• 한국막학회:학술대회논문집
• /
• 한국막학회 2000년도 추계 총회 및 국제학술발표회
• /
• pp.47-49
• /
• 2000

No Abstract, See Full Text

• 멤브레인
• /
• 제14권4호
• /
• pp.298-303
• /
• 2004

PTMSP/PDMS-PEI 복합막을 제조하고, 막의 특성을 FT-IR, $^1$H-NMR, DSC, TGA, GPC, SEM을 사용하여 조사하였다. 제조된 PTMSP/PDMS copolymer의 수평균분자량((equation omitted))은 501,516이었고, 중량평균분자량((equation omitted))은 675,560이었다. 제조된 고분자 복합막에 의한 $H_2$/$N_2$ 혼합기체분리는 $25^{\circ}C$에서 압력의 변화에 따라 조사하였다. PTMSP/PDMS-PEI 복합막들의 수소에 대한 분리인자($\alpha$, $\beta$, (equation omitted)) 값은 투과셀의 압력이 증가하면 증가하였다. PTMSP/PDMS-PEI 복합막의 수소에 대한 $\alpha$, $\beta$, (equation omitted) 값은 $\Delta$P 345.55 kPa와 $25^{\circ}C$에서 각각 21.50, 49.14, 1.84이었다.

• 상하수도학회지
• /
• 제32권1호
• /
• pp.47-53
• /
• 2018

This study investigated phosphorus removal from secondary treated effluent using coagulation-membrane separation hybrid treatment to satisfy strict regulation in wastewater treatment. The membrane separation process was used to remove suspended phosphorus particles after coagulation/settlement. Membrane separation with $0.2{\mu}m$ pore size of micro filtration membrane could reduce phosphorus concentration to 0.02 mg P/L after coagulation with 1 mg Al/L dose of polyaluminum chloride (PACl). Regardless of coagulant, the residual concentration of phosphorus decreased as the dose increased from 1.5 to 3.5 mg Al/L, while the target concentration of 0.05 mg P/L or less was achieved at 2.5 mg Al/L for the aluminum sulfate (Alum) and 3.5 mg Al/L for PACl. Moreover, alum showed better membrane flux as make bigger particles than PACl. Alum showed a 40% of flux decrease at 2.5 mg Al/L dose, while PACl indicated a 50% decrease of membrane flux even with a higher dose of 3.5 mg Al/L. Thus, alum was more effective coagulant than PACl considering phosphorus removal and membrane flux as well as its dose. Consequently, the coagulation-membrane separation hybrid treatment could be mitigate regulation on phosphorus removal as unsettleable phosphorus particles were effectively removed by membrane after coagulation.

• 멤브레인
• /
• 제31권3호
• /
• pp.170-183
• /
• 2021

파울링은 멤브레인 성질의 효과를 저해한다는 점에서 큰 문제다. 멤브레인의 표면적인 특성에 파울링의 영향이 감소하는 문제를 해결하기 위해 다양하고 기발한 멤브레인의 패턴화가 제시되었다. 패턴화된 멤브레인의 진행 과정과 멤브레인의 파울링 효과의 분리 과정을 이 글을 통해 짚어보려 한다. 패턴화된 멤브레인의 효과를 최대한 활용하는 다양한 분리 과정을 분석해야 하는데 바로 나노여과, 역삼투, 미세여과, 한외여과, 투과증발이다. 이러한 분리 과정들을 사용하면 파울링 효과를 줄이는데 큰 효과가 있다는 점이 증명되었다. 또한, 패턴화된 멤브레인에 이로운 요소도 더해진다. 각각의 패턴화된 멤브레인과 분리 과정들은 플럭스, 염 제거율, 친수성 등에 대한 임계값을 구하는데 주목할 만한 결과가 나왔지만, 아직 파악되지 않은 부분을 확인할 필요도 있다. 본 총설에서는 분리공정을 위한 패턴화된 멤브레인의 효과에 대해 논의할 것이다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 추계 총회 및 학술발표회
• /
• pp.1-6
• /
• 1994

Many useful biomaterials like enzymes are contained in yeast cells. However, the release of these intracellular biomateriais from the cells is required to recover them with hot water, solvent or various cell breakage methods of mechanical or non mechanical ones. The cell lysis or breakage of yeast is usually made by solvent like ethyl acetate and mechanical disintrgration with high pressure homogenizer or agitating beads mill. The separation of cell debris (i.e. solid liquid separation) is done by centrifuge or membrane depending on the recovery conditions. The features of both separation methods are shown in Tables 1 and 2. As it is often difficult to obtain a clear supernatant by centrifuge from the suspension containing cell debris, the membrane separation is also often used to gel a clear supernatant. In this report we introduce the several applications of membrane separation to separate the cell debris of yeast disintegrated chemically or mechanically and to recover the intracellular biomaterials.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 제2회 하계분리막 Workshop
• /
• pp.33-43
• /
• 1994

It is the purpose of this paper to review the recent developments and future trends in various membrane processes, which will result in energy savings. Historically, there was a long period of academic curiosity in membrane research covering from gas separation to reverse osmosis. With advent of asymmetric membrane technology, many membrane processes proved to be energy efficient than the conventional separation methods. Thus, membrane technology has gained wide acceptance from many sectors of industry. The commercial sale of membranes is still modest compared to the major technologies, but it is one of the fastest growing industries. Recently the U.S.Department of Energy conducted a study (1) to evaluate and prioritize research needs in the membrane separation industry in order to foster and better support the deveolpment of energy-efficient new technologies. The National Science Foundation (U.S.A.) did also do a similar investigation. Both agencies have arrived neary at the same conclusion, that is, membrane separations can offer many new and alternative methods of separations that are more energy efficient than existing processes. This paper is largely based on these findings.

• Bulletin of the Korean Chemical Society
• /
• 제24권9호
• /
• pp.1333-1338
• /
• 2003

Hollow Fiber flow field-flow fractionation (HF-FlFFF) has been tested in polyacrylonitrile (PAN) membrane channel in order to compare it with polysulfone (PSf) membrane channel. It has been experimentally shown that the separation time of 0.05-0.304 ${mu}m$ polystyrene latex (PSL) standards in PAN membrane channel is shorter than that in PSf channel by approximately 65%. The optimized separation condition in PAN membrane is ${\dot V}_{out}/{\dot V}_{rad}=1.4/0.12\;mL/min$, which is equal to the condition in PSf membrane channel. In addition both the resolution ($R_s$) and plate height (H) in PAN membrane channel are better than that in PSf membrane channel. The membrane radius was obtained by back calculation with retention time. It shows that the PSf membrane is expanded by swelling and pressure, but the PAN membrane doesn't expand by swelling and pressure.

• 멤브레인
• /
• 제10권2호
• /
• pp.55-65
• /
• 2000

다공성 실리카 막을 졸겔법에 의해서 Si(${OC}_2H_5)_4-H_2O$ 로부터 제조하고, 막의 특성을 TG-DTA, XRD, IR, BET, SEN, TEM을 사용하여 조사하였다. 다공성 실리카 막 제조를 위한 Si(${OC}_2H_5)_4$ : $H_2O4$ : $H_2O$ : $C_2H_5{OH}$의 최적 몰비는 1 : 4.5 : 4 이었다. 100$^{\circ}C$~1100$^{\circ}C$~에서 열처리된 막의 비표면적은 3.8 $m^2$/g~902.3$m^2$/g 이었으며, 기공크기는 20$\AA$~50$\AA$이었다. 300$^{\circ}C$~~700$^{\circ}C$~범위에서 열처리된 막의 입자크기는 15nm~30nm이며, 열처리 온도가 증가하면 입자의 크기도 증가하였다. 이렇게 제조한 다공성 실리카 막으로 $H_2$/$N_2$ 혼합기체를 분리하는데 응용하였으며, 다공성 실리카 막에 의한 $H_2$/$N_2$혼합기체분리는 Knudsen flow와 surface flow에 의해서 일어나며 주로 surface flow에 의존하였다. 다공성 실리카 막의 $H_2$/$N_2$ 혼합기체에 대한 real separation factor($\alpha$)는 155.15 cmHg($\Delta$P)와 $25^{\circ}C$에서 5.17이었으며, real separation factor($\alpha$), head separation factor ($\beta$), tail separation factor$\bar{B}$)는 압력이 증가하면 증가하였다.

• 한국응용과학기술학회지
• /
• 제13권3호
• /
• pp.95-103
• /
• 1996

In the separation of toluene/n-heptane mixture by the emulsion type liquid membrane in an batch system, the effect of surfactant on the separation factor and membrane stability was studied over the surfactant concentration ranging form 0.1 to 1.5wt％ at the contact time of 5 and 10 minutes. and the settling time of 5 and 10 minutes. The surfactant used was sodium lauryl sulfate. The separation factor reached its maximum value at the surfactant concentration of 0.5wt％ for surfantant. It was found that the percentage of membrane breakup reached its minimum values and the separation factor showed its maximum value at the surfactant concentration of 0.5wt%. which confirmed that efficient separation could be effect when emulsion liquid membrane was stable because of low membrane breakup.

• 한국응용과학기술학회지
• /
• 제16권1호
• /
• pp.95-103
• /
• 1999

In the separation of toluene/n-heptane mixture by the emulsion type liquid membrane in a batch system, the effect of surfactants on the separation factor and membrane stability were studied over the surfactant concentration ranging from 0.1 to 1.5 wt% at the contact time of 5 and 10 minutes and the settling time 5 and 10 minutes. The surfactants used were triethanol amine lauryl sulfate. The separation factor reached its maximum value at the surfactant concentration of 0.5 wt%. It was found that the percentage of membrane breakup reached its minium values and the separation factor showed its maximum value at the surfactant concentration of 0.5 wt%, which confirmed that efficient separation could be effect when emulsion liquid membrane were stable because of low membrane break up.