• 열처리공학회지
• /
• 제26권4호
• /
• pp.173-177
• /
• 2013

Separation and recovery of valuable metals such as zinc, nickel or tin from copper alloy dross has recently attracted from the viewpoints of environmental protection and resource recycling. In this report, preliminary study on concentration and separation of tin from copper alloy dross using selective dissolution method was performed. The tin in the copper alloy dross did not dissolve in the nitric acid solution which could allow the concentration and separation of the tin from the copper alloy dross. Precipitation of tin as $H_2SnO_3$ (metastannic acid) occurred in the solution and transformed to tin dioxide ($SnO_2$) after drying process. The dried sample was heat-treated at low temperature and its phase characteristics, surface morphology and chemical composition were investigated.

• 한국결정성장학회지
• /
• 제24권2호
• /
• pp.84-87
• /
• 2014

Separation/recovery of valuable metals such as zinc, nickel or tin from copper alloy dross has recently attracted from the viewpoints of environmental protection and resource recycling. In this study, preliminary investigation on separation of tin (Sn) from copper alloy dross using selective dissolution method was performed. The tin in the copper alloy dross did not dissolve in an aqueous nitric acid solution which could allow the concentration/separation of tin from the copper alloy dross. Precipitation of tin as $H_2SnO_3$ (meta stannic acid)occurred in the solution and transformed to tin dioxide ($SnO_2$) after drying process. The dried sample was heat-treated at low temperature and its crystal structure, surface morphology and chemical composition were investigated.

• 한국재료학회지
• /
• 제19권2호
• /
• pp.111-114
• /
• 2009

For the fabrication of core-shell structure bimetallic lead-free solder balls, both the critical temperature ($T_{cr}$) for the phase separation of two immiscible liquid phases and the temperature coefficient of the interfacial tension between the two separated liquid phases are required. In order to obtain this information, the temperature dependence of the surface tension of 60%Bi-24%Cu-16%Sn(-REM) alloys was measured using the constrained drop method. The slope of the temperature dependence of the surface tension changed clearly at a critical temperature for the separation of two immiscible liquid phases. The critical temperature of the 60%Bi-24%Cu-16%Sn alloy was estimated to be 1097K. An addition of 0.05% Ce decreased the critical temperature to 1085K, whereas that of 0.05% La increased it to 1117K. It was found that the surface tension and its temperature coefficient of the 60%Bi-24%Cu-16%Sn alloy were slightly increased by the addition of 0.05% Ce and 0.05% La. In addition, additions of Ce and La increased the temperature coefficient of the interfacial tension.

• 토지주택연구
• /
• 제4권1호
• /
• pp.119-124
• /
• 2013

나노여과막은 일반적으로 하전막이며, 용질의 하전성, 막과의 상호작용에 의해서 특징 있는 분리특성을 보인다. 본 연구에서는 나노여과막에 의한 폐수 중의 중금속류의 제거에 미치는 하전특성을 조사했다. 크롬(Cr), 철(Fe), 구리(Cu), 아연(Zn), 비소(As), 주석(Sn), 납(Pb)을 각각 0.1mg/L 첨가한 모의폐수를 제조하여 나노여과막(a)와 나노여과막(b)를 이용하여 운전압력 0.24MPa, 온도 $25^{\circ}C$에서 여과실험을 수행하였다. 그 결과, 나노여과막(a)와 나노여과막(b)에 의한 염소 이온의 제거율은 12.8%, 3.5%였고, 황산이온의 제거율은 78%, 9.3%였고 TOC의 제거율은 70.4%, 26.2%이었다. 한편, 중금속의 제거율은 나노여과막(a)의 경우 크롬(Cr) 92.5%, 철(Fe) 90.9%, 구리(Cu) 93.1%, 아연(Zn) 92.6%, 비소(As) 74.6%, 주석(Sn) 97.3%, 납(Pb) 93.4%이었고, 나노여과막(b)의 경우는 크롬(Cr) 69.9%, 철(Fe) 84.6%, 구리(Cu) 87.0%, 아연(Zn) 73.3%, 비소(As) 15.2%, 주석(Sn) 80.1%, 납(Pb) 87.7%이었다. 여기서, 나노여과(a), 나노여과(b)의 경우 공통적으로 크롬, 철, 동, 아연, 주석, 납에 비하여 비소의 제거율은 상대적 낮았다. 상기 실험결과에서 폐수 중에 다량 함유되는 염소이온 및 황산이온에 대한 중금속류의 분리계수와 이온성분의 수중에서의 활동정도를 나타내는 인자인 이온 몰 전도도로 해석할 수 있었다. 그 결과, 몰 전도도 비가 큰 중금속 이온일수록, 나노여과막에 의한 중금속 이온의 제거율이 높아지는 경향을 알 수 있었다.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.352-357
• /
• 2012

$SnO_2$-mixed and Sn-doped $TiO_2$ nanoparticles were synthesized via a hydrothermal process. $SnO_2$-mixed $TiO_2$ nanoparticles prepared in a neutral condition consisted of anatase $TiO_2$ nanoparticles(diamond shape, ~25 nm) and cassiterite $SnO_2$ nanoparticles(spherical shape, ~10 nm). On the other hand, Sn-doped $TiO_2$ nanoparticles obtained under a high acidic condition showed a crystalline phase corresponding to rutile $TiO_2$. As the Sn content increased, the particle shape changed from rod-like(d~40 nm, 1~200 nm) to spherical(18 nm) with a decrease in the particle size. The peak shift in the XRD results and a change of the c-axis lattice parameter with the Sn content demonstrate that the $TiO_2$ in the rutile phase was doped with Sn. The photocatalytic activity of the $SnO_2$-mixed $TiO_2$ nanoparticles dramatically increased and then decreased when the $SnO_2$ content exceeded 4%. The increased photocatalytic activity is mainly attributed to the improved charge separation of the $TiO_2$ nanoparticles with the $SnO_2$. In the case of Sn-doped $TiO_2$ nanoparticles, the photocatalytic activity increased slightly with the Sn content due most likely to the larger energy bandgap caused by Sn-doping and the decrease in the particle size. The $SnO_2$-mixed $TiO_2$ nanoparticles generally exhibited higher photocatalytic activity than the Sn-doped $TiO_2$ nanoparticles. This was caused by the phase difference of $TiO_2$.

• 자원리싸이클링
• /
• 제23권2호
• /
• pp.53-60
• /
• 2014

폐 ITO 슬러지로부터 주석과 인듐을 분리하기 위해 염산 직접 침출방법과 환원 열처리($700^{\circ}C{\sim}1100^{\circ}C$)후 염산 침출방식을 고찰하였다. 폐 ITO 슬러지의 염산 직접 침출시 인듐의 침출율은 18.5%이고 주석의 침출율은 19.95% 이었다. 한편, 폐ITO 슬러지를 수소분위기하에서 $700^{\circ}C$, $800^{\circ}C$, $900^{\circ}C$, $1100^{\circ}C$로 열처리한 후에 염산을 이용하여 침출시에는 주석의 침출율이 97% 이상으로 개선되었고, 온도가 $800^{\circ}C$일 때 침출율이 98.2 %로 가장 효과가 좋았다. 주석 및 인듐이 침출된 혼합용액에서 주석의 분리 및 회수를 위해 침전법을 사용하였다. 침출용액의 pH를 2.0으로 조절할 경우, 주석은 99.69%가 침전되었으나 인듐은 10.3%만 침전되어 상호분리가 가능하다는 것을 확인하였다.

• 대한화학회지
• /
• 제15권6호
• /
• pp.366-369
• /
• 1971

The cation exchange chromatographic method for the analysis of Babbitt metal has been studied. The quantitative separation of the mixture of Sb, Cu, Pb, and Sn ions has been obtained by elution, through 5cm column of resin, Rexyn 101 (Na form, 100~200 mesh), using 0.1 M NaCl solution for Sb, pH 4.5 and pH 7 solution of 0.01 M Na-Citrate + 0.1 M $NaNO_3$ for Cu and Pb, and 2NHCl solution for Sn as eluent.

• 한국분말재료학회지
• /
• 제21권2호
• /
• pp.142-146
• /
• 2014

Fundamental experiences have been studied for development of pre-treatment process of Sn by-products such as solders. Dry and wet separation/recovery processes were considered by the differences of physical properties. The by-products, which are analyzed by solder metal and oxides. The metal and oxide were simply separated by dry ball-milling process for 12 hours, after that recovery metal powder might be reusable as lead or lead-free solders. In terms of wet separation process, samples were dissolved in $HNO_3+H_2O_2$ and the precipitation were analyzed by $SnO_2$. Overall efficiency of recovery might be increasing via developing simple pre-treatment process.

• 자원리싸이클링
• /
• 제20권2호
• /
• pp.60-66
• /
• 2011

염화루테늄 용액에서 루테늄의 분리 및 회수를 위한 기초 연구로 TBP 및 Cyanex923을 이용하여 루테늄의 용매추출 거동을 조사하였다. 루테늄의 추출율에 영향을 미칠 수 있는 수용액상의 염산농도 및 염소이온 농도, 유기상의 추출제 농도, 온도 등에 대해서 고찰하였고, 유기상으로 추출원 루테늄의 탈거거동에 대해서도 조사하였다. 또한 백금, 비스무스, 납, 구리, 철, 주석 등과의 혼합용액에서 염산농도에 따라 각 성분들의 추출거동을 조사하였다. 실험결과 루테늄의 추출을 위해서는 Cyanex923이 효과적이었다. 그러나 TBP를 사용할 경우 루테늄의 추출율은 낮으나 백금, 비스무스, 주석 등의 불순물을 제거하는 데는 효과적이었다.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.259-266
• /
• 2019

Tuning of electro-optical properties of nano-structured $SnO_2:Ga$ powders in a micro drop fluidized reactor (MDFR) was highly effective to enhance the activities of powders to be used as sensor materials. The tuning was conducted continuously in a facile one-step process during the formation of powders. The microscopic hydrodynamic forces affected the band gap structure and charge transfer of $SnO_2:Ga$ powders through the oxygen and interfacial tin vacancies by providing plausible pyro-hydraulic conditions, which resulted in the decrease in the electrical resistance of the materials. The analyses of room-temperature photoluminescence (PL) spectra and FT-IR exhibited that the tuning could improve the surface activities of $SnO_2:Ga$ powders by adjusting the excitation as well as separation of electrons and holes, thus maximizing the oxygen vacancies at the surface of the powders. The scheme of photocatalytic mechanism of $SnO_2:Ga$ powders was also discussed.