• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.73-80
• /
• 2005

Injection molding is the most widely used process for the industrial forming of plastic articles. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of welding parts in injection-molded products is assessed. And the effects of fiber content and injection mold shapes on the fiber orientation in case of fiber reinforced polymeric composites are studied experimentally.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.4
• /
• pp.1-7
• /
• 2006

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line in injection-molded products is assessed. And the effects of fiber content and injection mold-gate conditions on the fiber orientation are also discussed.

• Journal of computational fluids engineering
• /
• v.22 no.1
• /
• pp.8-14
• /
• 2017

In this paper, separated flow characteristics is studied using the RANS(Reynold-averaged Navier-Stokes) modeling. The analysis is performed for the NASA's hump configuration which is the combination of a flat plate and a hump. This configuration was used in NASA's flow control workshop and it was one of validation cases for RANS and LES simulations. The separation occurs at the 65% of model length where a slot is positioned for the flow control. No flow control case and steady suction case are studied using RANS modeling. The Spalart-Allmaras model and the SST(Shear Stress Transport) model are applied and their accuracy are compared. To correlate CFD analysis with experimental data, the optimal boundary condition was investigated and the effect of a cavity around the slot is studied for the no flow case.

• Health Policy and Management
• /
• v.11 no.4
• /
• pp.88-108
• /
• 2001

Separation of prescribing and dispensing practice in Korea has changed the service pattern of the pharmacy. The prescription dispensing activities, however, are concentrated excessively on the pharmacies near hospitals or clinics. Thus this study was conducted to estimate the number of optimal dispensing cases for the community pharmacy. Forty-six pharmacies were selected using systematic stratified random sampling method, and ninety-five pharmacists were interviewed on their workload of dispensing and other activities at pharmacies. One hundred and seventy prescriptions were chosen based on the length of drug administration and drug dosage form, and the dispensing time was measured by time-watch method. Also pharmacy benefit claims data were analyzed to identify the characteristics of the pharmacies which performed more than optimal dispensing cases. According to the study results, the average work time per pharmacist per day was found to be 10hours 32minutes and the dispensing activities occupied 7hours 36minutes. It took 5.72minutes on average for each dispensing case. The optimal dispensing case was estimated as 75 cases under the condition of 10hours 32minutes work time and 6% allowance rate. Even though the pharmacies near hospitals or clinics participated dispensing services actively, only pharmacies near clinics dealt with more than optimal dispensing cases. For the pharmacies near hospitals they dealt with less than optimal cases, but drug administration period per prescription was almost 3 times longer than that of pharmacies near clinics. Thus the intensity of dispensing activities such as drug administration period is to be considered to estimate optimal dispensing cases more accurately.

• Resources Recycling
• /
• v.10 no.6
• /
• pp.35-42
• /
• 2001

A study was conducted in order to remove Poly vinyl chloride (PVC) from granular plastic mixture by using Air Table. The motion of plastic particle on Air Table was investigated, and separation test on the plastic mixture with the mixing ratio of PVC 10% and PE 90% was conducted. At the optimum condition obtained from this study, that is frequency of 9.2Hz, air velocity of 1.05 m/sec, End-slope of $7.5 ^{\circ}$, Side-slope of $1^{\circ}$, Feeding speed of 450 g/min, etc., we could separate the PE-PVC mixture to PE (99.96% grade and 98.9% yield) and PVC (88.7% grade and 99.6% yield).

• Nuclear Engineering and Technology
• /
• v.45 no.1
• /
• pp.61-66
• /
• 2013

Among the radioactive wastes generated from the nuclear power plant, a radioactive nuclide such as $^{129}I$ is classified as a difficult-to-measure (DTM) nuclide, owing to its low specific activity. Therefore, the establishment of an analytical procedure, including a chemical separation for $^{129}I$ as a representative DTM, becomes essential. In this report, the adsorption and recovery rate were measured by adding $^{125}I$ as a radio-isotopic tracer ($t_{1/2}$ = 60.14 d) to the simulation sample, in order to measure the activity concentration of $^{129}I$ in a pressurized-water reactor primary coolant. The optimum condition for the maximum recovery yield of iodine on the anion exchange resins (AG1 x2, 50-100 mesh, $Cl^-$ form) was found to be at pH 7. In this report, the effect of the boron content in a pressurized-water reactor primary coolant on the separation process of $^{129}I$ was examined, as was the effect of $^3H$ on the measurement of the activity of iodine. As a result, no influence of the boron content and of the simultaneous $^3H$ presence was found with activity concentrations of $^3H$ lower than 50 Bq/mL, and with a boron concentration of less than 2,000 ${\mu}g/mL$.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.215-218
• /
• 1990

An ion chromatographic method based on indirect photometric detection of UV transparent anions was developed. Separation of anion was accomplished on strong anion exchange column (Waters SAX) using UV detector at 254 nm. Among examined UV-active additives (Dns-H, Dns-glu, Dnsser, Dns-val), Dns-glu showed the highest sensitivity. Studies on the effects of the pH and ionic strength of eluent revealed that the increase of pH and ionic strength of the eluent decreased capacity factor. The best eluent for the separation of acetate, fluoride, chloride, nitrate and bromide was $1\;{\times}\;10^{-4}M$ Dns-glu in 5 mM phosphate buffer (pH 6.30). The detection limit of chloride ion was 2.1 ng in this condition.

• Clean Technology
• /
• v.10 no.2
• /
• pp.89-100
• /
• 2004

The optimization for the water bath design and the skimmer installation are conducted to separate floated-sludge from the waste water in a water bath of a painting booth. VOF(volume of fluid) model is used to analyze the flow pattern of sludge-water-air mixture in a water bath. From the results of numerical analysis, the design criteria of the skimmer, the separation plate and the sludge inlet port of a water bath are obtained for effective sludge separation from water in bath. Furthermore, the installation condition of the skimmer immersed in water is optimized to minimize entrained air and pressure loss.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.10
• /
• pp.2978-2982
• /
• 2013

A doubly tethered $N-CH_3$ amide chiral stationary phase (CSP 4) based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was applied to the resolution of an antiarrythmic agent, tocainide, and its analogues and the chromatographic resolution results were compared with those on a singly tethered N-H amide CSP (CSP 1), a singly tethered $N-CH_3$ amide CSP (CSP 2) and a doubly tethered N-H amide CSP (CSP 3) under an identical aqueous mobile phase condition. CSP 4 was found to be generally better than other CSPs in terms of the separation factors (${\alpha}$) and resolutions (RS). The retention times of analytes denoted by the retention factors ($k_1$) on CSP 4 were quite long compared to those on other CSPs because of the improved lipophilicity of CSP 4. The long retention times of analytes on CSP 4 were successfully controlled by the addition of a small amount of ammonium acetate to aqueous mobile phase without hurting the chiral recognition efficiency. The variation of the content and type of organic and acidic modifier in aqueous mobile phase was found not to change the chiral recognition efficiency significantly.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.1
• /
• pp.92-97
• /
• 2007

The present paper deals with gaseous carbon dioxide separation by a commercial adsorbent: X-type zeolite. Experimental work was carried out at an ambient condition focusing on how well meeting to the national guideline. A few types of reactor and material were examined, and practical capability was found in a granular bed type reactor with the flow of 2.5 CMM. An optimum design of reactor and adsorbent could provide the required concentration, less than 2500 ppm, for the continuous operation up to 10 hours. More work including automatic regeneration is now underworking.