• 자원리싸이클링
• /
• 제11권3호
• /
• pp.37-45
• /
• 2002

마찰대전 분리는 서로 상이한 두 물체를 마찰시켜 각자 반대극성으로 하전시킨 후 전기장에 통과시켜 분리하는 기술이며, 이때자 물질의 하전극성은 work function에 의해 각기 다른 극성으로 하전된다. 본 연구에서는 마찰대전을 이용한 정전분리에 기본이 되는 각종 플라스틱의 work function을 알아보는 데 중점을 두었으며 마찰대전 후 하전량에 따른 분리 효율을 도출하여 최적의 운전조건을 위한 하전특성을 알아보았다. 플라스틱 시료는 2가지의 샘플을 가지고 실험하였으며. 이를 각기 다른 재질의 드럼형 마찰하전장치를 이용하여 대전을 시켰다. 또한 Faraday Cage를 이용하여 하전량을 측정한 후 work function을 도출하였다. 하전된 입자는 $\pm$20 kV의 전장에 통과시켜 분리실험을 수행하고 이를 통해서 하전량과 분리효율간의 상관관계를 도출하였다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권3호
• /
• pp.88-93
• /
• 2009

Lubricant oil is needed in air conditioning and refrigeration system because the compressor requires oil to prevent surface to surface contact between its moving parts, to remove heat, to provide sealing, to keep out contaminants, to prevent corrosion, and to dispose of debris created by wear. Thus, the oil separation in an oil separator is one of the most important characteristics for proper compressor operation. In this study, a gravity type of oil separator is used. Oil separation characteristics have been investigated for $CO_2$/PAG mixture in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$ at 50 bar and $70^{\circ}C$ to $90^{\circ}C$ at 80 bar. The results obtained indicate that the oil separation is increased with an increase in the oil concentration. It is also found that the oil separation in liquid state is increased with an increase in the mixture temperature while the oil separation in gas state is decreased.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.69-76
• /
• 2020

In the present study, we investigate the flow separation characteristics of a paraglider canopy model by tuft visualization. The experiment is conducted at Re = 3.3×105 in a wind tunnel large enough to contain the three-dimensional paraglider canopy model, where Re is Reynolds number based on the mean chord length and the free-stream velocity. The flow separation characteristics of the canopy model near the wing root are similar to those of a two-dimensional airfoil with a cross-section similar to the model. On the other hand, near the wingtip region, the flow separation is suppressed by the downwash induced by the wingtip vortex. As a result, as the angle of attack increases, the flow separation occurs from the wing root region of the canopy model and develops toward the wingtip.

• 한국가시화정보학회지
• /
• 제17권3호
• /
• pp.46-51
• /
• 2019

Rotor wake interaction must be considered to understand the quadrotor flight, and the rotor separation distance is an important parameter that affects the rotor wake interaction. In this study, the wake characteristics were investigated with varying the rotor separation distance. The velocity field in the rotor wake was measured using digital PIV for hovering mode at Re = 34,000, and the wake boundaries from the inner and outer rotor tips were quantitatively compared with varying the rotor separation distance. The symmetric rotor-tip vortex shedding about the rotor axis was found at a large rotor separation distance. However, the wake boundary became more asymmetric about the rotor axis with decreasing the rotor separation distance. At the minimum rotor separation distance, in particular, a faster vortex decay was observed due to a strong vortex interaction between adjacent rotors.

• 한국주조공학회지
• /
• 제29권1호
• /
• pp.38-44
• /
• 2009

Magnetic separation of Fe contaminated Al-Si cutting chip scraps was performed for the recyclability assessment. It was also aimed to investigate the casting and solidification characteristics of the cutting chip scraps. The magnetically separated cutting chip scraps were adequately treated for the casting procedure and test specimens were made into a stepped mold inducing different cooling rates. The test specimens were evaluated by the combined analysis of ICP, Spectroscopy, OM-image analyzer, SEM/EDS, etc. Solidification characteristics of cutting chip scraps were examined as functions of Fe content and cooling rate. It is concluded that the magnetic separation process can be utilized to recycle the Fe contaminated Al-Si cutting chip scraps in the high cooling rate foundry process.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1337-1342
• /
• 1998

To investigate an effect of phase separation on precipitation characteristics of ZnS microcrystals in ma-trix glass ZnS doped borosilicate glasses for nonlinear optical applications were prepared by melting and pre-cipitation process. ZnS dopant contributed to phase separation promotion which increased the phase separa-tion of the matrix glass within immiscibility region. It was also found that ZnS as phase separation promoter showed a similar contribution for some selected glass compositions in miscibility region. The precipitation of ZnS microcrystals occurred in thephase separable glass compoitions. The radius of ZnS microcrystals in-creased with increasing the heat treatment temperature and Na2O contents of matrix glass composition. The ZnS particle sizes estimated by effective mass approximation ranged from about 30 to 80${\AA}$ It was suf-ficiently small to show quantum confinement effect.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.73-78
• /
• 2003

In this Study, we examined the influence of characteristics of rolling loads by casters on separation resistance of substrate concrete and synthetic resin floor coating. In the experiment, we first prepared floor samples having substrate concrete of various compressive strength, surface hardness and surface configurations, then put the coated samples to the test of separation resistance with Rolling Caster Loading Machine. Three loading conditions consisted of different kinds of casters, rolling conditions, and coating materials. Consequently, we clarified that the grade of separation resistance varied widely according to the characteristics of substrate concrete and rolling loads.

• KSBB Journal
• /
• 제4권3호
• /
• pp.281-287
• /
• 1989

The experimental study reported herein was to investigate to separation characteristics of a tangential flow membrane in a continuous recycle situation. Physical and dynamic analyses are performed on the membrane system in order to relate relevant variables to the capacity of separation. The results of separation process may be summarized by a proposed equation:Sh=A(Re.Sc.dh/L)1/3. It was shown also by the analyses that effective separation of sugar and cell was attainable by means of tangential membranes, thereby enhancing ethanol productivity in fermentation with continuous cell and substrate recycle.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1146-1153
• /
• 1996

The properties of FRP(fiber-reinforced plastics) depend not only on the characteristics of the matrix but also on the structure of fiber mat and the fiber type of reinforcement. Therefore it is very important to study the characteristics of reinforcement and matrix. In this paper, a method is proposed which can be used to measure the mean coeffcient of separation for the press molding of FRP, and the mean equivalent coefficient of separation is obtained from the separation coefficient. And the relationship between the mean equivalent coefficient of separation and the structure of fiber mat is discussed. The effects of corrlelation coefficient between separation and orientation on the mean equivalent coefficient are also presented.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.118-124
• /
• 2016

The shape and location of the cutoff shield in a projection-type headlight system were optimized by a ray-tracing technique. A shield based on a Petsval surface showed better cutoff characteristics than a flat or cylindrical shield, such as a sharp intensity gradient and less color separation at the cutoff line. Adjustment of the shield’s location between the reflector and the aspheric lens further improved its cutoff characteristics.