력에 따른 증가의 정도가 약 두 배로 커지며(-0.0025 GPa-1) 강화된 음의 선형 압축률과 비등방적 압축 특성을 보이다가, 약 3.2 GPa, 280 ℃에서 스멕타이트 계열 광물인 스티븐자이트(Stevensite, Mg3Si4O10(OH)2·4H2O)로 상변화가 일어남이 XRD와 SEM을 통해 확인하였다. 해포석과 스티븐자이트의 체적탄성률(K0)과 선형압축률(β)를 구조적, 화학적으로 유사한 다른 광물의 값들과 비교하여 그 의미를 고찰하였다.

해포석이 시멘트 경화체의 특성에 미치는 영향 (The Effects of Sepiolite on the Properties of Portland Cement Mortar)

  • 강현주;송명신;김영식
    • 한국세라믹학회지
    • /
    • 제45권8호
    • /
    • pp.443-452
    • /
    • 2008
  • Shrinkage crack is a major concern for cement materials, especially for flat structures such as Korean On-Dol floor system, flooring for garages, and wall. One of the methods to reduce the adverse effects of shrinkage cracking is to reinforce cement materials with shot randomly distributed fibers. The efficiency of inorganic fibrous material to arresting cracks in cementitious composites was studied. Cement materials reinforced with five different qualities of inorganic fibrous material were tested. Contents of inorganic fibrous material were 1.0 kg, 1.5 kg, 2.0 kg, 2.5 kg, 3.0 kg by weight of cement mortar and C : S types of cement mortar were 1:3 and 1:4. W/C were 60% and 80%. Cement mortar of inorganic fibrous material reinforcement showed an ability to reduce the crack width and crack length significantly as compared to unreinforced cement mortar. $40%{\sim}60%$ drop in shrinkage crack of 1:4 cement mortar with 1.5 kg over was observed.