• 한국물환경학회지
• /
• 제36권6호
• /
• pp.489-499
• /
• 2020

Effective science-based management of the basin water resources requires an understanding of the characteristics of the streams, such as the baseflow discharge. In this study, the base flow was estimated in the two watersheds with the least artificial factors among the Nakdong River watersheds, as determined using the chemical hydrograph separation technique. The 16-year (2004-2019) discontinuous observed stream flow and electrical conductivity data in the Total Maximum Daily Load (TMDL) monitoring network were extended to continuous daily data using the TANK model and the 7-parameter log-linear model combined with the minimum variance unbiased estimator. The annual base flows at the upper Namgang Dam basin and the upper Nakdong River basin were both analyzed to be about 56% of the total annual flow. The monthly base flow ratio showed a high monthly deviation, as it was found to be higher than 0.9 in the dry season and about 0.46 in the rainy season. This is in line with the prevailing common sense notion that in winter, most of the stream flow is base flow, due to the characteristics of the dry season winter in Korea. It is expected that the chemical-based hydrological separation technique involving TANK and the 7-parameter log-linear models used in this study can help quantify the base flow required for systematic watershed water environment management.

• 플랜트 저널
• /
• 제12권2호
• /
• pp.24-30
• /
• 2016

이산화탄소 분리공정에 있어서 분리막 공정은 소형, 모듈성, 설치의 용이성, 작동의 유연성, 낮은 설치 비용 및 낮은 에너지 소비량 등의 장점들로 인하여 주목 받고 있다. 본 연구에서는 실험데이터와의 비교를 통해 교차흐름, 병류흐름, 향류흐름 3가지 모델의 정확도를 알아보았다. 실험에서 이용된 이산화탄소 분리공정을 가장 잘 나타내어주는 모델을 토대로 전산모사를 통하여 2단 막 분리 구조에서의 운전조건을 규명하고 분리막의 투과도 및 선택도가 분리성능에 미치는 영향을 알아보았다. 나아가 수증기 sweep을 이용하는 2단 막 분리 구조에서 열교환망 합성기법을 적용하여 열교환기 도입에 따른 소요 전력의 변화와 운전비용 절감효과를 살펴보았다.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1493-1499
• /
• 2004

This paper describes the speckle shearing interferometry, a non-destructive optical method, for quantitative estimation of void defect and monitoring separation defect inside of a pneumatic tire. Previous shearing interferometry has not supplied quantitative result of inside defect, due to effective factors. In the study, factors related to the details of an inside defect are classified and optimized with pipeline simulator. The size and the shape of defect can be estimated accurately to find a critical point and also is closely related with shearing direction. The technique is applied for quantitative estimation of defects inside of a pneumatic tire. The actual traveling tire is monitored to reveal the cause of separation and the starting points. And also unknown void defects on tread are inspected and the size and shape of defects are estimated which has good agreement with the result of visual inspection.

• 대한수의학회지
• /
• 제33권1호
• /
• pp.81-85
• /
• 1993

Gel electrophoresis has proven to be one of the most useful of DNA separation and purification. The new technique of pulsed field gel electrophoresis (PFGE) is high resolution separation of large size DNA moleculs. Conventional continuous gel electrophresis can not be separation of large DNA fragments(20~50 k base). Field inversion gel electrophoresis(FIGE) is very useful for large DNA molecules. We have found that a pulse ratio ; 2 : 1, time ; 24hrs., volts ; $10^{volts}/_{cm}$, start ; 0.45sec, end ; 1sec, is most effectively resolves DNA fragment in the 6~50k base.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.928-933
• /
• 2007

In this research, we investigated active vibration control based on wave-viewpoint using the longitudinal wave separation method. The control strategy is the one of active vibration control technique for generating vibration reduced zone and uses wave information including the directivity as the cost function. In order to get the wave information from the measured values, we proposed and examined the time-domain longitudinal wave separation method proper to real time application like active vibration control. Using the proposed method, we examine the performance and feasibility of active vibration control based wave view-point through the simulation. The related experimental verification and application is going to be expected in a near future.

• Journal of Korean Society for Atmospheric Environment
• /
• 제12권E호
• /
• pp.19-28
• /
• 1996

A pore concensation-based separation technique was studied experimentally using toluene and xylene in a nitrogen stream. The removal rate of toluene and xylene on a microporous ceramic membrane was enhanced by increasing the partial pressure difference across the membrane, but the selectivity was reduced with increasing flux of nitrogen. This was found both in vacuum and pressure modes of operation. The experimental results from this study suggest that the pores mear the inlet portion of the module were filled with the organic solvent while the pores near the exit section of the module were slightly opened as the solvent concentration was depleted along the module. In the case of xylene, the rate of N$_{2}$ permeation was reduced considerably relative to toluene, resulting in a much higher separation gactor. Condensibility of xylene appeared to be higher than that of toluene, the potential for pore condensation-based separation of xylene was also found to be higher than that for toluene.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.416-418
• /
• 2006

In this paper, a new acoustic echo cancellation approach based on the DUET algorithm and scaling factor estimation is proposed to solve the scaling ambiguity in case of blind separation based acoustic echo cancellation in a noisy environment. In hands-free full-duplex communication system. acoustic noises picked up by the microphone are mixed with echo signal. For this reason, the echo cancellation system may provide poor performance. For that purpose, a degenerate unmixing estimation technique, adjusted in the time-frequency domain, is employed to separate undesired echo signals and noises. Also, since scaling and permutation ambiguities have not been solved in the blind source separation algorithm, kurtosis for the desired signal selection and a scaling factor estimation algorithm are utilized in this rarer for the separation of an echo signal. Simulation results demonstrate that the proposed approach yields better echo cancellation and noise reduction performances, compared with conventional methods.

• The Journal of the Acoustical Society of Korea
• /
• 제27권1E호
• /
• pp.17-24
• /
• 2008

Blind speech separation (BSS) is well-known as a powerful technique for speech enhancement in many real world environments. In this paper, we propose a new application of BSS - acoustic echo cancellation (AEC) in a car environment. For this purpose, we develop a block-online BSS algorithm which provides robust separation than a batch version in changing environments with moving speakers. Simulation results using real world recordings show that the block-online BSS algorithm is very robust to speaker movement. When combined with AEC, simulation results using real audio recording in a car confirm the expectation that BSS improves double talk detection and echo suppression.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.532-543
• /
• 2004

The present work have been developed the interpretation processor including the behavior of material failure and the separation phenomena under transient dynamic loading (the operation of explosive bolt) using AUTODYN V4.3, SoildWork 2003 and TrueGrid V2.1 programs. It has been demonstrated that the interpretation in ridge-cut explosive bolt under dynamic loading condition should be necessary to the appropriate failure model and the basic stress of bolt failure is the principal stress. The use of this interpretation processor developing the present work could be extensively helped to design the shape and the amount of explosives in the explosive bolt having a complex geometry. It is also proved that the interpretation processor approach is an accurate and effective analysis technique to evaluate the separation mechanism in explosive bolts.

• Bulletin of the Korean Chemical Society
• /
• 제22권6호
• /
• pp.570-574
• /
• 2001

Magnesium isotope separation was investigated by chemical ion exchange with the 1-aza-12-crown-4 bonded Merrifield peptide resin using an elution chromatographic technique. The capacity of the novel azacrown ion exchanger was 1.0 meq/g dry resin. The heavier isotopes of magnesium were enriched in the resin phase, while the lighter isotopes were enriched in the solution phase. The single stage separation factor was determined according to the method of Glueckauf from the elution curve and isotopic assys. The separation factors of $^{24}Mg^{2+}$-$^{25}Mg^{2+}$, $^{24}Mg^{2+}$-$^{26}Mg^{2+}$, and $^{25}Mg^{2+}$-$^{26}Mg^{2+}$ were 1.008, 1.019, and 1.006, respectively.