• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.51-60
• /
• 2010

This experiment was conducted to investigate the effects of concentrated pig slurry separated from membrane filter and by environment-friendly agro-materials mixtures on growth of lettuce in hydroponics. The swine waste treatment system having a ultra filtration and a reverse osmosis process was designed in this study. Filtration of pig slurry was necessary to prevent the hose clogging in hydroponics. Primary separation using ultra filter was followed by concentration by RO (Reverse Osmosis). The concentrated pig slurry (CS) was mixed by five different environment-friendly agro-materials mixtures. The chemical nutrient solution was the solution of National Horticulture Research Station for the growth of lettuce. The concentration of nutrient solution in hydroponics was adjusted a range of 1.5 mS/cm in EC. The concentrated pig slurry was low in phosphorus(P), suspended solid and heavy matal, but rich in potassium (K). The concentrated slurry was lowest in the growth characteristics of leaf lettuce. And also SPAD value in leaf was reduced in plot treated with concentrated slurry. But the growth of lettuce in the mixtures plot (CS+BM+AA, CS+BM+AA+SW) in hydroponics was significantly high compared to concentrated slurry. The fresh yield of lettuce was 78, 84% that of nutrient solution as 131.9, 142.2g in plot of CS+BM+AA and CS+BM+AA+SW, respectively. Our studies have shown that it is possible to produce organic culture using concentrated slurry and environment-friendly agro-materials mixture, although growth is slower than when using a conventional inorganic hydroponic solution.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.278-285
• /
• 1991

The authors propose to use the slot system in order to improve of the efficiency for the cambered otter boards. The experiment is divided into 2 parts, one is the efficiency model test, and the other is the visualization model test. The hydrodynamic characteristics of the model otter boards were tested by efficiency model test to measure the shearing, drag force of the models and visualization test using hydrogen bubble method to observe the streak-line and time-line of flow around the models, and milk spout method to observe the separation zone in the wake behind the models. This study tested for 5 models such ad without slot, slot position 0.2C, 0.4C, 0.6C and 0.8C. The results obtained are as follows: \circled1 The maximum C sub(L) of model otter board with slot position 0.6C in attack angle 27$^{\circ}$ was the highest of all models, it's value was 1.59. \circled2 In general, the L/D ratio of the one slot otter boards were 16~28% higher than otter board without slot. \circled3 The slot position 0.6C was better than any other slot position, and it's conformed by visiualization. \circled4 As to the model otter board with slot position 0.6C, flow speed of the back side was faster 1.3 to 1.7 times than in the front side. \circled5 The size of the separated zone in case of the model otter board with 0.6C was smaller than that of any other models.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.37-43
• /
• 2017

Domestic sandwich panel buildings are widely used on walls and roofs of factories and warehouse facilities. Factory and warehouse facilities have high fire load and rapid spread of fire due to their use characteristics, leading to large fires. Due to the characteristics of materials, walls and roofs are collapsed, resulting in life damage and property damage. In this regard, this study examined domestic and international standards of sprinkler facilities to prevent ignition of sandwich panel walls. Also, in order to check whether the fire was prevented by installing the head on the wall of the sandwich panel, the fire test was carried out with 10 cm, 60 cm, and 120 cm from the wall along the sprinkler head installation standard of domestic fire safety standards. As a result of the fire test, it was confirmed that the sandwich panel was prevented from igniting when the head of water pressure 0.1 MPa and water quantity K-80 was installed. According to the separation distance, it was impossible to measure the temperature at 10 cm, but at 60 cm, At the maximum temperature of $525^{\circ}C$ and 120 cm, the maximum temperature of the wall of the sandwich panel was measured as $276^{\circ}C$. As a result of the fire test, considering the fire point of 450 degrees Celsius in the fire test of the sandwich panel, the distance from the sandwich panel wall to the combustible is more than 120 cm.

• Korean journal of food and cookery science
• /
• v.17 no.2
• /
• pp.105-116
• /
• 2001

The current status of Korean hospitals on foodservice hygiene was evaluated by a survey in the March of 2000 from 96 hospitals in terms of general sanitation management, education and training, and from 35 hospitals on the observance of hygienic practices in the whole stages of foodservice, personal hygiene, and kitchen equipment and facility hygiene. The questionnaire was filled directly by the dietitian working in the subject hospital. The status of general sanitation management was satisfactory overall; however, the record-keeping or documentation of the practices was the weak point which needs to be improved. only 4% of the subjects appeared to have implemented HACCP for the hospital foodservice. Comparison of the hospitals in their observance rate of hygienic practice by the type of hospital, the location of hospital, the number of bed, and the separation of dietitian's duties as clinical nutrition and foodservice showed characteristic trends among the groups. General hospitals often showed better scores than tertiary hospitals in their observance rates. As the location of hospital moved from large cities to small towns, the observance rate for hygienic practice decreased. Hospitals with entrusted foodservice system showed better scores in hygienic practice than those with owner-operated one in the stage of planning and equipment/facility hygiene (p＜0.05). And the scores of the hospitals having dietitian's duties separated into clinical and food services were higher than the ones with un-separated duties. Detailed information obtained in this study would serve for the development of guidelines or programs to improve the hygienic level of Korean hospital foodservice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.358-365
• /
• 2017

In this paper, we propose an object recognition method using image information to improve the efficiency of visual servoingfor industrial manipulators in industry. This is an image-processing method for real-time responses to an abnormal situation or to external environment change in a work object by utilizing camera-image information of an industrial manipulator. The object recognition method proposed in this paper uses the Otsu method, a thresholding technique based on separation of the V channel containing color information and the S channel, in which it is easy to separate the background from the HSV channel in order to improve the recognition rate of the existing Harris Corner algorithm. Through this study, when the work object is not placed in the correct position due to external factors or from being twisted,the position is calculated and provided to the industrial manipulator.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.3-14
• /
• 2020

Titanium sponge is industrially produced by the Kroll process. In order to understand the importance of the emerging smelting and recycling process, it is necessary to review the conventional production process of titanium. Therefore this paper provides a general overview of the conventional titanium manufacturing system mainly by the Kroll process. The Kroll process can be divided into four sub-processes as follows: (1) Chlorination of raw TiO₂ with coke, by the fluidized bed chlorination or molten salt chlorination (2) Magnesium reduction of TiCl₄ and vacuum distillation of MgCl₂ and Mg by reverse U-type or I-type with reduction-distillation integrated retorts (3) Electrolysis process of MgCl₂ by monopolar cells or multipolar cells to electrolyze into chlorine gas and Mg. (4) Crushing and melting process in which sponge titanium is crushed and then melted in a vacuum arc furnace or an electron beam furnace Although the apparatus and procedures have improved over the past 80 years, the Kroll process is the costly and time-consuming batch operation for the reduction of TiCl₄ and the separation of MgCl₂.

• Journal of the Korean Arthroscopy Society
• /
• v.4 no.2
• /
• pp.138-143
• /
• 2000

Purpose : We analyzed clinical and radiological results of the treatment of osteochondritis dissecans in the femoral condyle under arthroscopic guidance. Materials and Methods : The study group consists 19 cases in 17 patients. Average follow up period was 34 months and average age was 16 years. The cases were classified by 4 different groups, using the fellowing system: Group 1-stable lesion and no specific treatment after arthroscopic examination; Group 2-early separation and multiple drilling; Croup 3-unstable lesion and Herbert screw fixation; Croup 4-loose body removal and/or crater curettage. The results were analyzed by the criteria of Hughston which including clinical and radiologic outcomes. Results : There were 14 cases$(74\%)$ of good and excellent results in 19 knees in which, $75\%$(3/4) in Group 1, $75\%$(3/4) in Group 2, $86\%$(7/8) in Group 3 and $33\%$(1/3) in Group 4. The result of Herbert screw fixation group was better than that of other groups with statistically significant differences. Conclusion : In the treatment of osteochondritis dissecans of skekletally immature patients, arthroscopic finding was reliable guidance in decision of treatment method and active fixation was recommended in patients with large, unstable lesion.

• Cross-Cultural Studies
• /
• v.31
• /
• pp.119-153
• /
• 2013

There is the commonness between I-Ching of Asian scriptures and Analytic Psychology of C. G. Jung as the conjunction of opposites of yin and yang. I-Ching has the base of the Great Absolute(太極) as yin and yang. Jung's psychology has the basic structure of opposite contents of psyche. The former wants to find the proper answer for the situation as fortune book, the latter realization of personal psyche. At this basis to approach I-Ching through the Analytic Psychology can be connected with the screening its inner system and structure in the frame of depth psychology. Basically I-Ching is the scripture about the good or ill luck, regret and stinginess. All of them are related with the psychology of human beings practically. I-Ching as the main scripture of Asia has the core theme concept of the mean (中). Previously mentioned the good or ill luck, regret and stinginess are included into this as the large view point. The best decision between the given situation and the fortune teller pursues the mean(中) path of both. Jung's psychology also attaches importance to the proper balance among personal conscious, unconscious and his surrounded situations. Goodness is relied on the mean, healthy psyche the harmony with the psychological and real situations of a person. But this balance and mean cannot be achieved without any reason but by the result of the conjunction of opposites. The opposites are the Ch'ien(乾, the Creative, Heaven) and K'un(坤, the Receptive, Earth) as yin and yang in I-Ching and the conscious and unconscious in Jung's psychology. These can be opened to masculine and feminine, psyche and matter, transcendent and existence and casuality and acausal synchronicity. Conjunction of these opposites can develope and create the new conscious and creative situation. Finally yin and yang from the Great Absolute and conscious and unconscious from Self become the opposites and go through necessary step of separation and sublimation for the creation of new level. In the Great Absolute there are yin and yang and yin the latter contains the cyclic process which can make the former renew. Conjunction of opposite in Jung's psychology also go through the similar process as the Great Absolute of yin and yang.

• Journal of Sericultural and Entomological Science
• /
• v.45 no.2
• /
• pp.90-95
• /
• 2003

This study was carried out to identify of C3G (cyanidin-3-glucoside) from mulberry fruits and quantify with different varieties. C3G of mulberry fruits was extracted with 1％ HCl-MeOH and purified with open column (5${\times}$90cm) which filled with Amberlite IRC-50 ion exchange resin. The $\lambda$max ranges of the purified C3G on UV/vis spectrum were 516nm and 280nm. Also, molecular weight of C3G from mulberry fruits by LC-Mass was determined as 449. From above results, we concluded that anthocyanin pigment of mulberry fruits was C3G only. The cyanidin-3-glucoside (C3G) was separated and quantified by High Performance Liquid Chromatography (HPLC) system using a Nova-Pack C$\_$18/ column. Mean content of the 35 tested accessions was 0.89％. Also fruity characteristics as well as C3G content to select the desirable mulberry varieties for the production of fruit were researched and analyzed. We selected three suitable varieties such as 'Susungppong', 'Kangsun', and 'Jeolgokchosaeng(Chungpuk)'.

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.162-168
• /
• 2011

In this study, discrimination of shred of frozen and dried Alaska pollack, shred of dried pollack and shred of cod using electronic nose based on mass spectrometer was carried out. Intensities of each fragment from shred of frozen and dried Alaska pollack by e-nose were completely different from those of dried pollack and cod. Each sample was analyzed, and discriminant function analysis was used for the discrimination of similar products. DFA plot indicated a significant separation of each shred of frozen and dried Alaska pollack, shred of dried pollack and shred of cod ($r^2$= 0.7787, F = 185.2). E-nose based on MS system could be used as an efficient method for discriminant of EMA foods.