• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.54-55
• /
• 2010

Vacancy defects in graphene can be created by electron or ion irradiation and those induce ripples which can change the electronic properties of graphene. Recently, the formation of defect structures such as vacancy defects and non-hexagonal rings has been reported in the high resolution transmission electron microscope (HR-TEM) of reduced graphene oxide [1]. In those HR-TEM images, it is noticed that the dislocations with pentagon-heptagon (5-7) pairs are formed and diffuses. Interestingly, it is also observed that two 5-7 pairs are separated and diffuse far away from each other. The separation of 5-7 pairs has been known to be due to their self-diffusion. However, from our tight-binding molecular dynamics simulation, it is found that the separation of 5-7 pairs is due to the diffusion of single vacancy defects and coalescence with 5-7 pairs. The diffusion and coalescence of single vacancy defects is too fast to be observed even in HR-TEM. We also implemented Van der Waals interaction in our tight-binding carbon model to describe correctly bi-layer and multi-layer graphene. The compressibility of graphite along c-axis in our tight-binding calculation is found to be in excellent agreement with experiment. We also discuss the difference between single layer and bi-layer graphene about vacancy diffusion and reconstruction.

• 대한수의학회지
• /
• 제13권1호
• /
• pp.23-30
• /
• 1973

Thin layer, paper and column chromatography were compared for the separation, detection and quantitation of three kinds of estrogen in urine of dairy cows. While thin layer chromatography utilizing silica gel was better for the detection of estrogens, column chromatography using celite 545 was preferable. Spectrophotometry was compared with fluorometry for determination of estrone, estradiol-17 ${\beta}$ and estriol eluted by paper chromatography and column chromatography. Optical density of three standard estrogens showed almost same curve at maximum absorption wave length of 230 and $282m{\mu}$. However, the former showed a higher peak. In fluorometry, the fluorescence intensity of estrone and estradiol-17 ${\beta}$ were rather strong, when the estrogens were dissolved in sulfuric acid, and showed higher sensitivity than that of the spectrophotometry. However, in the case of estriol was exceptional.

• 한국항공우주학회지
• /
• 제34권10호
• /
• pp.16-23
• /
• 2006

저 레이놀즈수에서 NACA 0012 에어포일의 경계층 거동에 관한 연구가 터빈 블레이드와 초소형 비행체에서 적용될 수 있는 경계층을 파악하기 위하여 수행되었다. 레이놀즈수 Re=$2.3{\times}10^4$, $3.3{\times}10^4$, $4.8{\times}10^4$과 정적 받음각 ${\alpha}$=$0^{\circ}$, $3^{\circ}$, $6^{\circ}$에서 경계층을 측정하기 위해 열선 풍속계가 사용되었다. 연구결과는 정적 받음각 =$0^{\circ}$에서는 층류 경계층이 에어포일 표면에 부착되며, 정적 받음각 $3^{\circ}$에서는 경계층 층류 분리가 발생된 것을 보여준다. 더욱이 본 연구에서 경계층 재부착 현상은 정적 받음각 $6^{\circ}$에서 레이놀즈수 $3.3{\times}10^4$와 $4.8{\times}10^4$에서 발생된다.

• 대한수의학회지
• /
• 제29권2호
• /
• pp.33-39
• /
• 1989

Pure separation of various leukocytes is required for the assessment of their roles in immunological and phisiological function. In this study, pure separation of monocytes from canine peripheral blood was attempted. At first, mononuclear cells (PBMC) were separated by ficoll-hypaque gradient method and then monocytes were recovered from PBMC suspensions in sucrose gradient Sol. (PBMC-Sucrose), autologous plasma (PBMC-Plasma) and autologous serum (PBMC-Serum) incubated at $37^{\circ}C$ for 2 hours. 1. In the separation of PBMC by ficoll-hypaque gradient method in canine blood, higher relative centrifugal force (RCF) was required, as high as more than 1,300xg RCF for 40 minutes, for clear formation of PBMC layer than that in human blood as usually used 400xg RCF for 40 minutes. 2. In monocytes-separation from three PBMC suspensions following PBMC separation, recovery-, purity- and viability-rate of monocytes showed better results in PBMC-Plasma and PBMC-Serum than in PBMC-Sucrose suspension, particulary showing better results from PBMC suspensions performed by centrifugation at 1,500xg RCF for 40 minutes.

• 멤브레인
• /
• 제34권4호
• /
• pp.205-215
• /
• 2024

본 연구는 폴리케톤(PK) 지지체를 이용한 유기용매 역삼투(OSRO) 분리막 제조를 목적으로 하였다. 비용매 유도상분리 방법(NIPS)을 통해 PK 지지체를 제작하였고, PK 지지체 위에 polyamide layer를 계면 중합하여 thin-film composite(TFC) 형태로 OSRO 분리막을 완성하였다. 이후 OSRO 분리막의 표면과 단면 구조 및 표면의 화학적 구조를 분석하였고 수투과도와 염 제거율은 각각 약 1.28 LMH/bar와 99.0%의 결과를 얻었다. 또한 OSRO 분리막의 polyamide layer는 유기용매침지 1일 동안 매우 안정적이었고, 단일 유기용매 투과도 경향성은 유기용매 나노여과(OSN) 분리막의 투과도 모델과 일치하였다. OSRO 분리막의 MWCO는 MeOH 상에서 240 g/mol이었다. OSRO 분리막의 MeOH-toluene 혼합용액에 대한 투과도와 separation factor는 상용 OSN 분리막보다 각각 200%와 60%의 높은 결과를 얻었다.

• 오토저널
• /
• 제10권2호
• /
• pp.61-69
• /
• 1988

The finite-difference three-dimensional boundary layer procedure of Chang and Patel is modified and applied to solve the boundary layer development on the automobile surface. The inviscid pressure distribution needed to solve the boundary layer equations is obtained by using a low order panel method. The plane of symmetry boundary layer exhibits the strong streamline divergence up to the midbody and convergence thereafter. The streamline divergence in front of the windshield helps the boundary layer to overcome the sever adverse pressure gradient and avoid the separation. The relaxation of the pressure right after the top of the wind-shield, on the other hand, makes the overly thinned boundary layer to readjust and prompts the streamlines to converge into the symmetry plane before the external streamlines do. The three-dimensional characteristics are less apparent after the midbody and the boundary layer is similar to that of the two-dimensional flow. The results of the off-plane-of-symmetry boundary layer are also presented.

• 대한기계학회논문집
• /
• 제12권4호
• /
• pp.847-864
• /
• 1988

본 연구에서는 연료분출에 박리가 있는 경우와 없는 경우 각각에 대하여 화염 대 근처의 국부가속 현상이 박리에 의하여 어떻게 영향을 받는가를 실험적으로 규명하 고, 나아가서 종래에 행해져 왔던 관련 연구 결과를 재검토할려고 한다.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.697-702
• /
• 2019

In this study, using a wet chemical process, we evaluate the effectiveness of different solution concentrations in removing layers from a solar cell, which is necessary for recovery of high-purity silicon. A 4-step wet etching process is applied to a 6-inch back surface field(BSF) solar cell. The metal electrode is removed in the first and second steps of the process, and the anti-reflection coating(ARC) is removed in the third step. In the fourth step, high purity silicon is recovered by simultaneously removing the emitter and the BSF layer from the solar cell. It is confirmed by inductively coupled plasma mass spectroscopy(ICP-MS) and secondary ion mass spectroscopy(SIMS) analyses that the effectiveness of layer removal increases with increasing chemical concentrations. The purity of silicon recovered through the process, using the optimal concentration for each process, is analyzed using inductively coupled plasma atomic emission spectroscopy(ICP-AES). In addition, the silicon wafer is recovered through optimum etching conditions for silicon recovery, and the solar cell is remanufactured using this recovered silicon wafer. The efficiency of the remanufactured solar cell is very similar to that of a commercial wafer-based solar cell, and sufficient for use in the PV industry.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.703-708
• /
• 2019

In this study, we investigate the relationship between the peeling behavior of the backsheet of a photovoltaic(PV) module and its surface temperature in order facilitate removal of the backsheet from the PV module. At low temperatures, the backsheet does not peel off whereas, at high temperatures, part of the backsheet remains on the surface of the PV module after the peeling process. The backsheet material remaining on the surface of the PV module is confirmed by X-ray diffraction(XRD) analysis to be poly-ethylene(PE). Differential scanning calorimetry(DSC) is also performed to investigate the interfacial characteristics of the layers of the PV module. In particular, DSC provides the melting temperature($T_m$) of laminated ethylene vinyl acetate(EVA) and of the backsheet on the PV module. It is found that the backsheet does not peel off below the $T_m$ of ethylene of EVA, while the PE layer of the backsheet remains on the surface of the PV module above the $T_m$ of the PE. Thus, the backsheet is best removed at a temperature between the $T_m$ of ethylene and that of PE layer.

• 멤브레인
• /
• 제34권4호
• /
• pp.216-223
• /
• 2024

높은 내화학성과 소수성 특성을 갖는 polymethylpentene (PMP) 소재는 polypropylene 소재 대비 결정성이 낮아 dense skin층을 갖는 비대칭 분리막을 제조하기 수월하지만 녹는점이 높아 가공이 용이하지 않다. 본 연구에서는 비용매 유도상분리법(NIPS)과 열유도 상분리법(TIPS)을 혼합한 N-TIPS 법을 활용하여 polymethylpentene (PMP) 고분자 분리막을 제조하고 성능과 특성을 평가하였다. Cyclohexane을 용매로 사용하여 PMP 도프용액을 제조하였으며, 상전이조로 물, EtOH, IPA를 사용하였다. Cyclohexane과 섞이지 않는 물을 비용매로 상전이한 분리막은 TIPS 영향으로 인해 큰 기공과 높은 기체 투과도를 보였으나, 표면이 거칠고 구조가 불안정한 특성을 보였다. 반면, cyclohexane과 혼합될 수 있는 알코올류(ethanol, isopropanol)를 상전이조로 사용한 경우 NIPS 효과로 인해 dense skin층이 형성됨을 확인하며, 높은 기계적 강도를 보였다. 추가적인 기공형성을 위해 polyethylene glycol (PEG)를 첨가한 경우 기체투과도가 높아지는 결과를 얻을 수 있었다.