• 대한기계학회논문집B
• /
• 제41권5호
• /
• pp.321-328
• /
• 2017

본 연구에서는 고온측과 저온측의 온도 예측을 위한 볼텍스 튜브 모델을 개발하였다. 볼텍스 튜브 모델은 시스템 식별 방법을 기반으로 개발하였으며, 개발된 볼텍스 튜브 모델은 ARX(Auto-Regressive with eXtra inputs)모델을 기반으로 하여 설계되었다. 본 연구에서 유도된 다항식 모델은 모델의 정확성을 확인하기 위해 실험데이터와 검증하였다. 또한, 유도된 모델은 안정성 검사 통과를 보여준다. 저온측 스로틀 밸브 각도를 변경하였을 때, 적절히 온도 분리가 이루어지는 것을 확인하였으며, 동적응답을 확인하기 위해 저온측 스로틀 밸브 각도를 변경 시켰을 경우, 볼텍스 튜브 모델의 온도가 적절히 분리 되는 것을 확인할 수 있다. 결론적으로, 개발된 볼텍스 튜브 모델을 저온측 스로틀 밸브 각도에 따라 온도 분리 예측이 가능하다는 것을 확인할 수 있다.

• 한국항공우주학회지
• /
• 제31권6호
• /
• pp.1-7
• /
• 2003

본 연구에서는 3차원 대칭형 날개의 정상/비정상상대에서의 공기력 특성을 Vortex 패널법을 이용하여 수치적으로 연구했다. 이 프로그램은 날개 표면에 분포된 x, y 방향에 따라 선형적으로 변화는 와(Vortex)를 이용하는 프로그램을 기반으로 하여 3차원 날개 주위의 비압축성 포텐셜 흐름에 적용하였고 박리와 후류의 변형은 고려하지 않았다. NACA Airfoil 자료와 비교한 계산결과는 매우 만족스러운 일치를 보여주었다. 또한 갑작스러운 pitch-up운동과 일정한 각속도로 피칭운동을 하는 비정상 날개에 대해서도 본 방법을 적용하였다. 비정상 상태의 연구에서는 출발와류의 생성과 시간에 따른 위치를 고려함으로서 출발와류가 날개의 공기력 특성에 미치는 영향을 계산하였다. 본 방법은 피칭이나 플래핑, 회전익 해석등의 더 복잡한 경우에도 적용되어질 수 있다.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.337-346
• /
• 2002

Wind tunnel pressure measurements and numerical simulations based on the Reynolds Stress Model (RSM) are compared with full and model scale data in the flow area of impingement, separation and wake for $60^{\circ}$ and $90^{\circ}$ wind azimuth angles. The phase averaged fluctuating pressures simulated by the RSM model are combined with modelling of the small scale, random pressure field to produce the total, instantaneous pressures. Time averaged, rsm and peak pressure coefficients are consequently calculated. This numerical approach predicts slightly better the pressure field on the roof of the TTU (Texas Tech University) building when compared to the wind tunnel experimental results. However, it shows a deviation from both experimental data sets in the impingement and wake regions. The limitations of the RSM model in resolving the intermittent flow field associated with the corner vortex formation are discussed. Also, correlations between the largest roof suctions and the corner vortex "switching phenomena" are observed. It is inferred that the intermittency and short duration of this vortex switching might be related to both the wind tunnel and numerical simulation under-prediction of the peak roof suctions for oblique wind directions.

• Wind and Structures
• /
• 제20권2호
• /
• pp.327-347
• /
• 2015

This paper investigates the effects of Reynolds number (Re) on the aerodynamic characteristics of a twin-deck bridge. A 1:36 scale sectional model of a twin girder bridge was tested using the Wall of Wind (WOW) open jet wind tunnel facility at Florida International University (FIU). Static tests were performed on the model, instrumented with pressure taps and load cells, at high wind speeds with Re ranging from $1.3{\times}10^6$ to $6.1{\times}10^6$ based on the section width. Results show that the section was almost insensitive to Re when pitched to negative angles of attack. However, mean and fluctuating pressure distributions changed noticeably for zero and positive wind angles of attack while testing at different Re regimes. The pressure results suggested that with the Re increase, a larger separation bubble formed on the bottom surface of the upstream girder accompanied with a narrower wake region. As a result, drag coefficient decreased mildly and negative lift coefficient increased. Flow modification due to the Re increase also helped in distributing forces more equally between the two girders. The bare deck section was found to be prone to vortex shedding with limited dependence on the Re. Based on the observations, vortex mitigation devices attached to the bottom surface were effective in inhibiting vortex shedding, particularly at lower Re regime.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.69-76
• /
• 2020

In the present study, we investigate the flow separation characteristics of a paraglider canopy model by tuft visualization. The experiment is conducted at Re = 3.3×105 in a wind tunnel large enough to contain the three-dimensional paraglider canopy model, where Re is Reynolds number based on the mean chord length and the free-stream velocity. The flow separation characteristics of the canopy model near the wing root are similar to those of a two-dimensional airfoil with a cross-section similar to the model. On the other hand, near the wingtip region, the flow separation is suppressed by the downwash induced by the wingtip vortex. As a result, as the angle of attack increases, the flow separation occurs from the wing root region of the canopy model and develops toward the wingtip.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.473-478
• /
• 2003

평행한 벽 사이에 원형배관(circular pipeline)을 놓고 그 주위의 유동특성에 대한 수치연구를 수행하였다. 비압축성 유체를 가지고, Navier-Stokes 방정식을 풀었고 3차 풍상(upwind) 차분의 수치해법을 이용하였다. 한쪽 벽과의 거리가 매우 작아질 때, 볼텍스 떨어짐이 상당히 억압되는데 이것은 벽 경계와의 상호 박리 작용 때문으로 간수된다. 본 연구는 레이놀드 수의 변함과 물체가 벽에 접근함에 따른 볼텍스 떨어짐의 특성을 규명하는데 있다. 원형배관 후류와 평행벽내 유기된 박리의 상호작용을 집중적으로 다루며 서로 다른 조건에서 박리와 와역한(vorticity dynamics)의 특성을 해석하였다.

• 한국세라믹학회지
• /
• 제47권2호
• /
• pp.113-116
• /
• 2010

The silica coated $Fe_3O_4$ nanoparticles have been synthesized using a micro-emulsion method. The $Fe_3O_4$ nanoparticles with the sizes 6 nm in diameter were synthesized by thermal decomposition method. Hydrophobic $Fe_3O_4$ nanoparticles were coated silica using surfactant and tetraethyl orthosilicated (TEOS) as a $SiO_2$ precursor. Shell thickness of silica coated $Fe_3O_4$ can be controlled (11~20 nm) through our synthetic conditions. The $Fe_3O_4$ and silica coated $Fe_3O_4$ nano powders were characterized by transmission electron microscopy (TEM), x-ray diffraction (XRD) and vortex magnetic separation (VMS).

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.452-455
• /
• 2004

The influence of wake flow on a flat-plate blade having different shapes near the hailing edge has been investigated in this paper. Two different shapes near the trailing edge namely the pressure surface cutting (TP) and the suction surface cutting (TS) have been used. The calculation has been performed for two different angles of attack (a =10 and 15 degree) in both the cases. RANS equations have been solved using SST-model as a turbulence closure. Cp and CL values obtained for TS are higher compared to those obtained for TP. Also, the vorticity distribution obtained in case of TS is stronger as compared to that obtained in the case of TP The Karmann Vortex is observed in both the cases but it is more clear in TS case. It is found that in the case of TS, flow separation does not occur upto the trailing edge on both the suction and the pressure sides of the blade while in the case of TP, the flow separateson the pressure surface near the trailing edge of the flat-plate blade.

• Wind and Structures
• /
• 제34권5호
• /
• pp.451-467
• /
• 2022

The flow around a high-speed train with three underbody structures in the bogie area is numerically investigated using the improved delayed detached eddy simulation method. The vortex structure, pressure distribution, flow field structure, and unsteady velocity of the wake are analyzed by vortex identification criteria Q, frequency spectral analysis, empirical mode decomposition (EMD), and Hilbert spectral analysis. The results show that the structures of the bogie and its installation cabin reduce the momentum of fluid near the tail car, thus it is easy to induce flow separation and make the fluid no longer adhere to the side surface of the train, then forming vortices. Under the action of the vortices on the side of the tail car, the wake vortices have a trend of spanwise motion. But the deflector structure can prevent the separation on the side of the tail car. Besides, the bogie fairings do not affect the formation process and mechanism of the wake vortices, but the fairings prevent the low-speed fluid in the bogie installation cabin from flowing to the side of the train and reduce the number of the vortices in the wake region.

• 대한조선학회논문집
• /
• 제59권4호
• /
• pp.225-234
• /
• 2022

The flow field measurement above whole area of the flight deck on 'Landing Platform Helicopter (LPH)' was performed by using PIV system in wind tunnel. In various heading angle conditions (0deg, -30deg, -45deg, -60deg, -75deg and ±90deg), the velocity fields such as U velocity & V velocity were measured at three different height above flight deck. Due to the geometrical characteristics of several bodies like deck, crane and super-structure, various vortex were generated. When the heading angle is 0deg, the deck edge vortex by flight deck and massive separation by super-structure were clearly observed by visualization with smoke and PIV, respectively. In other heading angles, the acceleration of flow in space between crane and super-structure were detected. And area with flow separation by super-structure is directly related to the heading angle of vessel.