• 한국전산유체공학회:학술대회논문집
• /
• 1996.05a
• /
• pp.46-51
• /
• 1996

The flow field around a three dimensional minivan-like body has been simulated. This study solves 3-D unsteady incompressible Navier-Stokes equations on a non-orthogonal curvilinear coordinate system using second-order accurate schemes for the time derivatives, and third/second-order scheme for the spatial derivatives. The Marker-and-Cell concept is applied to efficiently solve continuity equation. The fourth -order artificial damping is added to the continuity equation for numerical stability. A H-H type multi-block grid system is generated around a three dimensional minivan-like body. Turbulent flows have been modeled by the Baldwin-Lomax turbulent model. The simulation shows three dimensional vortex-pair just behind body. And the flow separation is also observed the rear of the body. It has concluded that the results of present study properly agree with physical flow phenomena.

• Journal of computational fluids engineering
• /
• v.14 no.3
• /
• pp.9-15
• /
• 2009

Numerical investigation has been carried out for laminar flow past an inclined square cylinder in cross freestream. In particular, inclination of a square cylinder with respect to the main flow direction can cause sudden shift of the separation points to other edges, resulting in drastic change of flow-induced forces on the cylinder such as Strouhal number (St) of vortex shedding, drag and lift forces on the cylinder, depending upon the inclination angle. Collecting all the numerical results obtained, we propose contour diagrams of drag/lift coefficients and Strouhal number on an Re-Angle plane. This study would be the first step towards understanding flow-induced forces on cylindrical structures under a strong gust of wind from the viewpoint of wind hazards.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.85-88
• /
• 2012

루프 페어링은 화물차의 주행저항 및 유도항력을 줄이기 위해 설치되는 장치 중 하나이다. 이 장치는 화물차의 지붕 윗부분에 설치하여 화물차가 받는 항력을 줄이는데 사용이 된다. 이번 과제에서는 루프 페어링의 효과에 대해 유체역학적인 증명 및 확인을 위해 루프 페어링의 설치 전-후 트럭의 형상에 따른 유동의 변화와 항력계수의 값을 EDISON CFD를 사용하여 구한 후 각각 비교 하였다. 이를 위해 EDISON CFD의 압력 contour와 stream line, 정압계수(Cp)그래프를 통해 트럭의 주행 중 발생하는 박리현상을 가시적으로 확인하였고, 항력계수(Cd)값을 비교하는 것을 통해 루프 페어링을 설치한 경우가 미설치된 경우보다 주행 시 더욱 유리하다는 것으로 결론을 내렸다.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.173-177
• /
• 2005

The heat/mass transfer characteristics on the plane tip surface of a high-turning first-stage turbine rotor blade has been investigated by employing the naphthalene sublimation technique. The heat/mass transfer coefficient is measured for four tip clearance height-to-chord ratios of h/c = 1.0%, 2.0%, 3.0%, and 4% at the Reynolds number of $2.09{\times}105$. The result shows that at lower h/c, there exists a strong flow separation/re-attachment process, which results in severe thermal load along the pressure-side comer. As h/c increases, the re-attachment is occurred further downstream of the pressure-side comer with lower thermal load. At higher h/c, a pair of vortices on the tip surface near the leading edge are found along the pressure-side and suction-side comers, and the pressure-side tip vortex have significant influence even on the mid-chord local heat transfer.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.6
• /
• pp.708-717
• /
• 2007

In the present study, one of the widely applied equations for gas-solid cyclones, Leith and Licht model, was evaluated based on the 3-D CFD technique. The initial and boundary values of radial position and tangential velocity obtain-ed from the CFD simulation enabled complete calculation of the nonlinear second differential equation. This approach showed about 30% errors between calculations with and without the second order differential term. The calculation by using the simple first order equation presented shorter times to migrate up to the inner wall of the cyclone than by the second order, which theoretically implies higher separation efficiency. Further comparison is now under evaluation in terms of the detailed grade efficiency.

• Progress in Superconductivity
• /
• v.4 no.1
• /
• pp.32-36
• /
• 2002

We have measured the Hall effect in infinite-layer Sr／sub 0.9／La／sub 0.1／$CuO_2$ thin films grown by molecular beam epitaxy. We do not observe $T^{2}$ dependence of the cotangent of Hall angle, which is commonly observed in other cuprate High-Tc superconductors. Therefore, this result cannot be interpreted within two different scattering mechanism based on charge-spin separation theory. The mixed-state Hall effect shows no sign anomaly, implying that tile hydrodynamic contribution of vortex core is negligibly small.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.996-999
• /
• 2010

고압의 가스를 이용하여 고온 가스와 저온 가스를 분리하거나 입자상 물질의 분리에 사용할 수 있는 장치인 볼텍스 튜브의 에너지 분리 특성을 파악하기 위하여 $100Nm^3$/hr급 볼텍스 튜브를 제작하고 이에 대한 실험을 진행하였다. 저온측의 유량비와 오리피스 직경 및 볼텍스 튜브의 길이가 온도에 미치는 영향을 분석하였다. 오리피스 직경 0.6D에서 최적의 온도 분리 효과를 나타내었으며, 0.8D의 경우 그 효과가 미미하였다. 또 한 오리피스 직경이나 길이에 관계없이 저온유량비가 약 0.9부근에서 고온측의 온도가 최고점을 나타내었고, 볼텍스 튜브 길이는 저온측 온도 변화에 미미한 영향을 미치나, 오리피스 직경의 변화는 최저 온도점이 나타나는 저온 유량비에 상당한 영향을 미쳤다. 본 연구의 결과는 $100Nm^3$/hr급 볼텍스 튜브의 최적화를 위한 기초자료로 활용될 수 있을 것이다.

• Journal of computational fluids engineering
• /
• v.16 no.3
• /
• pp.22-28
• /
• 2011

Laminar Flow over an equilateral triangular cylinder is studied for several inflow angles. Under an uniform flow of $Re_d$=50,75,100,125,150, the triangular cylinder is rotated by ${\theta}$=$0^{\circ}$,$15^{\circ}$,$30^{\circ}$,$45^{\circ}$,$60^{\circ}$,$75^{\circ}$,$90^{\circ}$,$105^{\circ}$. The governing equations are solved by the PISO algorithm based on the finite volume method of the unstructured grid system. The effects of the inflow angle on the vortex-shedding flows are investigated. The Strouhal number shows a minimum at ${\theta}$=$60^{\circ}$. It is closely related to the variation of pressure and flow structure induced by the movement of separation points.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.05a
• /
• pp.28-33
• /
• 2001

Animation understanding and time-resolved analysis of the wake characteristic of 2-D sharp plane flows were executed by applying the multi-vision PIV to a sharp plane(three angle of attacks : $15^{\circ}, \; 30^{\circ}, \; 45^{\circ}$) submerged within a circulating water channel($Re = 2{\times}10^4$). The macroscopic shedding patterns were discussed in terms of instantaneous velocity, vorticity, velocity profile, kinetic energy, turbulent intensity, frequency analysis. Particularly, the time-averaged distribution of turbulent intensity in each experimental cases revealed separate island-like small regions magnitude of turbulent intensity was always strengthened.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.800-808
• /
• 2004

Wind tunnel test of an airplane model with forward swept wing was done in KARI LSWT to evaluate and measure the aerodynamic characteristics of initially designed configuration. Since the given wing planform did not fully satisfy the design requirements, local flow control devices such as vortilon, vortex generator and flow fence were used to delay separation and to enhance aerodynamic characteristics. Also decision making processes of design parameters such as vertical tail boom length, the location, size and the incidence angle of horizontal tail were discussed. The general aerodynamic characteristics of forward swept wing for various control surface deflection conditions of flap, aileron and elevator were also given.