• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.741-751
• /
• 1996

The coupled conduction and convection heat transfer from the protruding heat source in a vertical channel is numerically investigated. Conjugate solution of the two-dimensional energy equation is obtained for the incompressible air flow over the rectangular block with local heat source. It was found that several recirculation zones and separation bubble near the block were related to Re and Gr. And the results show that fractions of the heat transfer through each of the block face, maximum temperature of the block and the relative effect of each parameter on the maximum temperature and heat transfer.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권2호
• /
• pp.111-119
• /
• 2016

기체-액체 이상유동의 거동 시뮬레이션을 위해 Lattice Boltzmann방법(LBM)을 이용하였다. 기체-액체사이의 경계면에서 상호포텐셜 모델인 Shen-Chan방식과 Carnahan-Starling 상태방정식을 도입하였다. 또한 외력항의 처리는 Exact Difference Method를 사용하였다. 개발된 코드를 통하여 상태방정식 특성파악, 기체-액체의 상분리, 표면장력 및 기체 액체 경계면 거동 특성, Homogeneous와 Heterogeneous 캐비테이션, 기포 붕괴등의 시뮬레이션을 수행하였다.

• 한국가시화정보학회지
• /
• 제7권2호
• /
• pp.12-16
• /
• 2010

The effect of vortex generators to manipulate the separated flow region behind the vertical fence was experimentally investigated. The experiments were performed in the circulating water channel. The parameters used in this study were the distance between the fence and vortex generators and size of vortex generators. Digital PIV method was applied to measure the instantaneous velocity fields around the fence. And the obtained flow properties were compared with those of fence How without the vortex generators. The obtained results quantitatively shows the specific size and distance of vortex generators which were effective to reduce the mean reattachment length of separation bubble behind the fence.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1619-1624
• /
• 2004

Experimental study of separated flow over a NACA0012 airfoil is conducted at $Re=2{\times}10^5$ when periodic wakes pass over the airfoil. The wakes are periodically generated by circular cylinders upstream of the airfoil. The measurement of surface pressure and surface visualization at various angles of attack are carried out without and with passing wakes. Without passing wakes, a separation bubble at the leading edge of the suction surface is formed at an angle of attack, found from a local plateau in the streamwise pressure distribution and two distinct lines in the surface flow visualization. With passing wakes, however, the bubble disappears. Owing to passing wakes, the lift increases at high angle of attack and the angle of stall also increases.

• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.53-57
• /
• 2015

For improving the efficiency of near space propellers working over 20km, performances of their streamwise sections, i.e. low-Reynolds-number airfoils which work at $10^4-10^5$ Reynolds numbers, are significant. Based on the low-Reynolds-number CFD technology, this paper designs a novel low-Reynolds-number airfoil. Unsteady characteristics of the laminar separation bubble on novel airfoil and a typical conventional airfoil are studied numerically, and the Reynolds number effect is investigated. Results show that at $10^4-10^5$ Reynolds numbers, unsteady aerodynamic characteristics of the novel airfoil are severely weakened and its lift-to-drag ratio can increase about 100%.

• 한국가시화정보학회지
• /
• 제6권1호
• /
• pp.53-58
• /
• 2008

We carried out the experiments which controled the periodic jet in front of the fence to alter the fence wake. The experiments were performed in circulating water channel and the vertical fence was submerged in the boundary layer. The frequency, jet nozzle distance and speed of jet passing the slit were investigated. Each case divided into 20 phases and phase-averaged results were compared with uncontrolled fence flow. From the results, we found the specific frequency and nozzle distance which were good for reducing the reattachment length. In this case, the reattachment length was decreased 35% compared with the uncontrolled fence flow.

• 대한기계학회논문집B
• /
• 제26권2호
• /
• pp.353-361
• /
• 2002

An experimental study was made of turbulent separated and reattaching flow over a blunt body, where unsteady wake was generated by a spoke wheel-type wake generator with cylindrical rods. The influence of unsteady wake was scrutinized by altering the rotating direction (CW and CCW) and the normalized passing frequency (0 St$\_$H/ 0.20). The Reynolds number based on the cylindrical rod was Re$\_$d/=375. A phase-averaging technique was employed to characterize the unsteady wake. The effect of different rotating directions was examined in detail, which gave a significant reduction of x$\_$R/. The wall pressure fluctuations on the blunt body were analysed in terms of the spectrum and the coherence.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 추계학술발표대회 요약집
• /
• pp.81.1-81.1
• /
• 2003

• 멤브레인
• /
• 제26권1호
• /
• pp.38-42
• /
• 2016

올레핀/파라핀 혼합 기체의 분리를 위한 올레핀 촉진 수송 분리막의 제조를 위해 amide 작용기를 가지며 glassy한 특성을 보이는 polyvinylpyrrolidone (PVP) 고분자를 분리막의 matrix로서 사용하였다. 분리막의 기체 투과 실험은 propylene과 propane 50 : 50의 부피비로 혼합된 기체를 사용하였고, bubble meter와 gas chromatography를 사용해 투과도와 선택도를 측정하였다. 또한 SEM image와 FT-IR을 통해 막의 특성을 조사하였다. 100시간의 장시간 성능 측정 결과 선택도는 약 15, 투과도는 약 1.3 GPU 이상을 각각 유지하였다. 기존의 poly(2-ethyl-2-oxazoline) $(POZ)/AgBF_4/Al(NO_3)_3$ 분리막과 비교함으로써, 고분자 matrix로서의 PVP 특성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제12권2호
• /
• pp.46-56
• /
• 1988

The author has presented a new approach to design hydrofoil section shapes in consideration of viscous for marine propeller blades. In suction sides of propeller blades, the pressure distribution on hydrofoil sections in non-cavitating flow should be examined before the study of cavitation characteristics. Generally, the calculation results for hydrofoil conformal mapping method by which neglect viscous effects do not agree with experimental ones. Moreover, another papers reported that laminar separation bubble and transition played an important role on the cavitation inception. From these considerations, it is very important to study the viscous effects of the hydrofoil sections, especially the mechanism separation bubble and the apparent thickness of hydrofoil section. Therefore, the new design method of hydrofoil sections in consideration of viscous effects in comparison to the airfoil section should be studied. In designing the new hydrofoil section shapes, based on Eppler theory, the author tried to give the peak negative pressure in leading edge region for NACA airfoil in consideration of viscous effects without turbulent boundary layer separation as much as possible. The design method was verified from the fact that the boundary characteristics was improved and the lifts of new hydrofoils were slightly in creased in comparison to these of NACA 16-012 symmetrical, NACA 4412 non-symmetrical airfoils.